Home Modeling and Experimental Study of the Flow in a Simplified Cavity Transfer Mixer
Article
Licensed
Unlicensed Requires Authentication

Modeling and Experimental Study of the Flow in a Simplified Cavity Transfer Mixer

  • C. Wang and I. Manas-Zloczower
Published/Copyright: May 28, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 11 Issue 2

Abstract

The Cavity Transfer Mixer (CTM) was primarily designed as a distributive mixing device to be used as an add-on unit to existing extruders. Understanding the flow patterns and characteristics within the CTM is of fundamental importance for a proper design and optimum processing. Due to the complex geometry and the transient characteristics of the flow, solving for the flow patterns in the CTM is not an easy task. However, some of the design features of the CTM can be reproduced in a simplified device which will allow more detailed experimental and numerical investigation. In this work such a simplified device was built and used to reveal some of the features of the flow patterns and the influence of one design parameter (cavity shallowness) on the dispersive mixing efficiency.

* Mail address: Prof. I. Manas-Zloczower, Department of Macro-molecular Science, Case Western Reserve University Cleveland, Ohio 44106, U.S.A.
Received: 1994-3-16
Accepted: 1995-11-3
Published Online: 2013-05-28
Published in Print: 1996-05-01

© 1996, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Eighteenth in a Series: Toshiba Machine
  5. Screw Extrusion
  6. Theoretical and Experimental Investigations of the Melting of Pellets in Co-Rotating Twin-Screw Extruders
  7. An Improved Flow Simulation Model for a Tangential Counter-Rotating Twin Screw Extruder
  8. Modeling and Experimental Study of the Flow in a Simplified Cavity Transfer Mixer
  9. An Analytical Model of the Conveying Behaviour of Closely Intermeshing Co-rotating Twin Screw Extruders
  10. Reactive Processing
  11. Simulation of Continuous Polymerization in a Modular Intermeshing Co-rotating Twin Screw Extruder
  12. Reactive Blending in a Twin Screw Extruder
  13. Die Extrusion
  14. Viscoelastic Simulations of Stratified Bicomponent Extrusion through Slit Dies
  15. Fibers
  16. Spinnability of Polymer Melts – a Complex Problem in Basic Research1)
  17. Molding
  18. Structure and Properties of Inflation Films of β-Phase Nucleating Agent-Added Polypropylene
  19. Inverse Modeling of Injection Molding Thermal Stresses to Optimize Temperature and Pressure History
  20. An Assessment of Thermal Stresses in Injection Moulded ABS Copolymer
  21. Rapid Communications
  22. Experimental Study on the Injection Compression Molding of Parts with Precision Contours
https://doi.org/10.3139/217.960115

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Eighteenth in a Series: Toshiba Machine
  5. Screw Extrusion
  6. Theoretical and Experimental Investigations of the Melting of Pellets in Co-Rotating Twin-Screw Extruders
  7. An Improved Flow Simulation Model for a Tangential Counter-Rotating Twin Screw Extruder
  8. Modeling and Experimental Study of the Flow in a Simplified Cavity Transfer Mixer
  9. An Analytical Model of the Conveying Behaviour of Closely Intermeshing Co-rotating Twin Screw Extruders
  10. Reactive Processing
  11. Simulation of Continuous Polymerization in a Modular Intermeshing Co-rotating Twin Screw Extruder
  12. Reactive Blending in a Twin Screw Extruder
  13. Die Extrusion
  14. Viscoelastic Simulations of Stratified Bicomponent Extrusion through Slit Dies
  15. Fibers
  16. Spinnability of Polymer Melts – a Complex Problem in Basic Research1)
  17. Molding
  18. Structure and Properties of Inflation Films of β-Phase Nucleating Agent-Added Polypropylene
  19. Inverse Modeling of Injection Molding Thermal Stresses to Optimize Temperature and Pressure History
  20. An Assessment of Thermal Stresses in Injection Moulded ABS Copolymer
  21. Rapid Communications
  22. Experimental Study on the Injection Compression Molding of Parts with Precision Contours
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 6.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.960115/pdf?lang=en
Scroll to top button