Article
Licensed
Unlicensed Requires Authentication

Reactive Processing of Thermoplastic Polymers: A Review of the Fundamental Aspects

This work is dedicated to Dr. Alain Michel for his retirement and in memory of Prof. Morand Lambla. Dr. Michel and Prof. Lambla were the pioneers of the development of reactive processing in France
  • , and
Published/Copyright: March 26, 2013
Become an author with De Gruyter Brill

Abstract

The review is devoted to the fundamental aspects of the reactive processing of thermoplastic polymers. First of all, some reactive processing examples, including polymer grafting (vinyl silane, maleic anhydride) and/or functionalization, bulk polymerization (urethane, lactams, acrylate, ∊-capolactone), polyester modification and new copolymers synthesis, are presented. From a fundamental point of view, the review covers the state of the art in the domains of rheology (specifically modelling of rheo-kinetics), diffusion and mixing in highly viscous reactive or non reactive media. Finally, 1, 2 and 3-D simulation of the reactive extrusion process in twin-screw extruder is reported at the end of the review.


Mail address: P. Cassagnau, Université de Lyon, Lyon 69622, France, IMP/LMPB UMR-CNRS #5223, Ingénierie des Matériaux Polymères: Laboratoire des Matériaux Polymères et Biomatériaux, F-69622 Villeurbanne. E-mail: , P. Cassagnau is the 2006 Morand Lambla Award Winner

References

1Xanthos, M.: Reactive Extrusion: Principles and Practice. Hanser Publishers, New York (1992)Search in Google Scholar

2Tzoganakis, C.: Adv. Polym. Technol. 9, p. 321 (1989)10.1002/adv.1989.060090406Search in Google Scholar

3Lambla, M.: Macromolecular Symposia, 83rd International conference on Advanced Polymer Materials, p. 37 (1994)10.1002/masy.19940830107Search in Google Scholar

4Hu, G. H., Flat, J. J., Lambla, M.: Free-Radical Grafting of Monomers onto Polymers by Reactive Extrusion: Principles And Applications, Chapter 1, in: Reactive Modifiers for Polymers, Al-Malaika, S. (Ed.), Thomson Science & Professional, London (1997)10.1007/978-94-009-1449-0_1Search in Google Scholar

5Ciardelli, F., Aglietto, M., Coltelli, M. B., Passaglia, E., Ruggeri, G., Coiai, S.: NATO Science Series, II: Mathematics, Physics and Chemistry, (Modification and Blending of Synthetic and natural Macromolecules)175, p. 47 (2004)10.1007/978-1-4020-2735-2Search in Google Scholar

6White, J. L.: Advances in Plastics Technology, APT '05 Conference Papers, p. 15, (2005)Search in Google Scholar

7Tadmor, Z., Gogos, G.: Principles of Polymer Processing. Wiley & Sons, Wiley-Interscience, New York (2006)Search in Google Scholar

8Brown, S. B.: Chap 4: A Survey of Chemical Reactions of Monomers and Polymer during Extrusion Processing, in: Reactive Extrusion: Principles and Practice, XanthosM. (Ed.) Hanser Publishers, New York (1992)Search in Google Scholar

9Xanthos, M.: Chap2: Process Analysis from Reaction Fundamentals: Examples of Polymerisation and Controlled Degradation in Extruders, in Reactive Extrusion: Principles and Practice, XanthosM. (Ed.), Hanser Publishers, New York (1992)Search in Google Scholar

10Baker, W., Scott, C., Hu, G. H. (Eds.): Reactive Polymer Blending, Hanser Publishers, Munich (2001)10.3139/9783446401747Search in Google Scholar

11Harrats, C., Thomas, S., Groeninckx, G.: Micro- and Nanostructured Multiphase Polymer Blend Systems, CRC Press LLC (2006)10.1201/9781420026542Search in Google Scholar

12Moad, G.: Pro. Polym. Sci. 24, p. 81 (1999)10.1016/S0079-6700(98)00017-3Search in Google Scholar

13US Patent 3646155 (1972) Scott, H. G., Dow Corning Ltd., Midland Silicones Ltd.Search in Google Scholar

14Scott, H. G., Humphries, J. F.: Modern. Plastics50, p. 82 (1973)Search in Google Scholar

15Thomas, B., Browrey, M., Wire, J.: 10, p. 88 (1977)10.1007/BF03282589Search in Google Scholar

16US Patent 4117195 (1978) Swarbrick, P., Green, W. J., Maillefer, C., BICC Ltd. and Maillefer SASearch in Google Scholar

17Cartasegna, S.: Rubber Chem. Technol. 59, p. 722 (1986)10.5254/1.3538230Search in Google Scholar

18Fritz, H. G.: Polym. Mat. Sci. Eng. 79, p. 92 (1998)Search in Google Scholar

19Fritz, H. G., Bolz, U., Cai, Q.: Polym. Eng. Sci. 39, p. 1087 (1999)10.1002/pen.11496Search in Google Scholar

20Fritz, H. G.: J. Macromol. Sci.-Pure and Applied Chemistry A36 p. 1683 (1999)10.1081/MA-100101620Search in Google Scholar

21Joubert, C., Choplin, L., Michel, A., Cassagnau, P.,: J. Polym. Eng.25, p. 59 (2005)10.1515/POLYENG.2005.25.1.59Search in Google Scholar

22Parent, J. S., Geramita, K., Ranganathan, S., Whitney, R. A.: J. Appl. Polym. Sci. 76, p. 1308 (2000)10.1002/(SICI)1097-4628(20000523)76:8<1308::AID-APP11>3.0.CO;2-7Search in Google Scholar

23Fukuoka, T.: Polym. Eng. Sci. 40, p. 2511 (2000)10.1002/pen.11382Search in Google Scholar

24Fukuoka, T.: Polym. Eng. Sci. 40, p. 2524 (2000)10.1002/pen.11383Search in Google Scholar

25Isac, S., George, K. E.: Plastics, Rubber and Composites30, p. 34 (2001)10.1179/146580101101541417Search in Google Scholar

26Isac, S., George, K. E.: International Journal of Polymeric Materials, 54, p. 397 (2005)10.1080/00914030590908688Search in Google Scholar

27Barzin, J., Azizi, H., Morshedian, J.: Polym. Plas. Technol. Eng. 45, p. 979 (2006)10.1080/03602550600718209Search in Google Scholar

28Dassin, S., Dumon, M., Méchin, F., Pascault, J. P.: Poly. Eng. Sci. 42, p. 1724 (2002)10.1002/pen.11066Search in Google Scholar

29Rodriguez-Fernandez, O. S., Gilbert, M.: J. Appl. Polym. Sci. 66, p. 2121 (1997)10.1002/(SICI)1097-4628(19971219)66:11<2121::AID-APP8>3.0.CO;2-JSearch in Google Scholar

30Kowalski, R. C.: Fit the Reactor to the Chemistry, in: Reactive Extrusion: Principles and Practice, Xanthos, M. (Ed.), Hanser Publishers, New York (1992)Search in Google Scholar

31Hu, G. H., Flat, J. J., Lambla, M.: Macromol. Chem. Macromol. Symp. 75 p. 137 (1993)10.1002/masy.19930750113Search in Google Scholar

32Cartier, H., Hu, G. H.: J. Appl. Polym. Sci. 36, p. 1053 (1996)10.1002/(SICI)1099-0518(199805)36:7<1053::AID-POLA3>3.0.CO;2-3Search in Google Scholar

33Li, Y., Xie, X. M., Guo, B. H.: Polymer42, p. 3419 (2001)10.1016/S0032-3861(00)00767-9Search in Google Scholar

34Xie, X. M., Chen, N. H., Guo, B. H., Li, S.: Polym. Int. 49, p. 1677 (2000)10.1002/1097-0126(200012)49:12<1677::AID-PI590>3.0.CO;2-0Search in Google Scholar

35AlMalaika, Kong, W.: Polym. Degrad. Stab. 90, p. 197 (2005)10.1016/j.polymdegradstab.2005.03.017Search in Google Scholar

36Krause-Sammartino, L. E., Lucas, J. C., Reboredo, M. M., Aranguren, M. I.: Plast. Rubber. Comp. 35 p. 117 (2006)10.1179/174328906X103132Search in Google Scholar

37Coiai, S., Passaglia, E., Aglietto, M., Ciardelli, F.: Macromolecules37, p. 8414 (2004)10.1021/ma0400315Search in Google Scholar

38Zhu, L., Tang, G., Shi, Q., Cai, C., Yin, J.: React. Funct. Polym. 66, p. 984 (2006)10.1016/j.reactfunctpolym.2006.01.007Search in Google Scholar

39Ganzeveld, K. J., Janssen, L. P. B. M.: Polym. Eng. Sci. 32, p. 467 (1992)10.1002/pen.760320703Search in Google Scholar

40Kim, B. J., White, J. L.: Intern. Polym. Process10, p. 213 (1995)Search in Google Scholar

41Cha, J., White, J. L.: Polym. Eng. Sci. 41, p. 1227 (2001)10.1002/pen.10824Search in Google Scholar

42Ghahari, S. M., Nazokdast, H., Assempour, H.: Intern. Polym. Process. 18, p. 285 (2003)10.3139/217.1750Search in Google Scholar

43Chang, D., White, J. L.: J. Appl. Polym. Sci. 90, p. 1755 (2003)10.1002/app.12744Search in Google Scholar

44Machado, A. V., Van Duin, M., Covas, J. A.: J. Polym. Sci.,: Part A: Polym. Chem. 38, p. 3919 (2000)10.1002/1099-0518(20001101)38:21<3919::AID-POLA90>3.0.CO;2-LSearch in Google Scholar

45Van Duin, M., Machado, A. V., Covas, J.: Macromol. Symp. 170 p. 29 (2001)10.1002/1521-3900(200106)170:1<29::AID-MASY29>3.0.CO;2-4Search in Google Scholar

