Home The influence of Nd on the corrosion behavior of electroless-deposited Fe–P
Article
Licensed
Unlicensed Requires Authentication

The influence of Nd on the corrosion behavior of electroless-deposited Fe–P

  • Yan Meng , Ling-Ling Wang , Gui-Fang Huang , Wei-Qing Huang and Bing-Suo Zou
Published/Copyright: May 23, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 98 Issue 3

Abstract

Fe – Nd – P layers were prepared by electroless deposition. Discussed in this paper is the influence of the rare earth element Nd on the deposition rate, mixed potential, anti-corrosion performance, structure, and surface morphology of the deposit. The results show that the deposition rate increases with the addition of Nd and the increment can be as high as 30 %. The addition of Nd also improves the homogeneity of the deposit, eliminates pores, and reduces the particle size. Electroless Fe – P deposits incorporated with Nd also exhibit significantly improved anti-corrosion performance, especially in alkaline media.

Keywords: Electroless plating; Rare earth alloying; Corrosion resistance
* Correspondence address, Prof. Dr. Ling-Ling Wang, Department of Applied Physics, Hunan University, Changsha, 410082, China, Tel.: +086 731 882 1840, Fax: +086 731 882 2332, E-mail:

References

[1] A.Ludwig, E.Quandt: J. Appl. Phys.87 (2000) 469.10.1063/1.373132Search in Google Scholar

[2] K.-M.Yin, B.-T.Lin: Surf. Coat. Tech.78 (1996) 205.10.1016/0257-8972(94)02410-3Search in Google Scholar

[3] W.Arabczyk, U.Narkiewicz, D.Moszynâski: Appl. Catal. A-Gen.182 (1999) 379.10.1016/S0926-860X(99)00034-4Search in Google Scholar

[4] A.RüdigerU.Köster: Mat. Sci. Eng.294–296 (2000) 890.10.1016/S0921-5093(00)01037-6Search in Google Scholar

[5] S.J.Pang, T.Zhang, K.Asami: Corros. Sci.44 (2002) 1847.10.1016/S0010-938X(02)00002-1Search in Google Scholar

[6] A.Brenner, G.J.Riddell: National Bureau of Standards, Vol. XXXVII (1946) 31.10.6028/jres.037.019Search in Google Scholar

[7] W.Fernengel, W.Rodewald, R.Blank, P.Schrey, M.Katter, B.Wall: J. magn. magn mater.196–197 (1999) 288.Search in Google Scholar

[8] S.J.Pang, T.Zhang, K.Asami: Acta Mater.50 (2002) 489.10.1016/S1359-6454(01)00366-4Search in Google Scholar

[9] P.Tartaj, T.Glez-Carren, O.Bomati-Migue, etal.: Phys. Rev. B69 (2004) 094401-1-8.10.1103/PhysRevB.69.094401Search in Google Scholar

[10] C.Ruscior, E.Croiala: J. Electrochem. Soc.18 (1971) 696.10.1149/1.2408146Search in Google Scholar

[11] C.M.Chu, J.Chin: Inst. Chem. Engrs.34 (2003) 689.Search in Google Scholar

[12] L.S.Sanches, S.H.Domingues, A.Carubelli, L.H.Mascaro: J. Braz. Chem. Soc.14 (2003) 556.10.1590/S0103-50532003000400011Search in Google Scholar

[13] G.Blackwood, B.Balakrisnan, Y.Z.Huang, C.K.Tan: J. magn. magn. mater.223 (2001) 103.10.1016/S0304-8853(00)00716-2Search in Google Scholar

[14] F.S.Hoor, C.L.Aravinda, M.F.Ahmed, S.M.Mayanna: J. Power Sources103 (2001) 147.10.1016/S0378-7753(01)00824-2Search in Google Scholar

[15] W.-Y.Ching, Y.-N.Xu: J. magn. magn. mater.209 (2000) 28.10.1016/S0304-8853(99)00638-1Search in Google Scholar

