Evaluation of Thermo-Mechanical and Wear Behavior of Short Carbon Fibre Vinyl-Ester Filled Homogenous and Their Functionally Graded Composites

References

Agarwal, B. D., Broutman, L. J.: Analysis and Performance of Fibre Composites, 2^nd Edition, John Wiley and Sons, New York (1990)Search in Google Scholar

Akay, M., “Aspects of Dynamic Mechanical Analysis in Polymeric Composite”, Compos. Sci. Technol., 47, 419–423 (1993) 10.1016/0266-3538(93)90010-ESearch in Google Scholar

Basavarajappa, S., et al., “Studies on Dry Sliding Wear Behavior of Graphite Filled Glass-epoxy Composites”, Mater. Des., 30, 2670–2675 (2009) 10.1016/j.matdes.2008.10.013Search in Google Scholar

Butcher, R. J., et al., “A Functionally Graded Particulate Composite: Preparation: Measurements and Failure Analysis”, Acta Mater., 47, 259–268 (1999) 10.1016/S1359-6454(98)00305-XSearch in Google Scholar

Chand, N., et al., “Development and Tribological Behavior of UHMWPE Filled Epoxy Gradient Composites”, Wear, 262, 184–190 (2007) 10.1016/j.wear.2006.04.012Search in Google Scholar

Chand, N., Sharma, M. K., “Development and Sliding Wear Behavior of Milled Carbon Fibre Reinforced Epoxy Gradient Composite”, Wear, 264, 69–74 (2008) 10.1016/j.wear.2007.01.043Search in Google Scholar

Chung, H., Das, S., “Processing and Properties of Glass Bead Particulate-filled Functionally Graded Nylon-11 Composites Produced by Selective Laser Sintering”, Mater. Sci. Eng. A, 437, 226–234 (2006) 10.1016/j.msea.2006.07.112Search in Google Scholar

Davim, J. P., Cardoso, R., “Effect of the Reinforcement (Carbon or Glass) on Friction and Wear Behavior of the PEEK against Steel Surface at Long Dry Sliding”, Wear, 266, 795–799 (2009) 10.1016/j.wear.2008.11.003Search in Google Scholar

Davim, J. P., et al., “Effect of Carbon fibre Reinforcement in the Frictional Behavior of PEEK in Water Lubrificated Environment”, Wear, 251, 1100–1104 (2001) 10.1016/S0043-1648(01)00741-4Search in Google Scholar

Desilles, N., et al., “Gradient Structure Materials from Homogeneous System Induced by UV Photopolymerization”, Polymer, 44, 6159–6167 (2003) 10.1016/S0032-3861(03)00664-5Search in Google Scholar

Dong, S., Gauvin, R., “Application of Dynamic Mechanical Analysis for the Study of the Interfacial Region in Carbon Fibre/Epoxy Composite Materials”, Polym. Compos., 14, 414–420 (1993) 10.1002/pc.750140508Search in Google Scholar

Friedrich, K., et al., “Recent Advances in Polymer Composites Tribology”, Wear, 190, 139–144 (1995) 10.1016/0043-1648(96)80012-3Search in Google Scholar

Friedrich, K, et al., “Experimental and Numerical Evaluation of the Mechanical Properties of Compacted Wear Debris Layers Formed between Composites and Steel Surfaces in Sliding Contact”, Wear, 250–251, 1202–1212 (2001) 10.1016/S0043-1648(01)00725-6Search in Google Scholar

Friedrich, K., et al.: Polymer Composites from Nano- to Macro-scale, Springer, New York (2005)Search in Google Scholar

Funabashi, M., “Gradient Composites of Nickel Coated Carbon Fibre Filled Epoxy Resin Moulded Under Centrifugal Force”, Composites Part A, 28, 731–737 (1997) 10.1016/S1359-835X(97)00016-XSearch in Google Scholar

Gangil, B., et al., “Investigations on Mechanical and Sliding Wear Behavior of Short Fibre-reinforced Vinylester-based Homogenous and their Functionally Graded Composites“, J. Mater. Des. Appl., 216, 300–315 (2012) 10.1177/1464420712450956Search in Google Scholar

Glen, S. P.: Taguchi Methods: A Hand on Approach, Addison-Wesley, New York (1993)Search in Google Scholar

Hagstrand, P. O., et al., “The Influence of Void Content on the Structural Flexural Performance of Unidirectional Glass Fibre Reinforced Polypropylene Composites”, Composites Part A, 36, 705–14 (2005) 10.1016/j.compositesa.2004.03.007Search in Google Scholar

Hashim, S. A. R., Dwivedi, U. K., “Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites”, J. Polym. Res., 14, 75–81 (2007) 10.1007/s10965-006-9083-5Search in Google Scholar

Iwasaki, Y., et al., “The Effect of the Chemical Structure of the Phospholipid Polymer on Fibronectin Adsorption and Fibroblast Adhesion on the Gradient Phospholipid Surface”, Biomaterials, 20, 2185–2191 (1999) 10.1016/S0142-9612(99)00123-4Search in Google Scholar

Jepson, L., et al., “SLS Processing of Functionally Graded Materials, Solid Freeform Fabrication Proceedings, Austin, 67–80 (1997)Search in Google Scholar

Jincheng, X., et al., “Effects of Some Factors on the Tribological Properties of the Short Carbon Fiber-reinforced Copper Composite”, Mater. Des., 25, 489–493 (2004) 10.1016/j.matdes.2004.01.011Search in Google Scholar