46Premphet, K., Chalearmthitipa, S.: Polym. Eng. Sci. 41, p. 1978 (2001)10.1002/pen.10894Search in Google Scholar

47Ciardelli, F., Aglietto, M., Ruggeri, G., Passaglia, E., Castelvetro, V.: Macromol. Symp.118, p. 311 (1997)10.1002/masy.19971180141Search in Google Scholar

48Passaglia, E., Corsi, L., Aglietto, M., Ciardelli, F., Michelotti, M., Suffredini, G.: J. Appl. Polym. Sci. 87, p. 14 (2003)10.1002/app.11658Search in Google Scholar

49Martinez, J. G., Benavides, R., Guerrero, C.: J. Appl. Polym. Sci. 102, p. 2882 (2006)10.1002/app.24730Search in Google Scholar

50Shi, D., Hu, G. H., Li, R. K. Y.: Chem. Eng. Sci. 61, p. 3780 (2006)10.1016/j.ces.2005.12.024Search in Google Scholar

51Shi, D., Li, R. K. Y., Zhu, Y., Ke, Z., Yin, J., Jiang, W., Hu, G. H.: Polym. Eng. Sci. 46, p. 1443 (2006)10.1002/pen.20610Search in Google Scholar

52Dorscht, B. M., Tzoganakis, J.: J. Appl. Polym. Sci. 87, p. 1116 (2003)10.1002/app.11561Search in Google Scholar

53Hoppe, S., Schrauwen, C., Fonteix, C.: Pla F. 8th International Workshop on Polymer Reaction Engineering, p. 123 (2004)Search in Google Scholar

54Gaylord, N. G., Elayaperumal, P.: Die ang. Makromol. Chem. 117, p. 195 (1983)10.1002/apmc.1983.051170115Search in Google Scholar

55Li, H. M., Chen, H. B., Shen, Z. G.: Polymer43, p. 5455 (2002)10.1016/S0032-3861(02)00369-5Search in Google Scholar

56Jo, W. H., Park, C. D., Lee, M. S.: Polymer37, p. 1709 (1996)10.1016/0032-3861(96)83723-2Search in Google Scholar

57Kesselmeier, R., Moritz, H. U.: Polym. React. Eng134, p. 207 (1998)Search in Google Scholar

58Passaglia, E., Coiai, S., Ricci, L., Ciardelli, F.: Macromol. Symp. 218 p. 61 (2004)Search in Google Scholar

59Coltelli, M. B., Angiuli, M., Passaglia, E., Casevetro, V., Ciardelli, F.: Macromolecules39, p. 2153 (2006)10.1021/ma051893oSearch in Google Scholar

60Ranganathan, S., Baker, W. E., Russel, K. E., Whitney, R. A.: J. Polym. Sci.,: Part A: Polym. Chem. 37, p. 1609 (1999)10.1002/(SICI)1099-0518(19990601)37:11<1609::AID-POLA6>3.0.CO;2-HSearch in Google Scholar

61Mani, R., Bhattacharya, M., Tang, J.: J. Polym. Sci.,: Part A: Polym. Chem. 37, p. 1693 (1999)10.1002/(SICI)1099-0518(19990601)37:11<1693::AID-POLA15>3.0.CO;2-YSearch in Google Scholar

62Bouilloux, A., Druz, J., Lambla, M.: Polym. Process. Eng. 3, p. 235 (1986)Search in Google Scholar

63Lambla, M., Druz, J., Bouilloux, A.: Polym. Eng. Sci. 27, p. 1221 (1987)10.1002/pen.760271604Search in Google Scholar

64Cassagnau, P., Bert, M., Verney, V., Michel, A.: Polym. Eng. Sci. 32, p. 998 (1992)10.1002/pen.760321504Search in Google Scholar

65Cassagnau, P., Bert, M., Verney, V., Michel, A.: Polymer34, p. 124 (1993)10.1016/0032-3861(93)90294-KSearch in Google Scholar

66Viallat, A., Cohen-Addad, J. P., Cassagnau, P., Michel, A.: Polymer37, p. 555 (1996)10.1016/0032-3861(96)83141-7Search in Google Scholar

67Cassagnau, P., Espinasse, I., Michel, A.: J. Appl. Polym. Sci. 58, p. 1393 (1995)10.1002/app.1995.070580821Search in Google Scholar

68De Loor, A., Cassagnau, P., Michel, A., Vergnes, B.: J. Appl. Polym. Sci. 53, p. 1675 (1994)10.1002/app.1994.070531214Search in Google Scholar

69Bonetti, J., Gondard, C., Petiaud, R., Llauro, M. F., Michel, A.: J. Organomet. Chem. 556, p. 41 (1994)Search in Google Scholar

70Llauro, M. F., Michel, A.: C.R. Chimie9, p. 1363 (2006)10.1016/j.crci.2006.06.003Search in Google Scholar

71Bounor-Legaré, V., Ferreira, I., Verbois, A., Cassagnau, P., Michel, A.: Polymer43, p. 6085 (2002)10.1016/S0032-3861(02)00364-6Search in Google Scholar

72Bounor-Legaré, V., Monnet, C., Llauro, M. F., Michel, A.: Polym. Inter. 53, p. 484 (2004)10.1002/pi.1424Search in Google Scholar

73Verbois, A., Cassagnau, P., Michel, A., Guillet, J., Raveyre, C.: Polym. Intern. 53, p. 523 (2004)10.1002/pi.1428Search in Google Scholar

74Bounor-Legare, V., Angelloz, C., Blanc, P., Cassagnau, P., Michel, A.: Polymer45, p. 1485 (2004)10.1016/j.polymer.2003.12.027Search in Google Scholar

75Jiguet, S., Bounor-Legaré, V., Mélis, F., Michel, A.: Int. Polym. Process. 20, p. 345 (2005)10.3139/217.2003Search in Google Scholar

76Van Rijswijk, K., Bersee, H. E. N.: Composites Part A: Applied Science and Manufacturig, Vol. date200738A, p. 666 (2006)10.1016/j.compositesa.2006.05.007Search in Google Scholar

77Illing, G.: Modern Plastics8, p. 70 (1969)Search in Google Scholar

78Menges, G., Bartilla, T.: Polym. Eng. Sci. 27, p. 1216 (1987)10.1002/pen.760271603Search in Google Scholar

79Kye, H., White, J. L.: J. Appl. Polym. Sci. 52, p. 1249 (1994)10.1002/app.1994.070520910Search in Google Scholar

80Hornsby, P. R., Tung, J. F., Tarverdi, K.: J. Appl. polym. Sci. 53, p. 891 (1994)10.1002/app.1994.070530705Search in Google Scholar

81Michaeli, W., Grefenstein, A., Berghaus, U.: Polym. Eng. Sci. 35, p. 1485 (1995)10.1002/pen.760351902Search in Google Scholar

82Michaeli, W., Grefenstein, A.: Adv. Polym. Technol. 14, p. 263 (1995)10.1002/adv.1995.060140401Search in Google Scholar

83Lee, B. H., White, J. L.: Polym. Process. 16, p. 172 (2001)10.3139/217.1636Search in Google Scholar

84Barni, M. M. S., Assempour, H., Nazockdast, H.: Polym. Process. 21, p. 230 (2006)10.3139/217.0074Search in Google Scholar

85Wollny, A., Nitz, H., Faulhammer, H., Hoogen, N., Mülhaupt, R.: J. Appl. Polym. Sci. 90, p. 344 (2003)10.1002/app.12577Search in Google Scholar

86Michaeli, W., Grefenstein, A., Frings, W.: Adv. Polym. Technol. 12, p. 25 (1993)10.1002/adv.1993.060120103Search in Google Scholar

87Gao, S., Zhang, Y., Zheng, A., Huining, X.: J. Appl. Polym. Sci. 91, p. 2265 (2004)10.1002/app.13341Search in Google Scholar

88Gao, S., Zhang, Y., Zheng, A., Huining, X.: Polym. Adv. Technol. 15, p. 185 (2004)10.1002/pat.436Search in Google Scholar

89Stuber, N. P., Tirrel, M.: Polym. Process. Eng. 3, p. 71 (1985)Search in Google Scholar

90Ganzeveld, K. J., Janssen, L. P. B. M.: Canadian J. Chem. Eng. 71, p. 411 (1993)10.1002/cjce.5450710310Search in Google Scholar

91Jongbloed, H. A., Kiewiet, J. A., Van Dijk, J. H., Janssen, L. P. B. M.: Polym. Eng. Sci. 35, p. 1569 (1995)10.1002/pen.760351911Search in Google Scholar

92Berthet, R., Chalamet, Y., Taha, M., Zerrouki, A.: Macromol. Mater. Eng. 291, p. 720 (2006)10.1002/mame.200500428Search in Google Scholar

93US Patent 3233025 (1966) Frye B. F.Search in Google Scholar

94US Patent 4055549 (1977) Rausch, K. W., McClellan, G.Search in Google Scholar

95US Patent 4245080 (1981) Quiring, B., Niederdellman, G.Search in Google Scholar

96Hyun, M. E., Kim, S. C.: Polym. Eng. Sci. 28, p. 743 (1988)10.1002/pen.760281107Search in Google Scholar

97Lu, G., Kalyon, D. M., Yilgör, I., Yilgör, E.: Polym. Eng. Sci. 43, p. 1863 (2003)10.1002/pen.10158Search in Google Scholar

98Bouilloux, A., Macosko, C. W., Kotnour, T.: Ind. Eng. Chem. Res. 30, p. 2431 (1991)10.1021/ie00059a011Search in Google Scholar

99Ganzeveld, K. J., Janssen, L. P. B. M.: Polym. Eng. Sci. 32, p. 457 (1992)10.1002/pen.760320702Search in Google Scholar

100Janssen, L. P. B. M.: Twin Screw Extrusion, Elsevier Science Publishers, New York (1978)Search in Google Scholar

