Startseite The stiffness modulus in Norway spruce as a function of year ring
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

The stiffness modulus in Norway spruce as a function of year ring

  • Tiina Koponen , Timo Karppinen , Edward Hæggström , Pekka Saranpää und Ritva Serimaa
Veröffentlicht/Copyright: 5. Juli 2005
Veröffentlichen auch Sie bei De Gruyter Brill
Holzforschung
Aus der Zeitschrift Band 59 Heft 4

Abstract

The elastic properties of Norway spruce were studied by means of ultrasound. Samples were from stems that were grown either at a medium- or a high-fertility site in Finland. The stiffness modulus was determined in the longitudinal, radial, and tangential directions as a function of the distance from the pith using 1-mm-thick samples. Tangentially cut samples contained only earlywood, while radially and longitudinally cut samples contained both earlywood and latewood. The stiffness modulus in the longitudinal direction for Norway spruce grown at a medium-fertility site increased with distance from the pith from 6±1 to 8.5±1 GPa. This parameter increased as the mean microfibril angle decreased. In the radial and tangential directions, the stiffness modulus was nearly constant, at 1±0.15 and 0.35±0.04 GPa, respectively. The longitudinal stiffness modulus of fast-growing clonal trees, which contained a large share of juvenile wood and were growing on a fertile site, was ca. 30% smaller (4±1 GPa near the pith and 6±1 GPa at the age of 12 years) than that of trees on a medium-fertility site. No difference was found in the radial and tangential stiffness modulus between stems grown at the two sites.

:

Corresponding author. Department of Physical Sciences, P.O. Box 64, FI-00014 University of Helsinki, Helsinki, Finland

References

Anderson, O.L., Liebermann, R.C. (1968) Sound velocities in rocks and minerals. In: Physical Acoustics – Principles and Methods, Vol. IV B. Ed. Mason, W.P. Academic Press, New York. pp. 341–344.Suche in Google Scholar

Andersson, S., Serimaa, R., Saranpää, P., Pesonen, E., Paakkari, T. (2003) The crystallinity of wood and the size of cellulose crystallites in Norway spruce. J. Wood Sci.49:531–537.10.1007/s10086-003-0518-xSuche in Google Scholar

Andersson, S., Wikberg, H., Pesonen, E., Maunu, S.-L., Serimaa, R. (2004) Studies of crystallinity of Scots pine and Norway spruce cellulose. Trees18:346–353.10.1007/s00468-003-0312-9Suche in Google Scholar

Astley, R.J., Stol, K.A, Harrington, J.J. (1998) Modeling the elastic properties of softwood, Part II: The cellular microstructure. Holz Roh- Werkstoff56:43–50.10.1007/s001070050262Suche in Google Scholar

Bendtsen, B.A., Senft, J. (1986) Mechanical and anatomical properties in individual growth rings of plantation-grown eastern cottonwood and loblolly pine. Wood Fiber Sci.18:23–38.Suche in Google Scholar

Bodig, J., Goodman, J.R. (1973) Prediction of elastic parameters for wood. Wood Sci.5:249–264.Suche in Google Scholar

Bucur, V. (1983) An ultrasonic method for measuring the elastic constants of wood increment cores from living trees. Ultrasonics 5:116–126.10.1016/0041-624X(83)90031-8Suche in Google Scholar

Bucur, V. (1999) Acoustics as a tool for the nondestructive testing of wood. www.ndt.net/article/v04n11/bucur/bucur.htm.Suche in Google Scholar

Bucur, V. (2003) Techniques for high resolution imaging of wood structure: A review. Meas. Sci. Technol.14:R91–R98.10.1088/0957-0233/14/12/R01Suche in Google Scholar

Bucur, V., Archer, R.R. (1984) Elastic constants for wood by an ultrasonic method. Wood Sci. Technol.18:255–265.10.1007/BF00353361Suche in Google Scholar

Bucur, V., Lanceleur P., Roge B. (2002) Acoustic properties of wood in tridimensional representation of slowness surfaces. Ultrasonics 40:537–541.10.1016/S0041-624X(02)00182-8Suche in Google Scholar

Cave, I.D., Hutt, L. (1969) The longitudinal Young's modulus of Pinus radiata. Wood Sci. Technol.3:40–48.10.1007/BF00349983Suche in Google Scholar

Cave, I.D., Walker, J.C.F. (1994) Stiffness of wood in fast-grown plantation softwoods: The influence of microfibril angle. For. Prod. J.44:43–48.Suche in Google Scholar

Downes, G.M., Nyakuengama, J.G., Evans, R., Northway, R., Blakemore, P., Dickson, R.L., Lausberg, M. (2002) Relationship between wood density, microfibril angle and stiffness in thinned and fertilized Pinus radiata. IAWA J.23:253–256.10.1163/22941932-90000302Suche in Google Scholar

Gindl, W., Teischinger, A. (2002) Axial compression strength of Norway spruce related to structural variability and lignin content. Composites A33:1623–1628.10.1016/S1359-835X(02)00182-3Suche in Google Scholar

Gindl, W., Gupta, H.S., Grünwald, C. (2002) Lignification of spruce tracheid secondary cell walls related to longitudinal hardness and modulus of elasticity using nano-indentation. Can. J. Bot.80:1029–1033.10.1139/b02-091Suche in Google Scholar

Gustavsen, H.G. (1980) Site index curves for conifer stands in Finland. Folia For.454:1–31.Suche in Google Scholar