Joseph, P. V., et al., “Dynamic Mechanical Properties of Short Sisal Fibre Reinforced Polypropylene Composites” Composites Part A, 34, 275–290 (2003) 10.1016/S1359-835X(02)00020-9Search in Google Scholar

Klingshrin, C., et al., “Structure and Wear of Centrifuged Epoxy-Resin/Carbon Fibre Functionally Graded Materials”, J. Mater. Sci. Lett., 19, 263–266 (2009) 10.1023/A:1006783330100Search in Google Scholar

Krumova, M., et al., “Microhardness Studies on Functionally Graded Polymer Composites”, Compos. Sci. Technol., 61, 557–563 (2001) 10.1016/S0266-3538(00)00228-1Search in Google Scholar

Kumar, S., et al., “Thermo-mechanical Correlations to Erosion Performance of Short Carbon Fibre Reinforced Vinyl Ester Resin Composites”, Mater. Des., 32, 2260–2268 (2011) 10.1016/j.matdes.2010.11.019Search in Google Scholar

Lee, H. G., et al., “Effect of Compacted Wear Debris on the Tribological Behavior of Carbon/Epoxy Composites”, Compos. Struct., 74, 136–144 (2006) 10.1016/j.compstruct.2005.03.014Search in Google Scholar

Lee, J. H., et al., “The Effect of Fluid Shear Stress on Endothelial Cell Adhesiveness to Polymer Surfaces with Wettability Gradient”, J. Coll. Interf. Sci., 230, 84–90 (2000) 10.1006/jcis.2000.7080, PMid:10998291Search in Google Scholar

Lee, N. J., et al., “Characterization of Functionally Gradient Epoxy/Carbon Fibre Composite Prepared under Centrifugal Force”, J. Mater. Sci., 32, 2013–2020 (1997) 10.1023/A:1018502201000Search in Google Scholar

Li, H., et al., “Experimental Investigation of the Quasi-Static Fracture of Functionally Graded Materials”, Int. J. Solids Struct., 37, 3715–3732 (2000) 10.1016/S0020-7683(99)00056-6Search in Google Scholar

Naganuma, T., Naito, K., “Influence of Prepare Conditions on the Void Occurrence and Tensile Properties of Woven Glass Fibre-reinforced Polyimide Composites”, Compos. Sci. Technol., 69, 2428–2433 (2009) 10.1016/j.compscitech.2009.06.012Search in Google Scholar

Patnaik, A., et al., “A Comparative Study on Different Ceramic Fillers Affecting Mechanical Properties of Glass Polyester Composites”, J. Reinf. Plast. Compos., 28, 1305–1318 (2009) 10.1177/0731684407086589Search in Google Scholar

Pul, S., et al., “Functionally graded WC-Co Materials Produced by Electrophorectic Deposition”, Scripta Materialia, 45, 1139–1145 (2001) 10.1016/S1359-6462(01)01126-5Search in Google Scholar

Kumar, S., et al., “Thermo-mechanical correlations to Erosion Performance of Short Carbon Fibre Reinforced Vinyl Ester Resin Composites”, Mater. Des., 32, 2260–2268 (2011)Search in Google Scholar

Siddhartha et al., “A Study on Modified Mechanical and Wear Characteristics of Epoxy-Particulate Filled Homogenous Composites and Their Functionally Graded Materials”, J. Tribol., 133, 011601–11 (2011a)10.1115/1.4002543Search in Google Scholar

Siddhartha et al., “Mechanical and Dry Sliding Wear Characterization of Epoxy-TiO₂ Particulate Filled Functionally Graded Composites Materials Using Taguchi Design of Experiment”, Mater. Des., 32, 615–627 (2011b)10.1016/j.matdes.2010.08.011Search in Google Scholar

Stachowiak, G. W., Batchelor, A. W., “Engineering Tribology”, Butterworth-Heinemann, Oxford (2001)Search in Google Scholar

Suresha, B., et al., “Investigations on Mechanical and Two-body Abrasive Wear Behavior of Glass/Carbon Fabric Reinforced Vinyl Ester Composites”, Mater. Des., 30, 2056–2060 (2009) 10.1016/j.matdes.2008.08.038Search in Google Scholar

Unal, H., et al., “Dry Sliding Wear Characteristics of Some Industrial Polymers against Steel Counterface”, Tribol. Int., 37, 727–732 (2004) 10.1016/j.triboint.2004.03.002Search in Google Scholar

Wonderly, C., et al., “Comparison of Mechanical Properties of Glass Fibre/Vinyl Ester and Carbon Fibre/Vinyle Ester Composite”, Composites Part B, 36, 417–426 (2005) 10.1016/j.compositesb.2005.01.004Search in Google Scholar

Zhang, H., et al., “Effect of Fiber Length on the Wear Resistance of Short Carbon Fiber Reinforced Epoxy Composites”, Compos. Sci. Technol., 67, 222–230 (2007) 10.1016/j.compscitech.2006.08.001Search in Google Scholar

Zhang, H., Zhang, Z., “Comparison of Short Carbon Fibre Surface Treatments on Epoxy Composites Enhancement of the Wear Resistance”, Compos. Sci. Technol., 64, 2031–2038 (2004) 10.1016/j.compscitech.2004.02.010Search in Google Scholar

Zhao, Q., Bahadur, S., “Investigation of the Transition State in the Wear of Polyphenylene Sulfide Sliding against Steel”, Tribol. Lett., 12, 23–33 (2002) 10.1023/A:1013988804642Search in Google Scholar