101Cassagnau, P., Nietsch, T., Michel, A.: Int. Polym. Process. 14, p. 144 (1999)10.3139/217.1531Search in Google Scholar

102Hoppe, S., Santini, I., Pla, F.: Récents Progrès en Génie des Procédés13, p. 223 (1999)Search in Google Scholar

103Semsarzadeh, M. A., Navarchian, A. H., Morshedian, J.: Adv. Polym. Technol.23, p. 239 (2004)10.1002/adv.20014Search in Google Scholar

104Heijkants, R. G. J. C., Schwab, L. W., Van Calck, R. V., De Groot, J. H., Pennings, A. J., Schouten, A. J.: Polymer46, p. 8981 (2005)10.1016/j.polymer.2005.06.089Search in Google Scholar

105Verhoeven, V. W. A., Padsalgikar, A. D., Ganzeveld, K. J., Janssen, L. P. B. M.: Int. Polym. Process. 21, p. 295 (2006)10.3139/217.0101Search in Google Scholar

106Yang, W. P., Macosko, C. W., Wellinghoff, S. T.: Polymer27, p. 1235 (1986)10.1016/0032-3861(86)90012-1Search in Google Scholar

107Endres, W., Lechner, M. D., Steinberger, R.: Macromol. Mater. Eng. 288, p. 525 (2003)10.1002/mame.200390050Search in Google Scholar

108Jerome, R., Ropson, N., Dubois, P., Theyssie, P.: Macromolecules29, p. 1965 (1996)10.1021/ma951738hSearch in Google Scholar

109Dubois, P., Degee, P., Ropson, N., Jerome, R.: Plast. Eng. 40, p. 247 (1997)Search in Google Scholar

110Kubies, D., Pantoustier, N., Dubois, P., Rulmont, A., Jerome, R.: Macromolecules35, p. 3318 (2002)10.1021/ma0116497Search in Google Scholar

111Cayuela, J., Bounor-Legaré, V., Cassagnau, P., Michel, A.: Macromolecules39, p. 1338 (2006)10.1021/ma051272vSearch in Google Scholar

112US Patent 5801224 (1998) Narayan, R., Krishnan, M., Snook, J.B., Gupta, A., Dubois, P.Search in Google Scholar

113US Patent 5906783 (1999) Narayan, R., Krishnan, M., Snook, J.B., Gupta, A., Dubois, P.Search in Google Scholar

114US Patent 5969089 (1999) Narayan, R., Krishnan, M., Snook, J.B., Gupta, A., Dubois, P.Search in Google Scholar

115Gimenez, J., Cassagnau, P., Boudris, M., Michel, A.: Récents Progrès en Génie des Procédés13, p. 231 (1999)Search in Google Scholar

116Gimenez, J., Boudris, M., Cassagnau, P., Michel, A.: Polym. React. Eng. 8, p. 135 (2000)10.1080/10543414.2000.10744545Search in Google Scholar

117Kim, B. J., White, J. L.: Int. Polym. Process. 17, p. 33 (2002)Search in Google Scholar

118Kim, B. J., White, J. L.: J. Appl. Polym. Sci. 94, p. 1007 (2004)10.1002/app.20855Search in Google Scholar

119Raquez, J. M., Degee, P., Dubois, P., Balakrishnan, S., Narayan, R.: Polym. Eng. Sci. 45, p. 622 (2005)10.1002/pen.20312Search in Google Scholar

120Balakrishnan, S., Krishnan, M., Narayan, R., Dubois, P.: Polym. Eng. Sci. 46, p. 235 (2006)10.1002/pen.20344Search in Google Scholar

121Hamaide, T., Lavit, E.: Polym. Bull. 48, p. 173 (2002)10.1007/s00289-002-0025-zSearch in Google Scholar

122Jacobsen, S., Degee, P., Fritz, H. G., Dubois, P., Jérôme, R.: Polym. Eng. Sci. 39, p. 1311 (1999)10.1002/pen.11518Search in Google Scholar

123Jacobsen, S., Fritz, H. G., Degee, P., Dubois, P., Jerome, R.: Industrial Crops and Products11, p. 265 (2000)10.1016/S0926-6690(99)00053-9Search in Google Scholar

124Jacobsen, S., Fritz, H. G., Degee, P., Dubois, P., Jérôme, R.: Polymer41, p. 3395 (2000)10.1016/S0032-3861(99)00507-8Search in Google Scholar

125Raquez, J. M., Degee, P., Nabar, Y., Narayan, R., Dubois, P.: C.R. Chimie9, p. 1370 (2006)10.1016/j.crci.2006.09.004Search in Google Scholar

126Fakirov, S.: Handbook of Thermoplastics Polyesters, Homopolymers, Copolymers, Blends and Composites, Wiley-VCH, Weinheim (2002)10.1002/3527601961Search in Google Scholar

127Scheirs, J., Long, T. E.: Modern Polyesters, Chemistry and Technology of Polyesters and Copolyesters, Wiley &Sons, New York (2003)10.1002/0470090685Search in Google Scholar

128Maréchal, E.: Polyesters, Synthesis and Chemical Aspects, in: Handbook of Thermoplastics Polyesters, Homopolymers, Copolymers, Blends and Composites, Fakirov, S. (Ed.), Wiley-VCH, Weinheim (2002)10.1002/3527601961.ch1Search in Google Scholar

129Rieckmann, T., Völker, S.: Poly(ethylene terephthalate): Polymerization-mechanism, Catalyst, Kinetics, Mass Transfer and Reactor design, in: Modern polyesters: Chemistry and Technology of Polyesters and Copolyesters, Scheirs, J., Long, T. E. (Eds.), Wiley&Sons, New York (2003)Search in Google Scholar

130Jadhav, J. Y., Kantor, S. W.: Polyesters, Thermoplastics, in: Encyclopedia of Polymer Science and Technology. Wiley Interscience, New York (1988)Search in Google Scholar

131Hanimann, K.: Chemical Fibers International49, p. 24 (1999)Search in Google Scholar

132Bhaskar, V., Gupta, S. K., Ray, A. K.: AIChE J. 46, p. 1046 (2000)10.1002/aic.690460516Search in Google Scholar

133Heffelfinger, C. J., Knox, K. L.: Science and Technology of Polymer Films. Wiley Interscience, New York (1971)Search in Google Scholar

134Samant, K. D.: Ng K.M. AIChE J. 45, p. 1808 (1999)10.1002/aic.690450816Search in Google Scholar

135Choi, K. Y.: Polym. Eng. Sci. 27, p. 1703 (1987)10.1002/pen.760272210Search in Google Scholar

136Shah, T. H., Bhatty, J. I., Gamlem, G. A., Dollimore, D.: J. Macomol. Sci.-Chem., A21 p. 431 (1984)10.1080/00222338408056559Search in Google Scholar

137Shah, T. H., Bhatty, J. I., Gamlem, G. A., Dollimore, D.: Polymer25, p. 1333 (1984)10.1016/0032-3861(84)90386-0Search in Google Scholar

138Munar, A., Pezzin, G., Pilati, F., Manaresi, P.,: Rheol. Acta28, p. 25 (1989)10.1007/BF01354765Search in Google Scholar

139Karayannidis, G. P., Kokkalas, D. E., Bikiaris, D. N.: J. Appl. Polym. Sci. 50, p. 2135 (1993)10.1002/app.1993.070501213Search in Google Scholar

140Aharoni, S. M.: Chap 2-Industrial Scale Production of Polyesters, Especially Poly(ethylene Terephthalate), in: Handbook of Thermoplastics Polyesters, Homopolymers, Copolymers, Blends and Composites, Fakirov, S. (Ed.) Wiley VCH, Weinheim (2002)10.1002/3527601961.ch2Search in Google Scholar

141Culbert, B., Christel, A.: Continuous Solid-state Polycondensation of Polyesters, in: Modern Polyesters: Chemistry and Technology of Polyesters and Copolyesters, Scheirs, J., Long, T. E. (Eds.), Wiley&Sons, New York (2003)Search in Google Scholar

142Göltner, W.: Solid-State Polycondensation of Polyester resins: Fundamentals and Industrial Production, in: Modern Polyesters: Chemistry and Technology of Polyesters and Copolyesters, Scheirs, J., Long, T. E. (Eds.), Wiley&Sons, New York (2003)Search in Google Scholar

143US Patent 5225483 (1993) Maier, T. R., Chawla, S. K.Search in Google Scholar

144Karayannidis, G. P., Kokkalas, D. E., Bikiaris, D. N.: J. Appl. Polym. Sci. 56, p. 405 (1995)10.1002/app.1995.070560311Search in Google Scholar

145Baker, D. A., East, G. C., Mukhopadahyay, S. K.: J. Appl. Polym. Sci. 79, p. 1092 (2001)10.1002/1097-4628(20010207)79:6<1092::AID-APP130>3.0.CO;2-NSearch in Google Scholar

146Baker, D. A., East, G. C., Mukhopadahyay, S. K.: J. Appl. Polym. Sci. 88, p. 1556 (2003)10.1002/app.11971Search in Google Scholar

147Xanthos, M.: Reactive Modification/Compatibilization of Polyesters, in: Handbook of Thermoplastics Polyesters, Homopolymers, Copolymers, Blends and Composites, Fakirov, S. (Ed.) Wiley VCH, Weinheim (2002)10.1002/3527601961.ch18Search in Google Scholar

148Scheirs, J.: Additives for the Modification of Poly(ethylene terphthalate) to Produce Engineering-grade Polymers, in: Modern Polyesters, Chemistry and Technology of Polyesters and Copolyesters. Wiley&Sons, New York (2003)Search in Google Scholar

149US Patent 5422381 (1995) Al Ghatta, H. A. K., Severini, T., Astarita, L.Search in Google Scholar

150US Patent 5000991 (1991) Hayashi, M., Amano, N., Taki, T., Hirai, T.Search in Google Scholar

