Home Prof. Dr. Günter Gottstein
Article
Licensed
Unlicensed Requires Authentication

Prof. Dr. Günter Gottstein

Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 100 Issue 4

Published Online: 2013-06-11
Published in Print: 2009-04-01

© 2009, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr. Günter Gottstein
  5. Feature
  6. Interface Migration in Metals (IMM):“Vingt Ans Après” (Twenty Years Later)
  7. Basic
  8. On the solute-defect interaction in the framework of a defactant concept
  9. A new model of dynamic recovery for Stage III of pure fcc metals without cross slip
  10. Sequence of distinct microyielding stages of the monocrystalline nickel-base superalloy CMSX-6 at high temperatures
  11. Comparison of texture evolution in fcc metals predicted by various grain cluster homogenization schemes
  12. Recrystallization initiated by low-temperature grain boundary motion coupled to stress
  13. Sub-grain boundary mobilities during recovery of binary Al–Mn alloys
  14. Concentration phase transition associated with grain boundary segregation in systems with restricted solubility
  15. Second-order faceting–roughening of the tilt grain boundary in zinc
  16. A model of grain boundary diffusion in polycrystals with evolving microstructure
  17. Linear measures for polyhedral networks
  18. Testing a curvature driven moving finite element grain growth model with the generalized three dimensional von Neumann relation
  19. Grain-boundary source/sink behavior for point defects: An atomistic simulation study
  20. Applied
  21. Deformation modes and anisotropy in magnesium alloy AZ31
  22. Control of recrystallisation texture and texture-related properties in industrial production of aluminium sheet
  23. The combined effect of static recrystallization and twinning on texture in magnesium alloys AM30 and AZ31
  24. Comparison of damage development depending on the local microstructure in low alloyed Al-TRIP-steels, IF steel and a DP steel
  25. Nanoindentation of Ti50Ni48Fe2 and Ti50Ni40Cu10 shape memory alloys
  26. Early detection of crack initiation sites in TiAl alloys during low-cycle fatigue at high temperatures utilizing digital image correlation
  27. Superplastic failure mode in ultrafine grained magnesium alloy AZ31
  28. High temperature magnetic strengthening in iron-based alloys: Magnetic effects on deformation and fracture, revisited
  29. Notification
  30. DGM News
https://doi.org/10.3139/146.090401

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Prof. Dr. Günter Gottstein
  5. Feature
  6. Interface Migration in Metals (IMM):“Vingt Ans Après” (Twenty Years Later)
  7. Basic
  8. On the solute-defect interaction in the framework of a defactant concept
  9. A new model of dynamic recovery for Stage III of pure fcc metals without cross slip
  10. Sequence of distinct microyielding stages of the monocrystalline nickel-base superalloy CMSX-6 at high temperatures
  11. Comparison of texture evolution in fcc metals predicted by various grain cluster homogenization schemes
  12. Recrystallization initiated by low-temperature grain boundary motion coupled to stress
  13. Sub-grain boundary mobilities during recovery of binary Al–Mn alloys
  14. Concentration phase transition associated with grain boundary segregation in systems with restricted solubility
  15. Second-order faceting–roughening of the tilt grain boundary in zinc
  16. A model of grain boundary diffusion in polycrystals with evolving microstructure
  17. Linear measures for polyhedral networks
  18. Testing a curvature driven moving finite element grain growth model with the generalized three dimensional von Neumann relation
  19. Grain-boundary source/sink behavior for point defects: An atomistic simulation study
  20. Applied
  21. Deformation modes and anisotropy in magnesium alloy AZ31
  22. Control of recrystallisation texture and texture-related properties in industrial production of aluminium sheet
  23. The combined effect of static recrystallization and twinning on texture in magnesium alloys AM30 and AZ31
  24. Comparison of damage development depending on the local microstructure in low alloyed Al-TRIP-steels, IF steel and a DP steel
  25. Nanoindentation of Ti50Ni48Fe2 and Ti50Ni40Cu10 shape memory alloys
  26. Early detection of crack initiation sites in TiAl alloys during low-cycle fatigue at high temperatures utilizing digital image correlation
  27. Superplastic failure mode in ultrafine grained magnesium alloy AZ31
  28. High temperature magnetic strengthening in iron-based alloys: Magnetic effects on deformation and fracture, revisited
  29. Notification
  30. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 16.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.090401/pdf
Scroll to top button