[16] S.H.Choi, J.H.Oh, T.Ko: J. magn. magn mater.272–276 (2004) 2233.Search in Google Scholar

[17] F.E.Atalay: J. magn. magn. mater.272–276 (2004) 2415.10.1016/j.jmmm.2003.12.842Search in Google Scholar

[18] B.W.Zhang, H.W.Xie: Mater. Sci. Eng. A281 (2000) 286.10.1016/S0921-5093(99)00720-0Search in Google Scholar

[19] K.D.Sen, P. C.Schmidt, A.Weiss: Theoretical Chemistry Accounts: Theory, Computation, and Modeling58 (1980) 69.Search in Google Scholar

[20] T.-Y.Chan, S.-T.Lin: J. Mater. Process. Tech.89–90 (1999) 165.Search in Google Scholar

Received: 2006-5-22
Accepted: 2006-12-11
Published Online: 2013-05-23
Published in Print: 2007-03-01

© 2007, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. Texture and microstructure evolution of ECAP processed AlMg1Mn0.14 alloy
  5. Modelling grain refinement in fcc metals during equal-channel angular pressing by route “C”
  6. Fabrication of high strength nanostructured aluminium alloys by hydrostatic extrusion
  7. Comparison of the plastic strain distribution during equal-channel angular pressing (ECAP) using 2D and 3D FEM modeling
  8. Deformation twins in ultrafine grained commercial aluminum
  9. Compressive behaviour of ultrafine-grained AA6063T6 over a wide range of strains and strain rates
  10. Grain refinement response during twist extrusion of an Al-0.13% Mg alloy
  11. Preparation of NiO–LiFeO2 solid solutions: the role of mechanical and thermal treatments
  12. Applied
  13. Fatigue strength and fracture behavior of steels with and without interstitial carbon at room temperature in air
  14. The influence of Nd on the corrosion behavior of electroless-deposited Fe–P
  15. Time-dependent directional solidification of binary Al–Cu alloys in the initial transient
  16. Effect of V2O5 doping on the microstructure and local composition of textured Sr0.4Ba0.6Nb2O6 ceramics
  17. Microstructure and mechanical properties of AZ91D alloy prepared by a semi-solid diecasting process
  18. Development of SMD 32.768 kHz tuning fork type crystals
  19. Notifications
  20. DGM News
https://doi.org/10.3139/146.101456
Keywords for this article
Electroless plating; Rare earth alloying; Corrosion resistance

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. Texture and microstructure evolution of ECAP processed AlMg1Mn0.14 alloy
  5. Modelling grain refinement in fcc metals during equal-channel angular pressing by route “C”
  6. Fabrication of high strength nanostructured aluminium alloys by hydrostatic extrusion
  7. Comparison of the plastic strain distribution during equal-channel angular pressing (ECAP) using 2D and 3D FEM modeling
  8. Deformation twins in ultrafine grained commercial aluminum
  9. Compressive behaviour of ultrafine-grained AA6063T6 over a wide range of strains and strain rates
  10. Grain refinement response during twist extrusion of an Al-0.13% Mg alloy
  11. Preparation of NiO–LiFeO2 solid solutions: the role of mechanical and thermal treatments
  12. Applied
  13. Fatigue strength and fracture behavior of steels with and without interstitial carbon at room temperature in air
  14. The influence of Nd on the corrosion behavior of electroless-deposited Fe–P
  15. Time-dependent directional solidification of binary Al–Cu alloys in the initial transient
  16. Effect of V2O5 doping on the microstructure and local composition of textured Sr0.4Ba0.6Nb2O6 ceramics
  17. Microstructure and mechanical properties of AZ91D alloy prepared by a semi-solid diecasting process
  18. Development of SMD 32.768 kHz tuning fork type crystals
  19. Notifications
  20. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 13.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.101456/html
Scroll to top button