Fortbildung

Articles in the same Issue

1. Frontmatter
2. Aufsätze
3. Segregation and Precipitation during Solidification of Titanium and Nitrogen Containing Iron Alloys
4. Microtexture and Orientation Relations Analysis in Surroundings of Shear Bands in Monocrystalline Copper
5. Correlation Between Microstructure and Creep Behavior of the High-Temperature Ti Alloy IMI 834
6. The Influence of Cold Working and Recrystallization on the Homogenization of As-cast Cu-50 wt.% Ni Alloy
7. Casting of Particulate Al-base Composites
8. Creep Crack Growth and Fractal Dimension of the Grain-boundary Fracture in Austenitic 21Cr–4Ni–9Mn Steel
9. The Energy Release Rate of Nonlinear Double Cantilever Beam Specimens
10. Thermodynamic Properties of Solid Aluminium– Iron Alloys
11. An Assessment of Thermodynamic Equilibria in the Ag–Al–Cu–Mg Quaternary System in Relation to Precipitation Reactions
12. Experimental Study of Phase Equilibria in the Fe–Cr –Mn System in the Temperature Range 1073 to 1373 K
13. Thermodynamic Properties and Phase Equilibria in the Ca–Sb System
14. Phase Equilibria in the Ti-rich Corner of the Ti –Si –Al System
15. Mitteilungen der Deutschen Gesellschaft für Materialkunde e.V.
16. Personen
17. Fortbildung
18. Terminkalender