Article
Licensed
Unlicensed
Requires Authentication
New and Unconventional Methods for Recycling Mixed Plastic Scrap
-
G. Menges
Published/Copyright:
May 27, 2013
Abstract
Waste from polymer materials – no matter whether filled or unfilled, extremely impure or mixed – can be divided more or less into their molecular components by chemical means.
Received: 1992-2-24
Accepted: 1992-5-19
Published Online: 2013-05-27
Published in Print: 1992-12-01
© 1992, Carl Hanser Verlag, Munich
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Contents
- Invited Paper
- New and Unconventional Methods for Recycling Mixed Plastic Scrap
- Internal Mixers
- Simulating Polymer Mixing Processes Using the Boundary Element Method
- Extrusion
- Experimental Study of High Reynolds' Number Flows Between Narrow Gaps
- Analysis of an Alternative Extruder Screw Pump Design
- Film
- Effect of Biaxial Stretching on Thickness Uniformity and Surface Roughness of PET and PPS Films
- Isothermal and Anisothermal Models for Cast Film Extrusion
- Molding
- Crystalline Orientation in Injection Molded Polyethylene Parts
- Structures and Properties of Injection Moldings of Flaky Filler-filled Polypropylenes
Articles in the same Issue
- Contents
- Contents
- Invited Paper
- New and Unconventional Methods for Recycling Mixed Plastic Scrap
- Internal Mixers
- Simulating Polymer Mixing Processes Using the Boundary Element Method
- Extrusion
- Experimental Study of High Reynolds' Number Flows Between Narrow Gaps
- Analysis of an Alternative Extruder Screw Pump Design
- Film
- Effect of Biaxial Stretching on Thickness Uniformity and Surface Roughness of PET and PPS Films
- Isothermal and Anisothermal Models for Cast Film Extrusion
- Molding
- Crystalline Orientation in Injection Molded Polyethylene Parts
- Structures and Properties of Injection Moldings of Flaky Filler-filled Polypropylenes