151Awaja, F., Daver, F., Kosior, E.: Polym. Eng. Sci. 44, p. 1579 (2004)10.1002/pen.20155Search in Google Scholar

152Inata, H., Matsumura, S.: J. Appl. Polym. Sci. 32, p. 4581 (1986)10.1002/app.1986.070320423Search in Google Scholar

153Dzieciol, M., Trzeszczynski, J.: J. Appl. Polym. Sci. 77, p. 1894 (2000)10.1002/1097-4628(20000829)77:9<1894::AID-APP5>3.0.CO;2-YSearch in Google Scholar

154Karayannidis, G. P., Psalida, E. A.: J. Appl. Polym. Sci. 77, p. 2206 (2000)10.1002/1097-4628(20000906)77:10<2206::AID-APP14>3.0.CO;2-DSearch in Google Scholar

155Torres, N., Robin, J. J., Boutevin, B.: J. Appl. Polym. Sci. 79, p. 1816 (2001)10.1002/1097-4628(20010307)79:10<1816::AID-APP100>3.0.CO;2-RSearch in Google Scholar

156Torres, N., Robin, J. J., Boutevin, B.: J. Appl. Polym. Sci. 81, p. 581 (2001)10.1002/app.1473Search in Google Scholar

157Aoki, Y., Kinjo, M., Kuramoshi, T., Hashimoto, K., Ibonai, M.: Seikei Kako6, p. 811 (1994)10.4325/seikeikakou.6.811Search in Google Scholar

158Bikiaris, D. N., Karayannidis, G. P.: J. Polym. Sci.,: Part A: Polym. Chem. 33, p. 1705 (1995)10.1002/pola.1995.080331017Search in Google Scholar

159Bikiaris, D. N., Karayannidis, G. P.: Polym. Degrad. Stabil. 63, p. 213 (1999)10.1016/S0141-3910(98)00094-9Search in Google Scholar

160Guo, B., Chan, C. M.: J. Appl. Polym. Sci. 71, p. 1827 (1999)10.1002/(SICI)1097-4628(19990314)71:11<1827::AID-APP13>3.0.CO;2-7Search in Google Scholar

161Guo, B., Chan, C. M.: J. Appl. Polym. Sci. 79, p. 1816 (2001)10.1002/1097-4628(20010307)79:10<1816::AID-APP100>3.0.CO;2-RSearch in Google Scholar

162Xanthos, M., Young, M. W., Karayannidis, G. P., Bikiaris, D. N.: Polym. Eng. Sci. 41, p. 643 (2001)10.1002/pen.10760Search in Google Scholar

163Dhavalikar, R., Yamaguchi, M., Xanthos, M.: J. Polym. Sci. Part A: Polym. Chem. 41, p. 958 (2003)10.1002/pola.10641Search in Google Scholar

164Fenouillot, F., Hedreul, C., Forsythe, J., Pascault, J. P.: J. Appl. Polym. Sci. 87, p. 1995 (2003)10.1002/app.11615Search in Google Scholar

165Dhavalikar, R., Xanthos, M.: J. Appl. Polym. Sci. 87, p. 643 (2003)10.1002/app.11425Search in Google Scholar

166Japon, S., Boogh, L., Leterrier, Y., Manson, A. E.: Polymer41, p. 5809 (2000)10.1016/S0032-3861(99)00768-5Search in Google Scholar

167Bikiaris, D. N., Karayannidis, G. P.: J. Polym Sci.,: Part A: Polym. Chem. 34, p. 13371996)10.1002/(SICI)1099-0518(199605)34:7<1337::AID-POLA22>3.0.CO;2-9Search in Google Scholar

168Lacoste, J. F., Bounor-Legaré, M. F., Llauro, M. F., MonnetC., Cassagnau, P., MichelA.: J. Polym. Sci.,: Part A: Polym. Chem. 43, p. 2207 (2005)10.1002/pola.20696Search in Google Scholar

169Berti, C., Celli, A., Colonna, M., Fabbri, P., Fiorini, M., Marianucci, E.: Macromol. Symp. 176 p. 211 (2001)10.1002/1521-3900(200112)176:1<211::AID-MASY211>3.0.CO;2-HSearch in Google Scholar

170Bikiaris, D. N., Karavelidis, V., Karayannidis, G. P.: Macromol. Rapid. Commun. 27, p. 1199 (2006)10.1002/marc.200600268Search in Google Scholar

171Ciolacu, F. C. L., Choudhury, N. R., Dutta, N., Kosior, E.: Macromolecules40, p. 265 (2007)10.1021/ma061060dSearch in Google Scholar

172Yilmazer, U., Xanthos, M., Bayram, G., Tan, V.: J. Appl. Polym. Sci. 75, p. 1371 (2000)10.1002/(SICI)1097-4628(20000314)75:11<1371::AID-APP8>3.0.CO;2-5Search in Google Scholar

173Forsythe, J. S., Cheah, K., Nisbet, D. R., Gupta, R. K., Lau, A., Donovan, A. R., O'Shea, M. S., Moad, G.: J. Appl. Polym. Sci. 100, p. 3646 (2006)10.1002/app.23166Search in Google Scholar

174Japon, S., Luciani, A., Nguyen, Q. T., Leterrier, Y., Manson, J. A. E.: Polym. Eng. Sci. 41, p. 1299 (2001)10.1002/pen.10830Search in Google Scholar

175Incarnato, L., Scarfto, P., Di Maio, L., Acierno, D.: Polymer41, p. 6825 (2000)10.1016/S0032-3861(00)00032-XSearch in Google Scholar

176Xanthos, M., Wan, C., Dhavalikar, R., Karayannidis, G. P., Bikiaris, D. N.: Polym. Intern. 53, p. 1161 (2004)10.1002/pi.1526Search in Google Scholar

177Dhavalikar, R., Xanthos, M.: Polym. Eng. Sci. 44, p. 474 (2004)10.1002/pen.20042Search in Google Scholar

178Colomines, G., Robin, J. J., Tersac, G.: Polymer46, p. 3230 (2005)10.1016/j.polymer.2005.02.047Search in Google Scholar

179Nadkarni, V. M.: Chap.26: Recycling of Polyesters, in: Handbook of Thermoplastics Polyesters, Homopolymers, Copolymers, Blends and Composites, Fakirov, S. (Ed.), Wiley-VCH, Weinheim (2002)10.1002/3527601961.ch26Search in Google Scholar

180Spychaj, T.: Chemical Recycling of PET: Methods and Products, in: Handbook of Thermoplastics Polyesters, Homopolymers, Copolymers, Blends and Composites, Fakirov, S. (Ed.), Wiley-VCH, Weinheim (2002)10.1002/3527601961.ch27Search in Google Scholar

181Karger-Kocsis, J.: Recycling Option for Post-consumer and PET-containing Wastes by Melt Blending, in: Handbook of Thermoplastics Polyesters, Homopolymers, Copolymers, Blends and Composites, Fakirov, S. (Ed.), Wiley-VCH, Weinheim (2002)10.1002/3527601961.ch28bSearch in Google Scholar

182Cornell, D. D.: Recycling Polyesters by Chemical Depolymerization, in: Modern Polyesters, Chemistry and Technology of Polyesters and Copolyesters, Wiley&Sons, New York (2003)Search in Google Scholar

183Karayannidis, G. P., Achilias, D. S.: Macromol. Mater. Eng. 292, p. 128 (2007)10.1002/mame.200600341Search in Google Scholar

184Karayannidis, G. P., Nikolaidis, A. K., Sideridou, I. D., Bikiaris, D. N., Achilias, D. S.: Macromol. Mater. Eng. 291, p. 1338 (2006)10.1002/mame.200600243Search in Google Scholar

185Pardal, F., Tersac, G.: Polym. Degrad. Stab. 91, p. 2840 (2006)10.1016/j.polymdegradstab.2006.09.009Search in Google Scholar

186Kamal, M. R., Lai-Fook, R. A., Yalcinyuva, T.: SPE ANTEC Techn. Papers53, p. 2896 (1994)Search in Google Scholar

187Dannoux, M., Cassagnau, P., Michel, A.: Canadian J. Chem. Eng. 80, p. 1075 (2002)10.1002/cjce.5450800609Search in Google Scholar

188Colomines, G., Riva, F., Lacoste, M. L., Robin, J. J.: Macromol. Mater. Eng. 290, p. 710 (2005)10.1002/mame.200400391Search in Google Scholar

189Kim, B. J., White, J. L.: J. Appl. Polym. Sci. 88, p. 1429 (2003)10.1002/app.11792Search in Google Scholar

190Kim, I., White, J. L.: SPE ANTEC Techn. Papers62, p. 2809 (2004)Search in Google Scholar

191Kim, I., White, J. L.: J. Appl. Polym. Sci. 96, p. 1875 (2005)10.1002/app.21494Search in Google Scholar

192Stevels, W. M., Bernard, A., Van de Witte, P., Dijstra, P. J., Feijen, J.: J. Appl. Polym. Sci. 62, p. 1295 (1996)10.1002/(SICI)1097-4628(19961121)62:8<1295::AID-APP20>3.0.CO;2-5Search in Google Scholar

193Zuniga-Martinez, J. A., Yanez-Flores, J. G.: Polymer Bulletin53, p. 25 (2004)10.1007/s00289-004-0314-9Search in Google Scholar

194Rached, R., Hoppe, S., Jonquieres, A., Lochon, P., Pla, F.: J. Appl. Polym. Sci. 102, p. 2818 (2006)10.1002/app.24547Search in Google Scholar

195Cayuela, J.: PhD Thesis, University of Lyon 1 (2006)Search in Google Scholar

196Hu, G. H., Cartier, H., Plummer, C.: Macromolecules32, p. 4713 (1999)10.1021/ma981924ySearch in Google Scholar

