Article
Licensed
Unlicensed Requires Authentication

Thirteenth of a Series: The First and Best Industrial Polymer Rheologist — Melvin Mooney (1893–1968)

Published/Copyright: June 5, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Polymer Processing
From the journal International Polymer Processing Volume 17 Issue 2

Published Online: 2013-06-05
Published in Print: 2002-05-01

© 2002, Carl Hanser Verlag, Munich

Articles in the same Issue

  1. Editorial
  2. Thirteenth of a Series: The First and Best Industrial Polymer Rheologist — Melvin Mooney (1893–1968)
  3. Single Extrusion
  4. A New Method for Simulating the Conveying of Solid Pellets
  5. A 3D Numerical Study of Fluid Flow and Heat Transfer in a Single Screw Extruder
  6. Pressure/Throughput Behavior of a Single-screw Plasticising Unit in Consideration of Wall Slippage
  7. Computational Study of the Velocity Field in the Conveying Element of a Ko-kneader with CFD Method
  8. Reactive Extrusion
  9. Modification of Polyolefin with Maleic Anhydride/Styrene and Methyl Methacrylate/Styrene
  10. Fibers and Films
  11. Direct Measurement of Fiber Temperature in the Continuous Drawing Process of PET Fiber Heated by CO2 Laser Radiation
  12. Injection Molding
  13. Evaluation of a Model Describing the Advancing Flow Front in Injection Moulding
  14. Process Design for Reducing the Warpage in Thin-walled Injection Molding
  15. Composites
  16. Preferable Filament Diameter Ratios of Hybrid Yarn Components for Optimized Longfiber Reinforced Thermoplastics
  17. Squeeze Flow Rheology of Glass Mat Thermoplastic (GMT) in Large Tools and at High Closing Velocities
  18. Analysis of Heat Flu from Molten Polymers to Molds in Injection Molding Processes
https://doi.org/10.3139/217.0202

Articles in the same Issue

  1. Editorial
  2. Thirteenth of a Series: The First and Best Industrial Polymer Rheologist — Melvin Mooney (1893–1968)
  3. Single Extrusion
  4. A New Method for Simulating the Conveying of Solid Pellets
  5. A 3D Numerical Study of Fluid Flow and Heat Transfer in a Single Screw Extruder
  6. Pressure/Throughput Behavior of a Single-screw Plasticising Unit in Consideration of Wall Slippage
  7. Computational Study of the Velocity Field in the Conveying Element of a Ko-kneader with CFD Method
  8. Reactive Extrusion
  9. Modification of Polyolefin with Maleic Anhydride/Styrene and Methyl Methacrylate/Styrene
  10. Fibers and Films
  11. Direct Measurement of Fiber Temperature in the Continuous Drawing Process of PET Fiber Heated by CO2 Laser Radiation
  12. Injection Molding
  13. Evaluation of a Model Describing the Advancing Flow Front in Injection Moulding
  14. Process Design for Reducing the Warpage in Thin-walled Injection Molding
  15. Composites
  16. Preferable Filament Diameter Ratios of Hybrid Yarn Components for Optimized Longfiber Reinforced Thermoplastics
  17. Squeeze Flow Rheology of Glass Mat Thermoplastic (GMT) in Large Tools and at High Closing Velocities
  18. Analysis of Heat Flu from Molten Polymers to Molds in Injection Molding Processes
Downloaded on 12.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/217.0202/html
Scroll to top button