On the Hot Workability of ELI Grade Titanium Alloy Ti–6Al–4V
-
S. V. S. Narayana Murty
and
B. P. Kashyap
Abstract
Using the test data of extra low interstitial (ELI) grade titanium alloy Ti–6Al– 4V (wt.%) with microstructural observations, studies are made to examine the flow localization concepts as well as the simplified metallurgical stability criterion for delineating the regions of flow instabilities in the processing maps. The optimum hot working conditions for the material are suggested.
References
1 Boyer, R.; Welsch, G.; Collings, E.W. (eds.): Materials Properties Handbook: Titanium Alloys, ASM International, Materials Park, OH (1994) 488.Search in Google Scholar
2 Seshacharyulu, T.; Medeiros, S.C.; Morgan, J.T.; Malas, J.C.; Frazier, W.G.; Prasad, Y.V.R.K.: Mater. Sci. Eng. A 279 (2000) 289.10.1016/S0921-5093(99)00173-2Search in Google Scholar
3 Semiatin, S.L.; Lahoti, G.D.: Metall. Trans. A 13 (1982) 275.10.1007/BF02643318Search in Google Scholar
4 Dieter, G.E., in: Metals Handbook, Ninth Edition, Vol. 14, American Society for Metals, Metals Park, OH (1988) 363.Search in Google Scholar
5 Semiatin, S.L.; Jonas, J.J.: Formability and Workability of Metals: Plastic Instability and Flow Localization, American Society for Metals, Metals Park, OH (1984) 69.Search in Google Scholar
6 Narayana Murty, S.V.S.; Nageswara Rao, B.; Kashyap, B.P.: Z. Metallkd. 91 (2000) 769.Search in Google Scholar
7 Ziegler, H.: Progress in Solid Mechanics, John Wiley and Sons, New York 4 (1963) 93.Search in Google Scholar
© 2001 Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Aufsätze/Articles
- Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals
- Influences of Material Inhomogeneities in 100Cr6 Steel on the Electrochemical Metal Dissolution Process
- An Investigation on Cold Roll Welding of Copper to Aluminum Using Electrical Resistivity
- Effect of Forced Convection by Accelerating Crucible Rotation on Directional Solidification
- Phase Transformation Behaviour and Microstructure of Ti51Pd30Ni19 Alloy
- Experimental Study and Reassessment of the Ni–Hf Binary System
- AThermodynamic Assessment of the Pr–Al System
- Phase Diagram and Thermodynamic Properties of the Tl – In – Te System
- The Excess Enthalpies of Liquid In–Bi–Te and Sb–Bi–Te Alloys
- Thermodynamic Evaluation of Binary Phase Diagrams of Small Particle Systems
- On the Hot Workability of ELI Grade Titanium Alloy Ti–6Al–4V
- Revelation of Anomalous Creep of the Cu–30 mass% Zn Alloy Related with Dislocation Hardening under High-Temperature Creep Deformation
- Formation of Nanocrystalline Phases during Decomposition of Amorphous Ni–P Alloys by Continuous Linear Heating
- Lattice Parameters of Metastable Structures in Quenched Fe-Mn Alloys. Part II: hcp Phase
- Einfluss dynamischer Reckalterung auf Lebensdauer und Mikrostruktur bei zyklischer Beanspruchung von X22CrMoV121
- Development of SMD 32.768 kHz Tuning Fork-Type Crystals Using Photolithography and Selective Etching Process
- Mitteilungen/Notifications
- Personen
- Mitteilungen
- Bücher
- Tagungen
Articles in the same Issue
- Contents
- Aufsätze/Articles
- Electron Back Scatter Diffraction and Synchrotron X-Ray Peak Profile Analysis as Tools for Microstructural Characterization of Large Strain Work Hardened Metals
- Influences of Material Inhomogeneities in 100Cr6 Steel on the Electrochemical Metal Dissolution Process
- An Investigation on Cold Roll Welding of Copper to Aluminum Using Electrical Resistivity
- Effect of Forced Convection by Accelerating Crucible Rotation on Directional Solidification
- Phase Transformation Behaviour and Microstructure of Ti51Pd30Ni19 Alloy
- Experimental Study and Reassessment of the Ni–Hf Binary System
- AThermodynamic Assessment of the Pr–Al System
- Phase Diagram and Thermodynamic Properties of the Tl – In – Te System
- The Excess Enthalpies of Liquid In–Bi–Te and Sb–Bi–Te Alloys
- Thermodynamic Evaluation of Binary Phase Diagrams of Small Particle Systems
- On the Hot Workability of ELI Grade Titanium Alloy Ti–6Al–4V
- Revelation of Anomalous Creep of the Cu–30 mass% Zn Alloy Related with Dislocation Hardening under High-Temperature Creep Deformation
- Formation of Nanocrystalline Phases during Decomposition of Amorphous Ni–P Alloys by Continuous Linear Heating
- Lattice Parameters of Metastable Structures in Quenched Fe-Mn Alloys. Part II: hcp Phase
- Einfluss dynamischer Reckalterung auf Lebensdauer und Mikrostruktur bei zyklischer Beanspruchung von X22CrMoV121
- Development of SMD 32.768 kHz Tuning Fork-Type Crystals Using Photolithography and Selective Etching Process
- Mitteilungen/Notifications
- Personen
- Mitteilungen
- Bücher
- Tagungen
