Article
Licensed
Unlicensed Requires Authentication

Contents

Published/Copyright: March 6, 2018
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Practical Metallography
From the journal Practical Metallography Volume 55 Issue 3

Published Online: 2018-03-06
Published in Print: 2018-03-15

© 2018, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. Heat Treatment and Microstructural Contrasting on Low-Alloy Copper-Based Alloys
  7. Analysis, Modeling and Simulation of Tomographic Image Data for the 3D Microstructure of Electrode Material in Lithium-Ion Batteries
  8. Detailed Metallographic Analysis of the Surface Layer Structure of Carbonitrided Case-Hardening Steels after Varied Tempering Treatments
  9. Fretting Fatigue Cracking of a Center Guide Bolt Supporting the Combustion Chamber in a Heavy-duty Gas Turbine Engine
  10. Meeting Diary/Veranstaltungskalender
  11. Meeting Diary
https://doi.org/10.3139/147.018032

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. Heat Treatment and Microstructural Contrasting on Low-Alloy Copper-Based Alloys
  7. Analysis, Modeling and Simulation of Tomographic Image Data for the 3D Microstructure of Electrode Material in Lithium-Ion Batteries
  8. Detailed Metallographic Analysis of the Surface Layer Structure of Carbonitrided Case-Hardening Steels after Varied Tempering Treatments
  9. Fretting Fatigue Cracking of a Center Guide Bolt Supporting the Combustion Chamber in a Heavy-duty Gas Turbine Engine
  10. Meeting Diary/Veranstaltungskalender
  11. Meeting Diary
Downloaded on 14.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/147.018032/html
Scroll to top button