Article
Licensed
Unlicensed
Requires Authentication
Effect of Biaxial Stretching on Mechanical Properties and Surface Roughness of PMMA Films
-
Y. D. Wang
Published/Copyright:
May 27, 2013
Abstract
Recently the use of PMMA films as the top layer of dish membrane solar collectors has gathered popularity. The mechanical properties and surface smoothness of PMMA films are the important factors affecting the durability and optical performance of these stretched membrane solar collectors. In this paper, we present the results of our experimental study on the effect of biaxial stretching on mechanical properties and surface roughness of PMMA films. Biaxial stretching was found to improve both the mechanical properties and surface smoothness of PMMA films.
Received: 1992-5-12
Accepted: 1992-11-9
Published Online: 2013-05-27
Published in Print: 1993-05-01
© 1993, Carl Hanser Verlag, Munich
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Contents
- Internal Mixers
- Estimation of Quality of Mixing
- Screw Extrusion and Continuous Mixing
- An In-line Rheometer for Molten Plastics
- Melting of Plastics in Kneading Blocks
- Development of Phase Morphology of a Polyethylene-Polyamide 6-Blend in a Modular Co-rotating Twin Screw Extruder
- Microstructure Formation in Extruded and Drawn Polyblends of PC with a Thermotropic LCP
- Die Extrusion
- A Slip Model for Linear Polymers Based on Adhesive Failure
- Film
- Effect of Biaxial Stretching on Mechanical Properties and Surface Roughness of PMMA Films
- Molding
- Dynamics and Control of Surface and Mold Temperatures in Injection Molding
- A Study on Flexural Properties of Sandwich Injection Moldings
- Detailed Investigations of Structural Layering Phenomena in Injection Molded Thermotropic LCP
- Computer Controlled Rotational Molding of Liquid Silicone Polymer
Articles in the same Issue
- Contents
- Contents
- Internal Mixers
- Estimation of Quality of Mixing
- Screw Extrusion and Continuous Mixing
- An In-line Rheometer for Molten Plastics
- Melting of Plastics in Kneading Blocks
- Development of Phase Morphology of a Polyethylene-Polyamide 6-Blend in a Modular Co-rotating Twin Screw Extruder
- Microstructure Formation in Extruded and Drawn Polyblends of PC with a Thermotropic LCP
- Die Extrusion
- A Slip Model for Linear Polymers Based on Adhesive Failure
- Film
- Effect of Biaxial Stretching on Mechanical Properties and Surface Roughness of PMMA Films
- Molding
- Dynamics and Control of Surface and Mold Temperatures in Injection Molding
- A Study on Flexural Properties of Sandwich Injection Moldings
- Detailed Investigations of Structural Layering Phenomena in Injection Molded Thermotropic LCP
- Computer Controlled Rotational Molding of Liquid Silicone Polymer
