Analysis of a Single-Screw Extruder with a Grooved Plasticizing Barrel – Experimental Investigation

Articles in the same Issue

1. Contents
2. Contents
3. Regular Contributed Articles
4. Research on Influencing Factors of the Thermal Contact Resistance in Thin-Wall Injection Molding
5. Kinetic Analysis on Thermal Decomposition of Poly(lactic acid) Toughened by Calcium Sulfate Whiskers
6. Fabrication of Double-Sided Micro-Lens Array Using UV Injection Molding
7. UV Pre-Treatment for Polycarbonate for Bonding LSR in a Multi-Component Injection Molding Process
8. Simulations of Heat Transfer in Thermoplastic Injection Molds Manufactured by Additive Techniques
9. Cyclic Extrusion of Recycled High Density Polyethylene/Banana Fiber/Fly Ash Cenosphere Biocomposites: Thermal and Mechanical Retention Properties
10. Effects of Zinc Borate on the Flame Retardancy Performance of Aluminum Diethylphosphinate in Polyamide-6 and its Composites
11. Theoretical and Experimental Studies on Tribological Behavior of Luffa Fiber Reinforced Polyester under the Influence of Surface Treatment
12. Global Modeling of Single Screw Extrusion with Slip Effects
13. A Closer Look at the Bonding Capacity of Thick Metal-Plastic Hybrids
14. Thermomechanical Degradation of Polyetherimide (PEI) by Friction-Based Joining and the Effects on Quasi-Static Mechanical Strength of Hybrid Joints
15. Thermal, Tensile, Electrical, Dynamic Mechanical Thermal and Rheological Properties of Polyvinylidene Fluoride and Fluoroelastomer Composites Filled with Carbon Black
16. Effect of Zinc Borate on Enhancing Flame Retardancy of Electron Beam Irradiated Alumina Trihydrate (ATH)/Acrylonitrile Butadiene Styrene (ABS) Composites
17. Could Alfa Fibers Substitute Glass Fibers in Composite Materials?
18. Analysis of a Single-Screw Extruder with a Grooved Plasticizing Barrel – Experimental Investigation
19. PPS News
20. PPS News
21. Seikei Kakou Abstracts
22. Seikei-Kakou Abstracts