Home Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
Article Open Access

Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts

  • L.-X. Wang , D.-F. Wang , L. Jiang , N. Bian , Q. Li and C.-Y. Shen
Published/Copyright: June 19, 2019
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 34 Issue 3

Received: 2018-10-23
Accepted: 2019-02-10
Published Online: 2019-06-19
Published in Print: 2019-07-03

© 2019, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Synthesis of a Novel Ladder Poly(azomethine-ester) Based on PET Waste Bottles
  5. Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures
  6. Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile
  7. Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
  8. On Induced Properties and Self Heating during Free Blowing of PET Preform
  9. Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer
  10. Micro-Residual Stress Measurement in Nanocomposite Reinforced Polymers
  11. Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
  12. Preparation and Characterization of Hydrophobic Flat Sheet Membranes Based on a Recycled Polymer
  13. PPS News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.3776
Creative Commons
BY 4.0

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Synthesis of a Novel Ladder Poly(azomethine-ester) Based on PET Waste Bottles
  5. Identifying Melt Processing Conditions for a Polyacrylonitrile Copolymer Plasticized with Water, Acetonitrile and their Mixtures
  6. Optimization of Injection Stretch Blow Molding: Part I – Defining Part Thickness Profile
  7. Damping, Thermal and Mechanical Analyses of Polycarbonate/Cerium Oxide Composites for Structural Applications
  8. On Induced Properties and Self Heating during Free Blowing of PET Preform
  9. Study of Rheology and Plug Assist Thermoforming of Linear and Branched PP Homopolymer and Impact Copolymer
  10. Micro-Residual Stress Measurement in Nanocomposite Reinforced Polymers
  11. Influence of Process Parameters on the Morphologies of Micro-Injection Molded Polyformaldehyde Parts
  12. Preparation and Characterization of Hydrophobic Flat Sheet Membranes Based on a Recycled Polymer
  13. PPS News
  14. PPS News
  15. Seikei Kakou Abstracts
  16. Seikei-Kakou Abstracts
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 26.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.3776/html?lang=en
Scroll to top button