Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Meeting Diary

Published/Copyright: October 12, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Practical Metallography
From the journal Practical Metallography Volume 50 Issue 10

Published Online: 2013-10-12
Published in Print: 2013-10-11

© 2013, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. Microstructure Evolution and Mechanical Properties Investigation of Al-6 %Cu Alloy Laser and GTA Welds
  7. Preparation and Microstructural Characterisation of Metal Injection Moulded Powder Metallurgical Components (MIM) in the Green and Sintered Conditions
  8. Quantitative Analysis of Microstructure in Low Carbon Steel after Thermomechanical Process in (α+γ) Region
  9. Embrittlement of Fuel Gas Piping Made of Wrought Nickel-Based Superalloy Due to Inadequate Heat Treatment
  10. Meeting Diary/Veranstaltungskalender
  11. Meeting Diary
https://doi.org/10.3139/147.013103

Articles in the same Issue

  1. Contents/Inhalt
  2. Contents
  3. Editorial
  4. Editorial
  5. Technical Contributions/Fachbeiträge
  6. Microstructure Evolution and Mechanical Properties Investigation of Al-6 %Cu Alloy Laser and GTA Welds
  7. Preparation and Microstructural Characterisation of Metal Injection Moulded Powder Metallurgical Components (MIM) in the Green and Sintered Conditions
  8. Quantitative Analysis of Microstructure in Low Carbon Steel after Thermomechanical Process in (α+γ) Region
  9. Embrittlement of Fuel Gas Piping Made of Wrought Nickel-Based Superalloy Due to Inadequate Heat Treatment
  10. Meeting Diary/Veranstaltungskalender
  11. Meeting Diary
Downloaded on 23.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/147.013103/html
Scroll to top button