Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Surface and Bulk Characterization of Metallic Powders

Published/Copyright: December 9, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Practical Metallography
From the journal Practical Metallography Volume 50 Issue 12

Abstract

Metallic components manufactured via the Powder Metallurgy route require more attention in terms of adjusting the process parameters in order to control the chemistry during production. Therefore the first step towards a robust production through the Powder Metallurgy route is the characterization of the chemical features of the metal powder both on the surface and in the bulk. This review is an assortment of examples of characterization studies used for investigating different features observed in metallic powders.

Kurzfassung

Mittels Pulvermetallurgie gefertigte metallische Komponenten erfordern zur Kontrolle des Chemismus während der Herstellung mehr Aufmerksamkeit bei der Anpassung der Prozessparameter. Daher ist der erste Schritt hin zu einer robusten Fertigung mit Hilfe der Pulvermetallurgie die Charakterisierung der chemischen Eigenschaften des Metallpulvers sowohl an der Oberfläche als auch im Bulk. Dieser Review bietet eine Auswahl an Beispielen von zur Untersuchung verschiedener bei Metallpulvern beobachteter Eigenschaften durchgeführten Charakterisierungsstudien.

References / Literatur

[1] SchattW.; E.P.M. Association, and WietersK.P.: Powder metallurgy: processing and materials. European Powder Metallurgy Association, 1997.Search in Google Scholar

[2] ŠalakA.: Ferrous powder metallurgy. Cambridge International Science Pub., 1995.Search in Google Scholar

[3] DanningerH.; GierlC.: “New Alloying Systems for Ferrous Powder Metallurgy Precision Parts” vol. 40, pp. 33–46, 2008.10.2298/SOS0801033DSearch in Google Scholar

[4] KarlssonH.; NyborgL.; BergS.: “Surface chemical analysis of prealloyed water atomised steel powder,” Powder Metallurgy, vol. 48, no. 1. pp. 51–58. 10.1179/0032589005X37675Search in Google Scholar

[5] NyborgL.; NorellM.; and OlefiordI.: “Surface Studies of Powder Metallurgical Stainless Steel,” vol. 19, pp. 607–614, 1992.10.1002/sia.7401901113Search in Google Scholar

[6] NyborgL.; NylundA.; OlefjordI.: “Thickness determination of oxide layers on spherically-shaped metal powders by ESCA,” Surf. Interface Anal., vol. 12, no. 2, pp. 110–114, 1988. 10.1002/sia.740120209Search in Google Scholar

[7] OlefjordI.; NyborgL.: “Surface Analysis of Gas Atomized Ferritic Steel Powder,” Powder Metallurgy, vol. 28, no. 4. pp. 237–243.10.1179/pom.1985.28.4.237Search in Google Scholar

[8] ChasoglouD.; HryhaE.; NorellM.; NyborgL.: “Characterization of surface oxides on water-atomized steel powder by XPS/AES depth profiling and nano-scale lateral surface analysis,” Appl. Surf. Sci., vol. 268, pp. 496–506, Mar. 2013. 10.1016/j.apsusc.2012.12.155Search in Google Scholar

[9] NeikovO.D.; LotskoD.V.; GopienkoV.G.: “Chapter 1 – Powder characterization and testing BT – Handbook of Non-Ferrous Metal Powders,” Oxford: Elsevier, 2009, pp. 5–44. 10.1016/B978-1-85617-422-0.00001-XSearch in Google Scholar

[10] FieldR.; FraserH.: “Microstructural observations of metal powders using analytical electron microscopy,” Metall. Mater. Trans. A, vol. 9, no. 1, pp. 131–134.10.1007/BF02647183Search in Google Scholar

[11] TunbergT.; NyborgL.: “Surface Reactions During Water Atomisation and Sintering of Austenitic Stainless Steel Powder,” Powder Metallurgy, vol. 38, no. 2. pp. 120–130.10.1179/pom.1995.38.2.120Search in Google Scholar

Received: 2013-9-29
Accepted: 2013-9-29
Published Online: 2013-12-09
Published in Print: 2013-12-16

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. Characterization of Surface Defects on Pulse-Electrodeposited Nickel Tubes
  7. Surface and Bulk Characterization of Metallic Powders
  8. Recent Applications of Scanning Electron Microscopy
  9. Failure Investigation of an Airline Engine Failure During Take Off
  10. Meeting Diary/Veranstaltungskalender
  11. Meeting Diary
https://doi.org/10.3139/147.110271

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. Characterization of Surface Defects on Pulse-Electrodeposited Nickel Tubes
  7. Surface and Bulk Characterization of Metallic Powders
  8. Recent Applications of Scanning Electron Microscopy
  9. Failure Investigation of an Airline Engine Failure During Take Off
  10. Meeting Diary/Veranstaltungskalender
  11. Meeting Diary
Downloaded on 23.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/147.110271/html
Scroll to top button