Article
Licensed
Unlicensed Requires Authentication

Contents

Published/Copyright: April 6, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 27 Issue 2

Published Online: 2013-04-06
Published in Print: 2012-05-01

© 2012, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review Papers
  4. Rheology and Processing of Tetrafluoroethylene/Hexafluoropropylene Copolymers
  5. Regular Contributed Articles
  6. Foaming Behavior and Mechanical Properties of Microcellular PP/SiO2 Composites
  7. Preparation and Properties of EPDM/NBR/Organoclay Nanocomposites
  8. Mechanical and Morphological Properties of Flax Fiber Reinforced High Density Polyethylene/Recycled Rubber Composites
  9. Global/Local Analysis of Filling Behavior during Injection Molding for a Large Scale Plate with Micro Patterns
  10. Using Multi-objective Evolutionary Algorithms for Optimization of the Cooling System in Polymer Injection Molding
  11. Parameters Affecting the Ink Wash-off in In-mold Decoration of Injection Molded Parts
  12. Improving the Processability of Water-soluble Films Based on Filled Thermoplastic Polyvinyl Alcohol
  13. Molecular Orientation Behavior of Isotactic Polypropylene Films under Uniaxial and Biaxial Deformation at Elevated Temperatures
  14. A Study of Fiber Breakage during Compounding in a Buss Kneader
  15. Peel Adhesive Properties of Polymer Laminates Composed of Polyethylenes and Polypropylenes
  16. Tubing Extrusion of a Fluoropolymer Melt
  17. Functionalization of Polystyrene with Cyclic Anhydrides and their Spectroscopic, Adhesive and Corrosive Characterizations
  18. PPS-News
  19. PPS News
  20. Seikei Kakou Abstracts
  21. Seikei-Kakou Abstracts
https://doi.org/10.3139/217.1222

Articles in the same Issue

  1. Contents
  2. Contents
  3. Review Papers
  4. Rheology and Processing of Tetrafluoroethylene/Hexafluoropropylene Copolymers
  5. Regular Contributed Articles
  6. Foaming Behavior and Mechanical Properties of Microcellular PP/SiO2 Composites
  7. Preparation and Properties of EPDM/NBR/Organoclay Nanocomposites
  8. Mechanical and Morphological Properties of Flax Fiber Reinforced High Density Polyethylene/Recycled Rubber Composites
  9. Global/Local Analysis of Filling Behavior during Injection Molding for a Large Scale Plate with Micro Patterns
  10. Using Multi-objective Evolutionary Algorithms for Optimization of the Cooling System in Polymer Injection Molding
  11. Parameters Affecting the Ink Wash-off in In-mold Decoration of Injection Molded Parts
  12. Improving the Processability of Water-soluble Films Based on Filled Thermoplastic Polyvinyl Alcohol
  13. Molecular Orientation Behavior of Isotactic Polypropylene Films under Uniaxial and Biaxial Deformation at Elevated Temperatures
  14. A Study of Fiber Breakage during Compounding in a Buss Kneader
  15. Peel Adhesive Properties of Polymer Laminates Composed of Polyethylenes and Polypropylenes
  16. Tubing Extrusion of a Fluoropolymer Melt
  17. Functionalization of Polystyrene with Cyclic Anhydrides and their Spectroscopic, Adhesive and Corrosive Characterizations
  18. PPS-News
  19. PPS News
  20. Seikei Kakou Abstracts
  21. Seikei-Kakou Abstracts
Downloaded on 12.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.1222/html
Scroll to top button