197Hu, G. H., Li, H., Feng, L. F.: Macromolecules35, p. 22 (2002)Search in Google Scholar

198Willett, J. L., Finkenstadt, V. L.: Polym. Eng. Sci. 43, p. 1666 (2003)10.1002/pen.10140Search in Google Scholar

199Madbouly, S. A., Otaigbe, J. U., Ougizawa, T.: Macromol. Chem. Phys. 207, p. 1233 (2006)10.1002/macp.200600177Search in Google Scholar

200Valle, M.: PhD Thesis, University of Lyon 1 (2006)Search in Google Scholar

201Becquart, F., Taha, M., Zerroukhi, A., Kaczun, J., Llauro, M. F.: Eur. Pol. J. 43, p. 1549 (2007)10.1016/j.eurpolymj.2006.12.035Search in Google Scholar

202Shi, Q., Zhu, L., Cai, C., Yin, J. H., Costa, G.: J. Appl. Polym. Sci. 101, p. 4301 (2006)10.1002/app.23877Search in Google Scholar

203Badel, T.: Ph. D Thesis, University of Lyon 1 (2005)Search in Google Scholar

204Pernot, H., Baumert, M., Court, F., Leibler, L.: Nature Materials1, p. 54 (2002)10.1038/nmat711Search in Google Scholar

205Ruzette, A. V., Leibler, L.: Nature Materials4, p. 19 (2005)10.1038/nmat1295Search in Google Scholar

206Freluche, M., Iliopoulos, I., Flat, J. J., Ruzette, A. V., Leibler, L.: Polymer46, p. 6554 (2005)10.1016/j.polymer.2005.05.009Search in Google Scholar

207Freluche, M., Iliopoulos, I., Milléquant, M., Flat, J. J., Leibler, L.: Macromolecules39, p. 6905 (2006)10.1021/ma060036xSearch in Google Scholar

208Steurer, A., Hellmann, G. P.Polym. Adv. Technol.9, p. 297 (1998)10.1002/(SICI)1099-1581(199805)9:5<297::AID-PAT784>3.0.CO;2-7Search in Google Scholar

209Orr, C. A., Adedeji, A., Hirao, A., Bates, F. S., Macosko, C. W.: Macromolecules30, p. 1243 (1997)10.1021/ma961574kSearch in Google Scholar

210Jakisch, L., Komber, H., Häußler, L., Böhme, F.: Macromol. Symp. 149, p. 237 (2000)10.1002/1521-3900(200001)149:1<237::AID-MASY237>3.0.CO;2-XSearch in Google Scholar

211Jakisch, L., Komber, H., Böhme, F.: J. Polym. Sci. Part A: Polymer Chemistry41, p. 655 (2003)10.1002/pola.10612Search in Google Scholar

212Jakisch, L., Komber, H., Wursche, R., Böhme, F.: J. Appl. Polym. Sc.94 p. 2170 (2004)10.1002/app.21159Search in Google Scholar

213Cioffi, M., Ganzeveld, K. J., Hoffmann, A. C., Janssen, L. P. B. M.: Polym. Eng. Sci. 42, p. 2383 (2002)10.1002/pen.11124Search in Google Scholar

214Cassagnau, P., Gimenez, J., Bounor-Legaré, V., Michel, A.: C.R. Chimie9, p. 1351 (2006)10.1016/j.crci.2006.06.005Search in Google Scholar

215Winter, H. H., Mours, M.: Adv. Pol. Sci. 134, p. 135 (1997)10.1016/S0021-9150(97)81746-7Search in Google Scholar

216Cassagnau, P., Melis, F., Michel, A.: J. Appl. Polym. Sci. 65, p. 239 (1997)10.1002/(SICI)1097-4628(19970919)65:12<2395::AID-APP12>3.0.CO;2-0Search in Google Scholar

217Gimenez, J., Cassagnau, P., Michel, A.: J. Rheology44, p. 527 (2000)10.1122/1.551099Search in Google Scholar

218Verhoeven, V. W. A., Van Vondel, M. P. Y., Ganzeveld, K. J., Janssen, L. P. B. M.: Polym. Eng. Sci. 44, p. 1648 (2004)10.1002/pen.20163Search in Google Scholar

219Gimenez, J., Cassagnau, P., Fulchiron, R., Michel, A.: Macromol. Chem. Phys. 201, p. 479 (2000)10.1002/(SICI)1521-3935(20000301)201:5<479::AID-MACP479>3.0.CO;2-FSearch in Google Scholar

220Dubois, C., Aït Kadi, A., Tanguy, P. A.: J. Rheol. 42, p. 435 (1998)10.1122/1.550938Search in Google Scholar

221Cassagnau, P., Michel, A., Aulagner-Revenu, P., Carrot, C., Guillet, J.: Polym. Eng. Sci. 40, p. 880 (2000)10.1002/pen.11216Search in Google Scholar

222Sanghai, J. S., Saraf, D. N., Gupta, S. K.: Polymer47, p. 3028 (2006)10.1016/j.polymer.2006.03.007Search in Google Scholar

223Sanghai, J. S., Saraf, D. N., Gupta, S. K.: Rheol Acta46, p. 455 (2007)10.1007/s00397-006-0140-0Search in Google Scholar

224Aulagner, P., Ainser, A., Carrot, C., Guillet, J.: J. Polym. Eng. 20, p. 381 (2000)10.1515/POLYENG.2000.20.5.381Search in Google Scholar

225Yasuda, K., Armstrong, R. C., Cohen, R. E.: Rheol. Acta20, p. 163 (1981)10.1007/BF01513059Search in Google Scholar

226Carrot, C., Revenu, P., Guillet, J.: J. Appl. Polym. Sci. 61, p. 1887 (1996)10.1002/(SICI)1097-4628(19960912)61:11<1887::AID-APP4>3.0.CO;2-FSearch in Google Scholar

227Cassagnau, P., Montfort, J. P., Marin, G., Monge, P.: Rheol. Acta32, p. 156 (1993)10.1007/BF00366679Search in Google Scholar

228Marin, G., Menezes, E., Raju, V. R., Graessley, W. W.: Rheol Acta19, p. 462 (1980)10.1007/BF01524019Search in Google Scholar

229Ponsard-Fillette, M., Barres, C., Cassagnau, P.: Polymer46, p. 10256 (2005)10.1016/j.polymer.2005.08.015Search in Google Scholar

230Ferry, J. D.: Viscoelastic Properties of Polymers. Wiley, New York (1980)Search in Google Scholar

231Poulesquen, A., Vergnes, B., Cassagnau, P., Gimenez, J., Michel, A.: Intern. Polym. Sci. 16, p. 31 (2001)10.3139/217.1626Search in Google Scholar

232Choulak, S., Couenne, F., Le Gorrec, Y., Jallut, C., Cassagnau, P., Michel, A.: Ind. Eng. Chem. Res. 43, p. 7373 (2004)10.1021/ie0342964Search in Google Scholar

233Cioffi, M., Hoffmann, A. C., Janssen, L. P. B. M.: Polym. Eng. Sci. 41, p. 595 (2001)10.1002/pen.10756Search in Google Scholar

234Navarchian, A. H., Picchioni, F., Janssen, L. P. B. M.: Polym. Eng. Sci. 45, p. 279 (2005)10.1002/pen.20280Search in Google Scholar

235Bruzzone, S., Malvaldi, M.: J. Chem. Phys. 125, p. 64909/1 (2006)10.1063/1.2244552Search in Google Scholar

236Cassagnau, P., Nietsch, T., Bert, M., Michel, A.: Polymer40, p. 131 (1998)10.1016/S0032-3861(98)00210-9Search in Google Scholar

237Cassagnau, P., Fenouillot, F.: Polymer45, p. 8031 (2004)10.1016/j.polymer.2004.09.028Search in Google Scholar

238Bousmina, M., Aït-Kadi, A., Faisant, J. B.: J. Rheology43, p. 415 (1999)10.1122/1.551044Search in Google Scholar

239Choplin, L., Marchal, P.: Proceeding of XIIth International Congress on Rheology, p. 665 (1996)Search in Google Scholar

240Aït-Kadi, A., Marchal, P., Choplin, L., Chrissemant, A. S., Bousmina, M.: Canadian J. Chem. Eng. 80, p. 1166 (2002)10.1002/cjce.5450800618Search in Google Scholar

241Lacoste, C., Choplin, L., Cassagnau, P., Michel, A.: Applied Rheology15, p. 314 (2005)10.1515/arh-2005-0015Search in Google Scholar

242Cassagnau, P., Fenouillot, F.: Polymer45, p. 8019 (2004)10.1016/j.polymer.2004.09.027Search in Google Scholar

243Vrentas, J. S., Duda, J. L.: J. Polym. Sci. Polym. Phys. Ed15, p. 441 (1977)10.1002/pol.1977.180150304Search in Google Scholar

244Vrentas, J. S., Vrentas, C. M.: J. Polym. Sci.,: Part B: Polym. Phys. 39, p. 1529 (2001)10.1002/polb.1126Search in Google Scholar

245Pickup, S., Blum, F.: Macromolecules22, p. 3961 (1989)10.1021/ma00200a025Search in Google Scholar

246Cohen, M. H., Turnbull, D.: J. Chem. Phys. 31, p. 1164 (1959)10.1063/1.1730566Search in Google Scholar

247Vrentas, J. S., Duda, J. L.: J. Polym. Sci.,: Polym. Phys. Ed.15, p. 403 (1977)10.1002/pol.1977.180150302Search in Google Scholar

248Vrentas, J. S., Duda, J. L.: J. Polym. Sci. Polym. Phys. Ed. 15, p. 417 (1977)10.1002/pol.1977.180150303Search in Google Scholar

249Vrentas, J. S., Vrentas, C. M.: Macromolecules26, p. 1277 (1993)10.1021/ma00058a013Search in Google Scholar

