Seikei-Kakou abstracts

Articles in the same Issue

1. Contents
2. Review article
3. Control Strategies for Reactive Extrusion of Polypropylene by Peroxide Degradation A Brief Review and an Experimental Study
4. Regular Contributed Articles
5. Morphology and Tensile Properties as a Function of Welding Current in Thermoplastic Induction Welds
6. Numerical Simulation of Fluid Flow and Mixing Dynamics inside Planetary Roller Extruders
7. Synergistic Flame-Retardant Effect of Aluminum Diethyl Phosphinate in PP/IFR System and the Flame-Retardant Mechanism
8. Predicting the Non-Linear Conveying Behavior in Single-Screw Extrusion: A Comparison of Various Data-Based Modeling Approaches used with CFD Simulations
9. Influence of Crystal Structure on Thermo-Mechanical Properties of Injection Molded 𝛃-Nucleated iPP
10. An Experimental Study on the Properties of Recycled High-Density Polyethylene
11. Improvement of Mechanical and Biological Properties of PLA/HNT Scaffolds Fabricated by Foam Injection Molding: Skin Layer Effect and Laser Texturing
12. Relationship between Molecular Orientation Relaxation during Physical Aging and Heat Resistance of Polystyrene Injection Moldings
13. Recycling of Bagasse as an Agricultural Waste and its Effect as Filler on Some Mechanical and Physical Properties of SBR Composites
14. Use of Image Analysis for Non-Destructive Testing of Thermoformed Food Packages
15. Process Influences in the Combined Compacting and Back-Injection Process to Produce Back-Injected Self-Reinforced Composites (SRCs) – Analysis via Multiple Regression Modelling
16. Utilizing Pyrolytic Biomass Products for Rubber Reinforcement: Effect of the Silica Content in Biomass Feed Stocks
17. PPS News
18. Seikei-Kakou abstracts
19. PPS Membership application