Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Dedication In Memorial to Konathala Himasekhar (1957–1995)

Published/Copyright: June 4, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 12 Issue 3

Published Online: 2013-06-04
Published in Print: 1997-09-01

© 1997, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Dedication In Memorial to Konathala Himasekhar (1957–1995)
  5. Regular Contributed Articles
  6. Towards a 3-D Finite Element Model for the Gas-Assisted Injection Moulding Process
  7. Numerical Simulation of the Multi-Component Injection Moulding Process
  8. Shrinkage Prediction for Slowly-Crystallizing Thermoplastic Polymers in Injection Molding
  9. The Optimized Quasi-Planar Approximation for Predicting Fiber Orientation in Injection-Molded Composites1
  10. Modelling the PVT Behavior of Isotactic Polypropylene
  11. Extension of 2½ D Control Volume Methods for Transverse Flow at Sprues, Gates and Junctions
  12. Numerical Modelling of the Mould Filling Stage in Gas-Assisted Injection Moulding
  13. Modular Tangential Counter-Rotating Twin Screw Extrusion: Non-Newtonian and Non-Isothermal Simulation
  14. A Parametric Study of Sink Marks in Injection-Molded Plastic Parts using the Finite Element Method
https://doi.org/10.3139/217.970206

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Dedication In Memorial to Konathala Himasekhar (1957–1995)
  5. Regular Contributed Articles
  6. Towards a 3-D Finite Element Model for the Gas-Assisted Injection Moulding Process
  7. Numerical Simulation of the Multi-Component Injection Moulding Process
  8. Shrinkage Prediction for Slowly-Crystallizing Thermoplastic Polymers in Injection Molding
  9. The Optimized Quasi-Planar Approximation for Predicting Fiber Orientation in Injection-Molded Composites1
  10. Modelling the PVT Behavior of Isotactic Polypropylene
  11. Extension of 2½ D Control Volume Methods for Transverse Flow at Sprues, Gates and Junctions
  12. Numerical Modelling of the Mould Filling Stage in Gas-Assisted Injection Moulding
  13. Modular Tangential Counter-Rotating Twin Screw Extrusion: Non-Newtonian and Non-Isothermal Simulation
  14. A Parametric Study of Sink Marks in Injection-Molded Plastic Parts using the Finite Element Method
Downloaded on 18.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.970206/html
Scroll to top button