Home Physical Sciences Direct Effects of Wood Characteristics on Pulp and Handsheet Properties of Eucalyptus globulus
Article
Licensed
Unlicensed Requires Authentication

Direct Effects of Wood Characteristics on Pulp and Handsheet Properties of Eucalyptus globulus

  • R. Wimmer , G.M. Downes , R. Evans , G. Rasmussen and J. French
Published/Copyright: June 1, 2005
Holzforschung
From the journal Volume 56 Issue 3

Summary

Fibre length, microfibril angle and wood density were measured in eight-year-old Eucalyptus globulus clones planted on three different sites. Samples were chipped and pulped, and the pulps beaten prior to preparation of 60g/m2 handsheets. Eleven physical handsheet properties, together with pulp freeness, were measured using standard methods. Direct relationships between wood properties and pulp/paper properties were studied using path analysis.

Fibre length had a strong, direct effect on tear index, bending stiffness, freeness, pulp yield and active alkali consumption. Wood density was a strong predictor of most handsheet properties: high density woods produced bulkier, more porous sheets with higher bending stiffness, while lower density woods produced smoother, denser sheets with higher tensile strength.The effect of microfibril angle was small and more evident in handsheets made from beaten pulp.

:
Published Online: 2005-06-01
Published in Print: 2002-04-29

Copyright © 2002 by Walter de Gruyter GmbH & Co. KG

Articles in the same Issue

  1. Weight Loss and Cell Wall Degradation in Rubberwood Caused by Sapstain Fungus Botryodiplodia theobromae
  2. Changes of EPR Spectra of Wood Impregnated with Copper-Based Preservatives during Exposure to Several Wood-Rotting Fungi
  3. Quantitative Analyses of Morphological Variation of Cross-Sectional Tracheids of Hinoki (Chamaecyparis obtusa Endl.) Near Knot by Image Processing
  4. Direct Effects of Wood Characteristics on Pulp and Handsheet Properties of Eucalyptus globulus
  5. Identification of the Lignan Nortrachelogenin in Knot and Branch Heartwood of Scots Pine (Pinus sylvestris L.)
  6. Chemical Composition of Lipophilic and Phenolic Constituents of Barks from Pinus nigra, Abies bornmülleriana and Castanea sativa
  7. Pinus pinaster Oleoresin in Plus Trees
  8. Determination of Polyphenolic Content of Bark Extracts for Wood Adhesives
  9. Softwood Bark Pyrolysis Oil-PF Resols. Part 2. Thermal Analysis by DSC and TG
  10. Softwood Bark Pyrolysis Oil-PF Resols. Part 3. Use of Propylene Carbonate as Resin Cure Accelerator
  11. Steam Explosion of Aspen Wood. Characterisation of Reaction Products
  12. Characterization of Black Liquors from Soda-AQ Pulping of Reed Canary Grass (Phalaris arundinacea L.)
  13. Modification of the Nitrogen Content and C:N Ratio of Sitka Spruce Timber by Kiln and Air Drying
  14. High Resolution Measurement of the Surface Layer Moisture Content during Drying of Wood Using a Novel Magnetic Resonance Imaging Technique
  15. Longitudinal Permeability and Diffusivity of Steam in Beech Determined with a Wicke-Kallenbach-Cell
  16. UF/pMDI Wood Adhesives: Networks Blend versus Copolymerization
Downloaded on 2.2.2026 from https://www.degruyterbrill.com/document/doi/10.1515/HF.2002.040/html
Scroll to top button