Third in a Series: Pioneers of Polymer Processing Charles Hancock — The First Thermoplastics Processing Innovator

Articles in the same Issue

1. Contents
2. Contents
3. Editorial
4. Third in a Series: Pioneers of Polymer Processing Charles Hancock — The First Thermoplastics Processing Innovator
5. Internal Mixers
6. Finite Element Analysis of Mixing in Partially Filled Twin Blade Internal Mixers
7. Screw Extrusion
8. Use of Dye Containing Polymeric Microcapsules for Determining Shear Stresses
9. Modeling Flow and Fusion of Mixtures/Blends of Polymer Pellets and a Low Viscosity Phase in a Modular Co-rotating Twin Screw Extruder
10. Fiber and Film
11. Development of High Quality LLDPE and Optimised Processing for Film Blowing
12. Molding
13. Impregnating Flow of a Rheokinetic Liquid
14. Morphology of Injection Molded Polyacetal during Filling
15. Crystal Orientation in Injection Moldings of Talc-filled Polyolefins
16. Structure and Properties of Injection Moldings of β-Crystal Nucleator-added PP
17. Thermal Effects in the Numerical Simulation of the Thermoforming of Multilayered Polymer Sheets
18. Measurement and Prediction of Anisotropy in Injection Moulded PP Products
19. Rapid Communication
20. Gas Penetrations in Symmetrical Tapping Ribs during Gas-Assisted Injection Molding