250Vrentas, J. S., Vrentas, C. M.: Macromolecules27, p. 4684 (1994)10.1021/ma00095a007Search in Google Scholar

251Vrentas, J. S., Vrentas, C. M., Faridi, N.: Macromolecules29, p. 3272 (1996)10.1021/ma9511356Search in Google Scholar

252Joubert, C., Cassagnau, P., Michel, A., Choplin, L.: J. Rheology46, p. 629 (2002)10.1122/1.1470521Search in Google Scholar

253Bella, R., Cassagnau, P., Fenouillot, F., Falk, L., Lacoste, C.: Polymer47, p. 5080 (2006)10.1016/j.polymer.2006.05.024Search in Google Scholar

254Van der Wal, D. J.: PhD Thesis University of Groningen (1998)Search in Google Scholar

255Petri, H. M., Wolf, B. A.: Macromol. Phys. 196, p. 2321 (1995)10.1002/macp.1995.021960719Search in Google Scholar

256Zielinski, J. M., Duda, J. L.: AIChE J. 38, p. 405 (1992)10.1002/aic.690380309Search in Google Scholar

257Hong, S. U.: Ind. Eng. Chem. Res34, p. 2536 (1995)10.1021/ie00046a040Search in Google Scholar

258Vrentas, J. S., Vrentas, C. M.: Eur. Polym. J. 34, p. 797 (1998)10.1016/S0014-3057(97)00205-XSearch in Google Scholar

259Tonge, M. P., Gilbert, R. G.: Polymer42, p. 1393 (2001)10.1016/S0032-3861(00)00518-8Search in Google Scholar

260Bousmina, M., Qiu, H., Grmela, M., Klemberg-Sapieha, J. E.: Macromolecules31, p. 8273 (1998)10.1021/ma980562rSearch in Google Scholar

261Qiu, H, Bousmina, M.: J. Rheol. 43, p. 551 (1999)10.1122/1.550994Search in Google Scholar

262Qiu, H., Bousmina, M.: Macromolecules33, p. 6588 (2000)10.1021/ma991948kSearch in Google Scholar

263Bella, R., Cassagnau, P., Fenouillot, F.: Macrom. Symp. 233 p. 59 (2005)10.1002/masy.200690029Search in Google Scholar

264Hu, G. H., Triouleyre, S., Lambla, M.: Polymer38, p. 545 (1997)10.1016/S0032-3861(96)00528-9Search in Google Scholar

265Cirman, C., Bouquey, M., Terrisse, J., Muller, R.: Appl. Rheology9, p. 108 (1999)10.1515/arh-2009-0008Search in Google Scholar

266Bouquey, M., Muller, R., Schlatter, G., Serra, C.: Polym. Bulletin53, p. 377 (2005)10.1007/s00289-005-0349-6Search in Google Scholar

267Serra, C., Bouquey, M., Schlatter, G., Muller, R.: J. Appl. Polym. Sci. 98, p. 1978 (2005)10.1002/app.22373Search in Google Scholar

268Boucher, E., Folkers, J. P., Hervet, H., Léger, L., Creton, C.: Macromolecules29, p. 774 (1996)10.1021/ma9509422Search in Google Scholar

269Xie, F., Zhou, C., Yu, W., Wu, D.: Polymer46, p. 8410 (2005)10.1016/j.polymer.2005.07.003Search in Google Scholar

270Lamnavar, K., Maazouz, A.: Rheo. Acta45, p. 411 (2006)10.1007/s00397-005-0062-2Search in Google Scholar

271Mskani, A., Chaumont, P., Cassagnau, P.: Rheologica Acta (2007) in pressSearch in Google Scholar

272Fields, S. D., Ottino, J. M.: Chem. Eng. Sci. 42, p. 459 (1987)10.1016/0009-2509(87)80008-8Search in Google Scholar

273Fields, S. D., Ottino, J. M.: Chem. Eng. Sci. 42, p. 467 (1987)10.1016/0009-2509(87)80009-XSearch in Google Scholar

274Tadmor, Z., Gogos, G.: Characterization of Mixtures and Mixing in Principles of Polymer Processing, Wiley, New York (1979)Search in Google Scholar

275Tadmor, Z., Gogos, G.: Reactive Polymer Processing, in: Principles of Polymer Processing, Wiley&Sons, Wiley-Interscience, New York (2006)Search in Google Scholar

276Ottino, J. M., Chella, R.: Polym. Eng. Sci. 23, p. 357 (1983)10.1002/pen.760230702Search in Google Scholar

277Matthews, G.: Polymer Mixing Technology. Elsevier Applied Science, New York (1982)Search in Google Scholar

278Manas-Zloczower, I., Tadmor, Z.: Mixing and Compounding of Polymers. Hanser, New York (1994)Search in Google Scholar

279White, J. L., Coran, A. Y., Moet, A.: Polymer Mixing. Hanser, Munich (1998)Search in Google Scholar

280Ottino, J. M.: Chem. Eng. Sci. 49, p. 4005 (1994)10.1016/S0009-2509(05)80004-1Search in Google Scholar

281Arratia, P. E., Shinbrot, T., Alvarez, M. M., Muzzio, F. J.: Physical Review Letters 94-084501, p. 1 (2005)10.1103/PhysRevLett.94.084501Search in Google Scholar PubMed

282Arratia, P. E., Voth, G. A., Gollub, J. P.: Physics of Fluids 17-053102, p. 1 (2005)10.1063/1.1909184Search in Google Scholar

283Arratia, P. E., Kukura, J., Lacombe, J., Muzzio, F. J.: AIChE J. 52, p. 2310 (2006)10.1002/aic.10847Search in Google Scholar

284Agassant, J. F., Poitou, A.: A Kinematic Approach of Distributive Mixing, in: Mixing and Compounding of Polymers, Manas Zloczower, I. (Ed.) Progress in Polymer Processing Series. Hanser Publishers, Munich (1994)Search in Google Scholar

285Meijer, H. E. H., Janssen, J. M. H.: In Mixing and Compounding of PolymersManas-Zloczower, I., Tadmor, Z. (Eds) Hanser, New York, p. 85 (1994)Search in Google Scholar

286Tang, H., Wrobel, L. C.: Surface Tension-driven Flows and Application, Conference-general Review, Savino, R. (Ed.), Research Signpost, Trivandrum, India, p.225304 (2006)Search in Google Scholar

287Kalyon, D. M., Sangani, H. N.: Polym. Eng. Sci. 29, p. 1018 (1989)10.1002/pen.760291508Search in Google Scholar

288Bigio, D., Erwin, L.: SPE ANTEC Tech. Papers, p. 45 (1985)Search in Google Scholar

289Bigio, D., Stry, W.: Polym. Eng. Sci. 30, p. 153 (1990)10.1002/pen.760300305Search in Google Scholar

290Kim, B. J., White, J. L.: Intern. Polym. Process.9, p. 108 (1994)Search in Google Scholar

291Jaffer, S. A., Bravo, V. L., Wood, P. E., Hrymak, A. N., Wright, J. D.: Polym. Eng. Sci. 40, p. 92 (2000)10.1002/pen.11217Search in Google Scholar

292Carneiro, O. S., Covas, J. A., Ferreira, J. A., Cerqueira, M. F.: Polym. Testing23, p. 925 (2004)10.1016/j.polymertesting.2004.05.001Search in Google Scholar

293De Loor, A., Cassagnau, P., Michel, A., Vergnes, B.: Int. Polym. Process. 9, p. 211 (1994)10.3139/217.940211Search in Google Scholar

294Cassagnau, P., Mijangos, M., Michel, A.: Polym. Eng. Sci. 31, p. 772 (1991)10.1002/pen.760311103Search in Google Scholar

295Oberlehner, J., Cassagnau, P., Michel, A.: Chem. Eng. Sci. 49, p. 3897 (1994)10.1016/0009-2509(94)00190-1Search in Google Scholar

296Poulesquen, A., Vergnes, B., Cassagnau, P., Michel, A., Carneiro, O. S., Covas, J. A.: Polym. Eng. Sci. 43, p. 1849 (2003)10.1002/pen.10157Search in Google Scholar

297Nietsch, T., Cassagnau, P., Michel, A.: Int. Polym. Process. 12, p. 307 (1997)10.3139/217.970307Search in Google Scholar

298Shearer, G., Tzoganakis, C.: Adv. Polym. Technol. 20, p. 169 (2001)10.1002/adv.1014Search in Google Scholar

299Shearer, G., Tzoganakis, C.: Polym. Eng. Sci. 41, p. 2206 (2001)10.1002/pen.10916Search in Google Scholar

300van den Einde, R. M., Kroon, P., Van der Goot, A. J., Boom, R. M.: Polym. Eng. Sci. 45, p. 271 (2005)10.1002/pen.20268Search in Google Scholar

301Brouwer, T., Todd, D. B., Janssen, L. P. B. M.: Int. Polym. Process. 17, p. 26 (2002)10.3139/217.1678Search in Google Scholar

302Hoppe, S., Detrez, C., Pla, F.: Polym. Eng. Sci. 42, p. 771 (2002)10.1002/pen.10989Search in Google Scholar

303Poulesquen, A, Vergnes, B.: Polym. Eng. Sci. 43, p. 1841 (2003)10.1002/pen.10156Search in Google Scholar

304Shearer, G., Tzoganakis, C.: Polym. Eng. Sci. 39, p. 1584 (1999)10.1002/pen.11552Search in Google Scholar

305Shearer, G., Tzoganakis, C.: Polym. Eng. Sci. 40, p. 1095 (2000)10.1002/pen.11237Search in Google Scholar

306Bravo, V. L., Hrymak, A. N., Wright, J. D.: Polym. Eng. Sci. 44, p. 779 (2004)10.1002/pen.20070Search in Google Scholar

307Haur-Horng, Y., Manas-Zloczower, I.: Int. Polym. Process. 9, p. 291 (1994)10.3139/217.940291Search in Google Scholar

