Home Calendering of coated paper at high speeds and temperatures
Article
Licensed
Unlicensed Requires Authentication

Calendering of coated paper at high speeds and temperatures

  • Taina Lamminmäki , Ulla Forsström , Matti Tienari , Erkki Saharinen , Jaana Mikkilä and Jukka Koskelainen
Published/Copyright: July 19, 2018
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Nordic Pulp & Paper Research Journal
From the journal Nordic Pulp & Paper Research Journal Volume 20 Issue 3

Published Online: 2018-07-19
Published in Print: 2005-08-01

© 2018 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. Contents
  2. Application of polymeric multilayers of starch onto wood fibres to enhance strength properties of paper
  3. Z-profile of styrene acrylate and urea formaldehyde resin in foils, measured by Py-GC/MS (analytical pyrolysis – gas chromatography/mass spectrometry)
  4. Comparison of 3D structural characteristics of high and low resolution X-ray microtomographic images of paper
  5. The influence of press felt micro-scale stress variation on dewatering
  6. Recycling effects in the titanate direct causticization process
  7. The influence of surface roughness on the compressive behaviour of paper
  8. Pinch analysis of a model mill: Economic and environmental gains from thermal processintegration in a state-of-the-art magazine paper mill
  9. Segmentation of individual pores in 3D paper images
  10. Refining systems for sack paper pulp: Part I HC refining under pressurised conditions and subsuequent LC refining
  11. Development of a 3-stage bleaching sequence for magnesium sulphite pulp to full ISO brightness meeting high environmental demands
  12. The influence of pigment size distribution and morphology on coating binder migration
  13. Observations on interfibre bonding and fibre segment activation based on the strength properties of laboratory sheets
  14. Flow resistance of wet and dry sheets used for preparation of liquid packaging board
  15. Calendering of coated paper at high speeds and temperatures
https://doi.org/10.3183/npprj-2005-20-03-p354-360
Keywords for this article
Coating; Calendering; Temperature; Viscoelastic; Latex; Gloss; Porosity; Coating structure

Articles in the same Issue

  1. Contents
  2. Application of polymeric multilayers of starch onto wood fibres to enhance strength properties of paper
  3. Z-profile of styrene acrylate and urea formaldehyde resin in foils, measured by Py-GC/MS (analytical pyrolysis – gas chromatography/mass spectrometry)
  4. Comparison of 3D structural characteristics of high and low resolution X-ray microtomographic images of paper
  5. The influence of press felt micro-scale stress variation on dewatering
  6. Recycling effects in the titanate direct causticization process
  7. The influence of surface roughness on the compressive behaviour of paper
  8. Pinch analysis of a model mill: Economic and environmental gains from thermal processintegration in a state-of-the-art magazine paper mill
  9. Segmentation of individual pores in 3D paper images
  10. Refining systems for sack paper pulp: Part I HC refining under pressurised conditions and subsuequent LC refining
  11. Development of a 3-stage bleaching sequence for magnesium sulphite pulp to full ISO brightness meeting high environmental demands
  12. The influence of pigment size distribution and morphology on coating binder migration
  13. Observations on interfibre bonding and fibre segment activation based on the strength properties of laboratory sheets
  14. Flow resistance of wet and dry sheets used for preparation of liquid packaging board
  15. Calendering of coated paper at high speeds and temperatures
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 25.10.2025 from https://www.degruyterbrill.com/document/doi/10.3183/npprj-2005-20-03-p354-360/html
Scroll to top button