Contents

Articles in the same Issue

1. Contents
2. Contents
3. Regular Contributed Articles
4. Investigation of the Thickening Efficiency of HEUR on the Behavior of Two Different Latex Types
5. Optimization of the Thickness of PET Bottles during Stretch Blow Molding by Using a Mesh-free (Numerical) Method
6. An Experimental Setup to Measure the Transient Temperature Profiles in Water Assisted Injection Molding
7. Experimental Investigation and Flow Modeling of Slippage Induced by Additives in Polyolefins in a Modular Co-rotating Twin Screw Extruder
8. In-mold Melt Front Rate Control Using a Capacitive Transducer in Injection Molding
9. Structural and Rheological Properties as a Function of Mixing Energy for Polymer/Layered Silicate Nanocomposites
10. Study on Kneading and Molding of PP/TiO₂ Nanocomposite
11. Sustainable Biocomposites from Rice Flour and Sisal Fiber: Effect of Fiber Loading, Length and Alkali Treatment
12. On-line Measurement Studies on Orientation Development and Characteristic Short-Period Diameter Fluctuation in High Speed In-line Drawing of Poly(ethylene terephthalate) Fiber
13. Micro Replication by Injection-Compression Molding
14. Utilizing Processing Parameters for Evaluating Polymer Viscosity during Plastication in Injection Molding
15. PPS-News
16. PPS News
17. Seikei Kakou Abstracts
18. Seikei-Kakou Abstracts