308Wang, T. H., Manas-Zloczower, I.: Int. Polym. Process. 9, p. 3 (1994)10.3139/217.940003Search in Google Scholar

309Ainser, A., Sirakov, I., Guillet, J.: VIth International Conference on Material Forming- ESAFORM, Proceedings, p. 787 (2003)Search in Google Scholar

310Liu, S., Hrymak, A. N., Wood, P. E.: Chem. Eng. Sci. 61, p. 175 (2006)10.1016/j.ces.2005.10.026Search in Google Scholar

311Liu, S., Hrymak, A. N., Wood, P. E.: AIChE J. 52, p. 150 (2006)10.1002/aic.10608Search in Google Scholar

312Cheng, H., Manas-Zloczower, I.: Polym. Eng. Sci. 38, p. 926 (1998)10.1002/pen.10260Search in Google Scholar

313Manas-Zloczower, I., Cheng, H.: J. Reinforced Plastics and Composites17, p. 1076 (1998)10.1177/073168449801701202Search in Google Scholar

314Scott, C. E., Joung, S. K.: Polym. Eng. Sci. 36, p. 1666 (1996)10.1002/pen.10563Search in Google Scholar

315Burch, H. E., Scott, C. E.: Polymer42, p. 7313 (2001)10.1016/S0032-3861(01)00240-3Search in Google Scholar

316Cassagnau, P., Mélis, F., Bounor-Legaré, V.: Polym. Eng. Sci. 43, p. 923 (2003)10.1002/pen.10076Search in Google Scholar

317Cassagnau, P., Courmont, P., Melis, F., Puaux, J. P.: Polym. Eng. Sci. 45, p. 926 (2005)10.1002/pen.20346Search in Google Scholar

318Jana, S. C., Sau, M.: Polymer45, p. 1665 (2004)10.1016/j.polymer.2003.12.047Search in Google Scholar

319Adragna, L., Couenne, F., Cassagnau, P., Jallut, C.: submitted to Ind. Eng. Chem. Res (2007)Search in Google Scholar

320Fournier, M. C., Falk, L., Villermaux, J.: Chem. Sci. 51, p. 5053 (1996)10.1016/0009-2509(96)00270-9Search in Google Scholar

321Guichardon, P., Falk, L., Villermaux, J.: Chem. Eng. Sci. 52, p. 4649 (1997)10.1016/S0009-2509(97)85419-XSearch in Google Scholar

322Baldyga, J., Rozen, A., Mostert, F.: Chem. Eng. Sci. 69, p. 7 (1998)10.1016/S1385-8947(97)00101-0Search in Google Scholar

323Rozen, A., Bakker, R. A., Baldyga, J.: Trans IchemE Part A79 p. 938 (2001)10.1205/02638760152721163Search in Google Scholar

324Frey, J. H., Denson, C. D.: Chem. Eng. Sci. 43, p. 1967 (1988)10.1016/0009-2509(88)87070-2Search in Google Scholar

325Ganzeveld, K. J., Janssen, L. P. B. M.: Ind. Eng. Chem. Res. 33, p. 2398 (1994)10.1021/ie00034a022Search in Google Scholar

326Fredrickson, G. H., Leibler, L.: Macromolecules29, p. 2674 (1996)10.1021/ma951539ySearch in Google Scholar

327Xanthos, M., Patel, S. H.: Adv. Polym. Techn. 14, p. 151 (1995)10.1002/adv.1995.060140206Search in Google Scholar

328Coates, P. D., Barnes, S. E., Sibley, M. G., Brown, E. C., Edwards, H. G. M., Scowen, I. J.: Polymer44, p. 5937 (2003)10.1016/S0032-3861(03)00544-5Search in Google Scholar

329Barnes, S. E., Brown, E. C., Sibley, M. G., Edwards, H. G. M., Scowen, I. J., Coates, P. D.: Appl. Spectroscopy59, p. 611 (2005)10.1366/0003702053946001Search in Google Scholar

330Lachenal, G.: Analysis Magazine26, p. 20 (1998)Search in Google Scholar

331Hobbie, E. K., Migler, K. B., Han, C. C., Amis, E. J.: Ad. in Polym. Tech. 17, p. 307 (1998)10.1002/(SICI)1098-2329(199824)17:4<307::AID-ADV2>3.0.CO;2-VSearch in Google Scholar

332Migler, K. B., Bur, A. J.: Polym. Eng. Sci. 38, p. 213 (1998)10.1002/pen.10182Search in Google Scholar

333Migler, K. B., Hobbie, E. K., Qiao, F.,: Polym. Eng. Sci.39, p. 2282 (1999)10.1002/pen.11616Search in Google Scholar

334Qiao, F., Migler, K. B., Hunston, D. L., Han, C. C.: Polym. Eng. Sci. 41, p. 77 (2001)10.1002/pen.10710Search in Google Scholar

335Schlatter, G., Serra, C., Bouquey, M., Muller, R., Terrise, J.: Polym. Eng. Sci. 42, p. 1965 (2002)10.1002/pen.11089Search in Google Scholar

336Serra, C., Schlatter, G., Bouquey, M., Muller, R., Terrisse, J.: Canadian J. Chem. Eng. 80, p. 1036 (2002)10.1002/cjce.5450800604Search in Google Scholar

337Bur, A. J., Gallant, F. M.: Polym. Eng. Sci. 31, p. 1365 (1991)10.1002/pen.760311902Search in Google Scholar

338Hu, G. H., Kadri, L., Picot, C.: Polym. Eng. Sci. 39, p. 930 (1999)10.1002/pen.11482Search in Google Scholar

339Zhang, X. M., Xu, Z. B., Feng, L. F., Song, X. B., Hu, G. H.: Polym. Eng. Sci. 46, p. 510 (2006)10.1002/pen.20495Search in Google Scholar

340Maier, C.: Polym. Eng. Sci. 36, p. 1502 (1996)10.1002/pen.10545Search in Google Scholar

341Kelly, A. L., Brown, E. C., Coates, P. D.: SPE ANTEC Techn. Papers61, p. 3306 (2003)Search in Google Scholar

342Haberstroh, E., Jakisch, L., Henbge, E., Schwarz, P.: Macromol. Mater. Eng. 287, p. 203 (2002)10.1002/1439-2054(20020301)287:3<203::AID-MAME203>3.0.CO;2-8Search in Google Scholar

343Key, A., Dawson, A. J., Rose, R. M., Coates, P. D.: SPE ANTEC Techn. Papers56, p. 920 (1998)Search in Google Scholar

344Kelly, A. L., Brown, E. C., Coates, P. D.: Plastics, Rubber and Composites34, p. 410 (2005)10.1179/174328905X72003Search in Google Scholar

345Bur, A. J., Wang, F. W., Thomas, C. L., Rose, J. L.: Polym. Eng. Sci. 34, p. 671 (1994)10.1002/pen.760340809Search in Google Scholar

346Bur, A. J., Vangel, M. G., Roth, S. C.: Polym. Eng. Sci. 41, p. 1380 (2001)10.1002/pen.10838Search in Google Scholar

347Bur, A. J., Roth, S. C.: Polym. Eng. Sci. 44, p. 898 (2004)10.1002/pen.20081Search in Google Scholar

348Fischer, D., Bayer, T., Eichhorn, K. J., Otto, M.: Fresenius J. Anal. Chem. 359, p. 74 (1997)10.1007/s002160050538Search in Google Scholar

349Fischer, D., Eichhorn, K. J.: Analusis26, p. 58 (1998)10.1051/analusis:199826040058Search in Google Scholar

350Fischer, D., Sahre, K., Abdelrhim, M., Voit, B., Sadhu, V. B., Pionteck, J., Komber, H., Hutschenreuter, J.: C.R. Chimie9, p. 1419 (2006)10.1016/j.crci.2006.06.006Search in Google Scholar

351George, G., Hynard, N., Cash, G., Rintoul, L., O'Shea, M.,: C.R. Chimie9, p. 1433 (2006)10.1016/j.crci.2006.07.005Search in Google Scholar

352Mijovic, J., Andjelic, S.: Macromolecules29, p. 239 (1996)10.1021/ma950550vSearch in Google Scholar

353Poisson, N., Lachenal, G., Sautereau, H.: Vibrational Spectroscopy12, p. 237 (1996)10.1016/0924-2031(96)00027-6Search in Google Scholar

354Hopewell, J. L., George, G. A., Hill, D. J. T.: Polymer41, p. 8221 (2000)10.1016/S0032-3861(00)00198-1Search in Google Scholar

355Dupuy, J., Benali, S., Maazouz, A., Lachenal, G., Bertrand, D.: Macromol. Symp. 184 p. 249 (2002)10.1002/1521-3900(200208)184:1<249::AID-MASY249>3.0.CO;2-5Search in Google Scholar

356Jakisch, L., Fischer, D., Stephan, M., Eichhorn, K. J.: Kunststoffe85, p. 1338 (1995)Search in Google Scholar

357Sasic, S., Kita, Y., Furukawa, T., Watari, M., Siesler, H. W., Ozaki, Y.: Analyst125, p. 2315 (2000)10.1039/b007112iSearch in Google Scholar

358Furukawa, T., Kita, Y., Sasao, S., Matsukawa, K., Watari, M., Sasic, S., Siesler, H. W., Ozaki, Y.: J. Near Infrared Spectrosc.10 p. 195 (2002)10.1255/jnirs.335Search in Google Scholar

359Barres, C., Bounor-Legaré, V., Mélis, F., Michel, A.: Polym. Eng. Sci. 46, p. 1613 (2006)10.1002/pen.20649Search in Google Scholar

360Jarukumjorn, K., Min, K.: SPE ANTEC Techn. Papers58, p. 2064 (2000)Search in Google Scholar

361Kiehl, C., Chu, L. L., Letz, K., Min, K.: Polym. Eng. Sci. 41, p. 1078 (2001)10.1002/pen.10808Search in Google Scholar

