Home Physical Sciences PPS News
Article
Licensed
Unlicensed Requires Authentication

PPS News

Published/Copyright: March 1, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 24 Issue 1

Published Online: 2013-03-01
Published in Print: 2009-03-01

© 2009, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Study on the Effects of Temperature and Compatibilizer on the Interfacial Tension of PP/PA6 and PP/PET Pairs
  5. Rheological Properties of Chlorinated Polyethylene Blended with Low-cost Grade Natural Rubber
  6. Injection Molding of Long Fiber Reinforced Thermoplastic Composites
  7. Analytical Model for the Throughput and Drive Power Calculation in the Melting Section of Single Screw Plasticizing Units considering Wall-Slippage
  8. Analytical Model for the Throughput and Drive Power Calculation in the Melting Section of Single Screw Plasticizing Units considering Wall-Slippage
  9. Sparse Long-chain Branching's Effect on the Film-casting Behavior of PE
  10. Simulation Study on Optimization of Injection Molding Process for Thin-shell Plastic Parts via the Taguchi Method and Grey Relational Analysis
  11. Effects of Extrusion Variables on Organoclay Intercalation and Properties of Tapioca Starch-Poly(Lactic Acid) Nanocomposite Foams
  12. Extrusion Scale-up: An Optimization-based Methodology
  13. Phase Separation under Shear in Liquid Crystalline Polymer/Polycarbonate Blends
  14. PPS News
  15. PPS News
  16. Seikei-Kakou Abstracts
  17. Seikei-Kakou Abstracts
  18. Polímeros: Ciência E Tecnologia – Abstracts
  19. Polímeros: Ciência E Tecnologia – Abstracts
https://doi.org/10.3139/217.0914

Articles in the same Issue

  1. Contents
  2. Contents
  3. Regular Contributed Articles
  4. Study on the Effects of Temperature and Compatibilizer on the Interfacial Tension of PP/PA6 and PP/PET Pairs
  5. Rheological Properties of Chlorinated Polyethylene Blended with Low-cost Grade Natural Rubber
  6. Injection Molding of Long Fiber Reinforced Thermoplastic Composites
  7. Analytical Model for the Throughput and Drive Power Calculation in the Melting Section of Single Screw Plasticizing Units considering Wall-Slippage
  8. Analytical Model for the Throughput and Drive Power Calculation in the Melting Section of Single Screw Plasticizing Units considering Wall-Slippage
  9. Sparse Long-chain Branching's Effect on the Film-casting Behavior of PE
  10. Simulation Study on Optimization of Injection Molding Process for Thin-shell Plastic Parts via the Taguchi Method and Grey Relational Analysis
  11. Effects of Extrusion Variables on Organoclay Intercalation and Properties of Tapioca Starch-Poly(Lactic Acid) Nanocomposite Foams
  12. Extrusion Scale-up: An Optimization-based Methodology
  13. Phase Separation under Shear in Liquid Crystalline Polymer/Polycarbonate Blends
  14. PPS News
  15. PPS News
  16. Seikei-Kakou Abstracts
  17. Seikei-Kakou Abstracts
  18. Polímeros: Ciência E Tecnologia – Abstracts
  19. Polímeros: Ciência E Tecnologia – Abstracts
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 14.2.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.0914/html
Scroll to top button