Frühmann, K., Burgert, I., Stanzl-Tschegg, S.E., Tschegg, E.K. (2003) Mode I fracture behavior on the growth ring scale and cellular level of spruce (Picea abies[L.] Karst.) and beech (Fagus sylvatica L.) loaded in the TR crack propagation system. Holzforschung57:653–660.Suche in Google Scholar

Huang, C.-L., Lindström, H., Nakada, R., Ralston, J. (2003) Cell wall structure and wood properties determined by acoustics – a selective review. Holz Roh- Werkstoff61:321–335.10.1007/s00107-003-0398-1Suche in Google Scholar

Ilic, J. (2003) Dynamic MOE of 55 species using small wood beams. Holz Roh- Werkstoff61:167–172.10.1007/s00107-003-0367-8Suche in Google Scholar

Jayawickrama, K.J.S. (2000) Breeding radiata pine for wood stiffness: review and analysis. Aust. For.64:51–56.Suche in Google Scholar

Keckes, J., Burgert, I., Frühmann, K., Müller, M., Kölln, K., Hamilton, M., Burghammer, M., Stanzl-Tschegg, S., Fratzl, P. (2003) Cell-wall recovery after irreversible deformation of wood. Nat. Mater.2:810–814.10.1038/nmat1019Suche in Google Scholar PubMed

Kennedy, R.W. (1995) Coniferous wood quality in the future – concerns and strategies. Wood Sci. Technol.29:321–338.10.1007/BF00202581Suche in Google Scholar

Lindström, H., Harris, P., Nakada, R. (2002) Methods for measuring stiffness of young trees. Holz Roh- Werkstoff60:165–174.10.1007/s00107-002-0292-2Suche in Google Scholar

Page, D.H., El-Hosseiny, F., Winkler, K., Lancaster, A.P.S. (1977) Elastic modulus of single wood pulp fibers. Tappi60:114–117.Suche in Google Scholar

Panshin, A.J., de Zeeuw, C. (1980) Textbook of Wood Technology. McGraw-Hill, New York.Suche in Google Scholar

Persson, K. (2000) Micromechanical modelling of wood and fibre properties. Doctoral Thesis, Lund University, Sweden.Suche in Google Scholar

Sarén, M.P., Andersson, S., Serimaa, R., Paakkari, T., Saranpää, P., Pesonen, E. (2001) Structural variation of tracheids in Norway spruce (Picea abies[L.] Karst.). J. Struct. Biol.136(2):101–109.10.1006/jsbi.2001.4434Suche in Google Scholar PubMed

Sarén, M.P., Serimaa, R., Andersson, S., Saranpää, P., Keckes, J., Fratzl, P. (2004) Effect of growth rate on mean microfibril angle and cross-sectional shape of tracheids of Norway spruce. Trees Struct. Funct.18:354–362.10.1007/s00468-003-0313-8Suche in Google Scholar

Verkasalo, E. (1992) Relationships of the modulus of elasticity and the structure of Finnish Scots pine wood. Silva Fennica26(3):155–168.10.14214/sf.a15644Suche in Google Scholar

Verkasalo, E., Leban, J.M. (2002) MOE and MOR in static bending of small clear specimens of Scots pine, Norway spruce and European fir from Finland and France and their prediction for the comparison of wood quality. Pap. Timber84(5):332–340.Suche in Google Scholar

Yang, J.L., Evans, R. (2003) Prediction of MOE of eucalypt wood from microfibril angle and density. Holz Roh- Werkstoff61:449–452.10.1007/s00107-003-0424-3Suche in Google Scholar

Published Online: 2005-07-05
Published in Print: 2005-07-01

© Walter de Gruyter Berlin New York

Artikel in diesem Heft

  1. Chemical changes in silver birch (Betula pendula Roth) wood caused by hydrogen peroxide bleaching and monitored by color measurement (CIELab) and UV-Vis, FTIR and UVRR spectroscopy
  2. Hydrophobisation and densification of wood by different chemical treatments
  3. Functionalisation of wood by reaction with 3-isocyanatopropyltriethoxysilane: Grafting and hydrolysis of the triethoxysilane end groups
  4. Isolation and fractionation of lignosulfonates by amine extraction and ultrafiltration: A comparative study
  5. Bioactive phenolic substances in industrially important tree species. Part 4: Identification of two new 7-hydroxy divanillyl butyrolactol lignans in some spruce, fir, and pine species
  6. Characterization of physiological functions of sapwood IV: Formation and accumulation of lignans in sapwood of Cryptomeria japonica (L.f.) D. Don after felling
  7. X-ray scattering studies of thermally modified Scots pine (Pinus sylvestris L.)
  8. Differences in acoustic velocity by resonance and transit-time methods in an anisotropic laminated wood medium
  9. Parallel-plate rheology of latex films bonded to wood
  10. An assessment of the feasibility of ultrasound as a defect detector in lumber
  11. Vibrational properties of green wood in high-temperature water vapor
  12. The stiffness modulus in Norway spruce as a function of year ring
  13. Strain analysis in bulk forming of wood
  14. Decay fungi from playground wood products in service using 28S rDNA sequence analysis
  15. Effect of climatic variables on chromated copper arsenate (CCA) leaching during above-ground exposure
  16. Protic ionic liquids with organic anion as wood preservative
Heruntergeladen am 6.11.2025 von https://www.degruyterbrill.com/document/doi/10.1515/HF.2005.074/html?lang=de
Button zum nach oben scrollen