362Dealy, J. M.: Chem. Eng. Sci. 91, p. 62 (1984)10.1002/cjce.5450620114Search in Google Scholar

363Dealy, J. M., Broadhead, T. O.: Polym. Eng. Sci. 33, p. 1513 (1993)10.1002/pen.760332302Search in Google Scholar

364Kelly, A. L., Woodhead, M., Coates, P. D., Barnwell, D., Marin, K.: Polym. Process. 15, p. 355 (2000)10.3139/217.1612Search in Google Scholar

365Fritz, H. G., Stöhrer, B.: Int. Polym. Process. 1, p. 31 (1986)10.3139/217.860031Search in Google Scholar

366Pabedinskas, A., Cluett, W. R., Balke, S.: Polym. Eng. Sci. 29, p. 993 (1989)10.1002/pen.760291505Search in Google Scholar

367Dealy, J. M.: SPE ANTEC Techn. Papers58, p. 362 (2000)Search in Google Scholar

368Maia, J. M., Carneiro, O. S., Machado, A. V., Covas, J. P.: Appl. Rheol. 12, p. 18 (2002)10.1515/arh-2002-0002Search in Google Scholar

369Machado, A. V., Maia, J. M., Canevarolo, S. V., Covas, J. A.: J. Appl. Polym. Sci. 91, p. 2711 (2004)10.1002/app.13476Search in Google Scholar

370Covas, J. A., Carneiro, O. S., Costa, P., Machado, A. V., Maia, J. M.: Plastics Rubber and Composites33, p. 55 (2004)10.1179/146580104225018300Search in Google Scholar

371Chiu, S. H., Pong, S. H.: Polym. Degrad. Stabil. 64, p. 239 (1999)10.1016/S0141-3910(98)00195-5Search in Google Scholar

372Gendron, R., Sammut, P., Correa, A., Rohn, C. L.: SPE ANTEC Techn. Papers58, p. 984 (2000)Search in Google Scholar

373Xanthos, M., Grenci, J., Jacob, C., Dagli, S. S., Kotlar, H. K.: SPE ANTEC Techn. Papers, p.1946 (1994)Search in Google Scholar

374Piché, L., Gendron, R., Hamel, A., Sahnoune, A.: Plast. Eng. 55, p. 39 (1999)Search in Google Scholar

375França, D. R., Jen, C. K., Guyen, K. T., Gendron, R.: Polym. Eng. Sci. 40, p. 82 (2000)10.1002/pen.11141Search in Google Scholar

376Dogan, N., McCarthy, M. J., Powell, R. L.: Meas. Sci. Technol. 16, p. 1684 (2005)10.1088/0957-0233/16/8/021Search in Google Scholar

377Broadhead, T. O., Patterson, W. I., Dealy, J. M.: Polym Eng. Sci.36 p. 2840 (1996)10.1002/pen.10685Search in Google Scholar

378Broadhead, T. O., Dealy, J. M., Nelson, B. I.: Int. Polym. Process. 8, p. 104 (1993)10.3139/217.930104Search in Google Scholar

379Pong, S. H., Lu, C. P., Wang, M. C., Chiu, S. H.: J. Appl. Polym. Sci. 95, p. 280 (2005)10.1002/app.21275Search in Google Scholar

380Menges, G., Michaeli, W., Kunze, B., Haupt, M.: Kunstoffe78, p. 936 (1988)Search in Google Scholar

381Pabedinskas, A., Cluett, W. R., Balke, S. T.: Polym. Eng. Sci. 31, p. 365 (1991)10.1002/pen.760310508Search in Google Scholar

382Pabedinskas, A., Cluett, W. R.: Polym. Eng. Sci. 34, p. 585 (1994)10.1002/pen.760340707Search in Google Scholar

383Tang, H., Wrobel, L. C., Fan, Z.: Modelling Simul. Mater. Sci. Eng. 11, p. 771 (2003)10.1088/0965-0393/11/5/305Search in Google Scholar

384Ganzeveld, K. J., Janssen, L. P. B. M.: Polym. Eng. Sci. 30, p. 1529 (1990)10.1002/pen.760302307Search in Google Scholar

385Van der Groot, A. J., Klaassens, S. A., Janssen, L. P. B. M.: Polym. Eng. Sci. 37, p. 519 (1997)10.1002/pen.11695Search in Google Scholar

386Janssen, L. P. B. M.: Polym. Eng. Sci. 38, p. 2010 (1998)10.1002/pen.10370Search in Google Scholar

387Janssen, L. P. B. M., Rozendal, R. F., Hoogstraten, H. W., Cioffi, M.: Int. Polym. Process. 16, p. 263 (2001)10.3139/217.1651Search in Google Scholar

388Janssen, L. P. B. M., Rozendal, R. F., Hoogstraten, H. W., Cioffi, M.: Int. Polym. Process. 18, p. 277 (2003)10.3139/217.1748Search in Google Scholar

389Vargas, R. O., Vivaldo-Lima, E., Manero, O.: Polym.-Plas. Technol. Eng. 45, p. 9 (2006)10.1080/03602550500371471Search in Google Scholar

390Puaux, J. P., Cassagnau, P., Bozga, G., Nagy, I.: Chem. Eng. Process45, p. 481 (2006)10.1016/j.cep.2005.11.006Search in Google Scholar

391Thompson, M. R., Hrymak, A. N., Hamielec, A. E.: Adv. Polym. Technol. 14, p. 87 (1995)10.1002/adv.1995.060140201Search in Google Scholar

392Tayeb, J., Vergnes, B., Della Valle, G.: J. Food Sci. 54, p. 1047 (1989)10.1111/j.1365-2621.1989.tb07941.xSearch in Google Scholar

393Vergnes, B., Della Valle, G., Delamare, L.: Polym. Eng. Sci. 38, p. 1781 (1998)10.1002/pen.10348Search in Google Scholar

394Vergnes, B., Berzin, F.: C.R. Chimie9, p. 1409 (2006)10.1016/j.crci.2006.07.006Search in Google Scholar

395Vergnes, B., Berzin, F.: Plast. Rub. Compos. 33, p. 409 (2004)10.1179/174328904X24916Search in Google Scholar

396De Loor, A., Cassagnau, P., Michel, A., Delamare, L., Vergnes, B.: Polym. Process. 11, p. 139 (1996)10.3139/217.960139Search in Google Scholar

397Berzin, F., Vergnes, B., Duffosse, P., Delamare, L.: Polym. Eng. Sci. 40, p. 344 (2000)10.1002/pen.11168Search in Google Scholar

398Berzin, F., Vergnes, B., Canevarolo, S. V., Machado, A. V., Covas, J. A.: J. Appl. Polym. Sci. 99, p. 2082 (2006)10.1002/app.22729Search in Google Scholar

399Zagal, A., Vivaldo-Lima, E., Manero, O.: Ind. Eng. Chem. Res. 44, p. 9805 (2005)10.1021/ie050585bSearch in Google Scholar

400Michaeli, W., Grefenstein, A.: Int. Polym. Sci. 11, p. 121 (1996)10.3139/217.960121Search in Google Scholar

401Wu, L., Jia, Y., Sun, S., Zhang, G., Zhao, G., An, L.: J. Appl. Polym. Sci. 103, p. 2331 (2007)10.1002/app.24815Search in Google Scholar

402Gaspar-Cunha, A., Poulesquen, A., Vergnes, B., Covas, J. A.: Polym. Process. 17, p. 201 (2002)10.3139/217.1701Search in Google Scholar

403Gaspar-Cunha, A., Covas, J. A., Vergnes, B.: Polym. Eng. Sci. 45, p. 1159 (2005)10.1002/pen.20391Search in Google Scholar

404White, J. L., Chen, Z.: Polym. Eng. Sci. 34, p. 229 (1994)10.1002/pen.760340309Search in Google Scholar

405White, J. L., Kim, B. J., Bawiskar, S., Keum, J. M.: Polym.-Plast. Technol. Eng. 40, p. 385 (2001)10.1081/PPT-100002065Search in Google Scholar

406Kye, H., White, J. L.: Intern. Polym. Process. 11, p. 129 (1996)Search in Google Scholar

407Kim, B. J., White, J. L.: Polym. Eng. Sci. 37, p. 576 (1997)10.1002/pen.11701Search in Google Scholar

408Keum, J., White, J. L.: J. Vinyl&Additive Technol. 11, p. 143 (2005)10.1002/vnl.20053Search in Google Scholar

409White, J. L., Keum, J., Jung, H., Ban, K., Bumm, S.: Polym-Plast. Techn. Eng. 45, p. 539 (2006)10.1080/03602550600554091Search in Google Scholar

410Strutt, D., Tzoganakis, C., Duever, T. A.: Adv. Polym. Technol. 19, p. 22 (2000)10.1002/(SICI)1098-2329(20000117)19:1<22::AID-ADV3>3.0.CO;2-HSearch in Google Scholar

411Zhu, L., Narh, K. A., Hyun, K. S.: Adv. Polym. Technol.24 p. 183 (2005)10.1002/adv.20041Search in Google Scholar

412Zhu, L., Narh, K. A., Hyun, K. S.: Inter. J. Heat and Mass Transfer48, p. 3411 (2005)10.1016/j.ijheatmasstransfer.2004.12.049Search in Google Scholar

413Albalak, R. J.: Polymer Devolatization, Marcel Decker, New York (1996)Search in Google Scholar

414Tadmor, Z., Gogos, G.: Principles of Polymer Processing, Devolatization. Wiley&Sons, Wiley-Interscience, New York (2006)Search in Google Scholar

Received: 2007-1-19
Accepted: 2007-4-25
Published Online: 2013-03-26
Published in Print: 2007-07-01

© 2007, Carl Hanser Verlag, Munich

Downloaded on 14.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.2032/html
Scroll to top button