Home Prediction of Residence Time Distribution in EZ and KE Element of a Ko-Kneader by using CFD Method
Article
Licensed
Unlicensed Requires Authentication

Prediction of Residence Time Distribution in EZ and KE Element of a Ko-Kneader by using CFD Method

  • M. Mehranpour , H. Nazokdast and B. Dabir
Published/Copyright: June 3, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 18 Issue 4

Abstract

Residence time distribution is among the important parameters of the Buss Ko-Kneader which allows one to better understand the flow conditions inside the system and to get information on mixing efficiency. However it has always been a difficult task to predict the RTD of complex geometries such as Buss elements.

The aim of the present work was to estimate the residence time distribution in EZ and KE element of the Buss Ko-Kneader by utilizing an elemental tracing method performed on the flow fields in the same elements which were analysized by CFD method. The effects of rotating and reciprocating motions of the screw have been taken into account in three dimensional flow analysis. It was demonstrated that these results can provide valuable information on mixing performance of these two elements.

* Mail address: H. Nazokdast, Dept. of Polym. Eng., Amir kabir University of Technology, P.O. Box 15875-4413, Teheran, Iran
Received: 2003-5-12
Accepted: 2003-7-1
Published Online: 2013-06-03
Published in Print: 2003-12-01

© 2003, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Fourth of a Series: Pioneering Polymer Industry Developments: The First Continuous Kneading Machines
  5. Screw Extrusion
  6. Prediction of Residence Time Distribution in EZ and KE Element of a Ko-Kneader by using CFD Method
  7. Computational Study of Velocity Field in the KE Element of a Modular Ko-Kneader with CFD Method
  8. Optimization of Sweet Bread Dough Processing Conditions by Twin Screw Extrusion
  9. Experimental Development of Processing Technology for Yuba-like Films Using Twin Screw Extrusion
  10. Die Extrusion
  11. Flow Analyses in a Spiral Mandrel Die Assuming Wall Slip
  12. Effect of Elongational Viscosity on the Flow in a Flat Die
  13. Measuring Polymer Melt Density and Viscosity in Real-time during Extrusion Processes using Ultrasound Sensors Fusion
  14. Film
  15. Scale-up Rule for Double Bubble Tubular Process of PA6 Film
  16. Molding
  17. Analysis of the Morphological Development of PBT/ABS Blends during the Twin Screw Extrusion and Injection Molding Processes
  18. Investigation of the Mechanical Properties and Chemical Resistance of PC/PBT/Impact Modifier Blends
  19. Structure Development in Injection Molding of Isotactic Polypropylene, its Blends, Compounds and Dynamic Vulcanizates
  20. The Flow Behavior of Core Material and Breakthrough Phenomenon in Sandwich Injection Molding
  21. The Flow Behavior of Core Material and Breakthrough Phenomenon in Sandwich Injection Molding
  22. PPS News
  23. PPS News
https://doi.org/10.3139/217.1757

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Fourth of a Series: Pioneering Polymer Industry Developments: The First Continuous Kneading Machines
  5. Screw Extrusion
  6. Prediction of Residence Time Distribution in EZ and KE Element of a Ko-Kneader by using CFD Method
  7. Computational Study of Velocity Field in the KE Element of a Modular Ko-Kneader with CFD Method
  8. Optimization of Sweet Bread Dough Processing Conditions by Twin Screw Extrusion
  9. Experimental Development of Processing Technology for Yuba-like Films Using Twin Screw Extrusion
  10. Die Extrusion
  11. Flow Analyses in a Spiral Mandrel Die Assuming Wall Slip
  12. Effect of Elongational Viscosity on the Flow in a Flat Die
  13. Measuring Polymer Melt Density and Viscosity in Real-time during Extrusion Processes using Ultrasound Sensors Fusion
  14. Film
  15. Scale-up Rule for Double Bubble Tubular Process of PA6 Film
  16. Molding
  17. Analysis of the Morphological Development of PBT/ABS Blends during the Twin Screw Extrusion and Injection Molding Processes
  18. Investigation of the Mechanical Properties and Chemical Resistance of PC/PBT/Impact Modifier Blends
  19. Structure Development in Injection Molding of Isotactic Polypropylene, its Blends, Compounds and Dynamic Vulcanizates
  20. The Flow Behavior of Core Material and Breakthrough Phenomenon in Sandwich Injection Molding
  21. The Flow Behavior of Core Material and Breakthrough Phenomenon in Sandwich Injection Molding
  22. PPS News
  23. PPS News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 30.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/217.1757/pdf?lang=en
Scroll to top button