Influence of Different Etchants on the Representation of Microstructures in Nickel Alloys
-
M. Speicher
Abstract
This work presents a comparison of selected nickel alloys of the same condition which were treated by means of specifically chosen etching techniques. Microstructures on microscope images of wrought Alloy 617, a casting variant of Alloy 625, a polycrystalline casting alloy IN-738 LC, as well as of a monocrystalline superalloy CM 247 LC SX, respectively, are juxtaposed and evaluated. This approach allows for a comprehensive optical microscopy characterization of the characteristic microstructural features.
Kurzfassung
In dieser Arbeit werden jeweils gleiche Zustände ausgewählter Nickellegierungen, die mit gezielt gewählten Ätzverfahren behandelt wurden, vergleichend dargestellt. In lichtoptischen Aufnahmen wird die Mikrostruktur der Knetlegierung Alloy 617, einer Gussvariante von Alloy 625, einer polykristallinen Gusslegierung IN-738 LC sowie einer einkristallinen Superlegierung CM 247 LC SX gegenübergestellt und bewertet. Somit wird eine vollständige lichtoptische Charakterisierung der kennzeichnenden Gefügemerkmale möglich.
References / Literatur
[1] Klein, T. et al.: Abschlussbericht zum BMWi-Forschungsvorhaben COORETEC-DT3, Förderkennzeichen 0327754B, 2011Suche in Google Scholar
[2] Speicher, M.; Klenk, A.; Maile, K.; Roos, E.: Advanced Materials Research278 (2011), 241–24610.4028/www.scientific.net/AMR.278.241Suche in Google Scholar
[3] Nicofer 6020 h Mo- alloy 625, Werkstoffdatenblatt-Nr. 4118, ThyssenKrupp VDM, 2007Suche in Google Scholar
[4] Reed, R. C.: The Superalloys-Fundamentals and Applications, Cambridge Univ. Press, 200610.1017/CBO9780511541285Suche in Google Scholar
[5] Wu, Q.: Dissertation, University of Cincinnati, 2006, 100Suche in Google Scholar
[6] Ferrer, L., Pieraggi, B., Uginet, J. F.: Materials Science Forum, 113–115 (1993), 417–42210.4028/www.scientific.net/MSF.113-115.417Suche in Google Scholar
[7] Heubner, U. et al.: Werkstoffe und Korrosion, 43 (1992), 181–19010.1002/maco.19920430502Suche in Google Scholar
[8] DuPont, John N. et al.: Welding Metallurgy and Weldability of Nickel-base Alloys, Willey-Verlag, 200910.1002/9780470500262Suche in Google Scholar
[9] Vander Voort, G. F.: Metallography and Microstructures of Heat-Resistant Alloys, ASM Handbook, Vol. 9: Metallography and Microstructures, 2004, 820 ff.Suche in Google Scholar
© 2016, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents/Inhalt
- Contents
- Editorial
- Editorial
- Technical Contributions/Fachbeiträge
- Surface Preserving Targeted Preparation using Focused Ion Beam Demonstrated by the Example of Oxide layers on Ni-Ti Alloys
- Influence of Different Etchants on the Representation of Microstructures in Nickel Alloys
- Ion Beam Processing in the Sample Preparation for the Analysis of Ductile Damage in Deep Drawing Steels
- Metallurgical Failure Investigation of HCF Cracking in a Premix Fuel Oil Manifold of a Heavy-duty Combined Cycle Gas Turbine Engine
- Meeting Diary/Veranstaltungskalender
- Meeting Diary
Artikel in diesem Heft
- Contents/Inhalt
- Contents
- Editorial
- Editorial
- Technical Contributions/Fachbeiträge
- Surface Preserving Targeted Preparation using Focused Ion Beam Demonstrated by the Example of Oxide layers on Ni-Ti Alloys
- Influence of Different Etchants on the Representation of Microstructures in Nickel Alloys
- Ion Beam Processing in the Sample Preparation for the Analysis of Ductile Damage in Deep Drawing Steels
- Metallurgical Failure Investigation of HCF Cracking in a Premix Fuel Oil Manifold of a Heavy-duty Combined Cycle Gas Turbine Engine
- Meeting Diary/Veranstaltungskalender
- Meeting Diary
