Microstructural Characterization of Open-Pore Metal Foams of Pure Metals

References / Literatur

[1] Han, X.-H.; et al.: A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks, Heat Transfer Eng.33 (2012) 12, S. 1–20Search in Google Scholar

[2] Matz, A. M.;Müller, D. W.;Jost, N.: Morphological and thermal characterization of Al-based open-pore cellular structures, Proc. Cellular Mater. (2. Cell-MAT Dresden), Conventus, Jena, 2012, Art. G48 (CD)Search in Google Scholar

[3] Singh, R.; et al.: Hierarchically structured titanium foams for tissue scaffold applications, Acta Biomater.6 (2010) 12, S. 4596–460410.1016/j.actbio.2010.06.027Search in Google Scholar

[4] Müller, D. W.;Matz, A. M.;Jost, N.: Casting open porous Ti foam suitable for medical applications, Bioinsp. Biomim. Nanobiomat.2 (2013) 2, S. 76–83Search in Google Scholar

[5] Ashby, M. F.: The Mechanical Properties of Cellular Solids, Metall. Trans. A14 (1983) 9, S. 1755–176910.1007/BF02645546Search in Google Scholar

[6] Smith, B. H.; et al.: Steel foam for structures: A review of applications, manufacturing and material properties, J. Constr. Steel Res.71 (2012) 4, S. 1–1010.1016/j.jcsr.2011.10.028Search in Google Scholar

[7] Banhart, J.: Light-Metal Foams: History of Innovation and Technological Challenges, Prog. Mater. Sci.46 (2001) 6, S. 559–632Search in Google Scholar

[8] Ho, C. Y.;Powell, R. W.;Liley, P. E.: Thermal Conductivity of the Elements: A Comprehensive Review, J. Phys. Chem. Ref. Data3 (1974) 1, S. 756–796Search in Google Scholar

[9] Dinsdale, A. T.: SGTE data for pure elements, Calphad15 (1991) 4, S. 317–42510.1016/0364-5916(91)90030-NSearch in Google Scholar

[10] Wang, L. C.;Wang, F.: Preparation of the open pore aluminum foams using investment casting process, Acta Metall. Sin. (Engl. Lett.)14 (2001) 1, S. 27–32Search in Google Scholar

[11] Yamada, Y. et al.: Processing of an open-cellular AZ91 magnesium alloy with a low density of 0.05 g/cm³, J. Mater. Sci. Lett.18 (1999) 18, S. 1477–148010.1023/A:1006677930532Search in Google Scholar

[12] Matz, A. M.; et al.: Mesostructural design and manufacturing of open-pore metal foams by investment casting, Adv. Mater. Sci. Eng.2014 (2014), Art. ID 421729, S. 1–9Search in Google Scholar

[13] Petzow, G.;Carle, V.: Metallographisches, Keramographisches, Plastographisches Ätzen, 6. Aufl., Gebrüder Bornträger Verlag, Berlin, 2006Search in Google Scholar

[14] Schumann, H.;Oettel, H.: Metallografie, 14. Aufl., Wiley Verlag, Weinheim, 2005Search in Google Scholar

[15] Beckert, M.;Klemm, H.: Handbuch der metallographischen Ätzverfahren, 2. Aufl., Deutscher Verlag für Grundstoffindustrie, Leipzig, 1966Search in Google Scholar

[16] Weidmann, E.;Guesnier, A.: Metallografische Präparation von Kupfer und Kupferlegierungen,StruersA/S (Hrsg.), Ballerup, 2007 – FirmenschriftSearch in Google Scholar

[17] Bargel, H.-J.;Schulze, G. (Hrsg.): Werkstoffkunde, 9. Aufl., Springer, Berlin, 200510.1007/3-540-29250-0Search in Google Scholar

[18] FritzA.H.;SchulzeG. (Hrsg.): Fertigungstechnik, 8. Aufl., Springer, Berlin, 200810.1007/978-3-540-76696-4Search in Google Scholar

[19] Belov, N. A.;Aksenov, A. A.;Eskin, D. G.: Iron in Aluminium Alloys – Impurity and Alloying Element, Taylor & Francis, London, 200210.1201/9781482265019Search in Google Scholar

[20] Hatch, J. E. (Hrsg.): Aluminium: Properties and Physical Metallurgy, ASM International, Metals Park, 1984Search in Google Scholar

[21] Ilschner, B.;Singer, R. F.: Werkstoffwissenschaften und Fertigungstechnik, 5. Aufl., Springer, Heidelberg, 201010.1007/978-3-642-01734-6Search in Google Scholar

[22] Porter, D. A.;Easterling, K. E.;Sherif, M. Y.: Phase Transformations in Metals and Alloys, 3. Aufl., CRC Press, Boca Raton, 200910.1201/9781439883570Search in Google Scholar