Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization
-
Chung-Ho Chen
Veröffentlicht/Copyright:
11. März 2010
Abstract
To run a production processes an appropriate target for the process mean has to be fixed, for presenting process capability a suitable target for a process capability index has to be selected. Generally, the two targets are fixed independently. This paper presents a method which combines both targets with respect to process mean and process capability under a fuzzy environment. By defining linear membership functions for relaxing the strict conditions on the above given two targets, a minimax approach is used for obtaining a solution of the problem.
Published Online: 2010-03-11
Published in Print: 2002-April
© Heldermann Verlag
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Optimal Minimal Maintenance of Multistage Degraded System with Repairs
- Performability of Two Modules in Series
- Process Targeting for Optimal Capability when the Product is Subject to Degradation
- Optimal np Control Charts with Variable Sample Sizes or Variable Sampling Intervals
- A Process Control Plan with Two-Phase Inspection
- A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization
- Prediction Intervals, Tolerance Intervals and Standards in Quality Control - Part 1
- Comparison of Semi-Economic and -R Control Charts for Non-Ageing and Ageing Process
- Modelling of Explosives Sensitivity Part 1: The Bruceton Method
Schlagwörter für diesen Artikel
Target Value;
Process Capability Index (PCI);
Fuzzy Set;
Membership Function
Artikel in diesem Heft
- Optimal Minimal Maintenance of Multistage Degraded System with Repairs
- Performability of Two Modules in Series
- Process Targeting for Optimal Capability when the Product is Subject to Degradation
- Optimal np Control Charts with Variable Sample Sizes or Variable Sampling Intervals
- A Process Control Plan with Two-Phase Inspection
- A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization
- Prediction Intervals, Tolerance Intervals and Standards in Quality Control - Part 1
- Comparison of Semi-Economic and -R Control Charts for Non-Ageing and Ageing Process
- Modelling of Explosives Sensitivity Part 1: The Bruceton Method
