Skip to main content
Article
Licensed
Unlicensed Requires Authentication

Imprint

Published/Copyright: February 23, 2021
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 111 Issue 12

Published Online: 2021-02-23
Published in Print: 2020-12-01

© 2020 by Walter de Gruyter Berlin/Boston

Articles in the same Issue

  1. CONTENTS
  2. Original Contributions
  3. Hot forming behavior of a modified Ni–Cr superalloy
  4. Investigation on mechanical properties of solution strengthened and austempered ferritic ductile irons
  5. Effect of martensite volume fraction on abnormal work hardening behavior of a low carbon low alloy ferrite–martensite dual-phase steel
  6. Enhancing the hydrogen embrittlement resistance of 304 steel by grain boundary engineering
  7. An investigation of corrosion behavior of Al–B4C nanocomposites in various corrosive solutions
  8. Effect of Al–Si alloy coating on interfacial reactions and tensile strength in Ti/Al dissimilar brazing joints
  9. Experimental and theoretical investigation of thermal properties of natural soil based geopolymer composites
  10. Investigations on pressure dependent physical properties of cubic AMoO3 (A = Ca, Sr) perovskites: A DFT calculation
  11. Short Communications
  12. Synthesis of nanostructured zirconium monosilicide via a lithium thermal reduction route at low temperature
  13. Notifications
  14. DGM
  15. Conferences
  16. Imprint
  17. Author Index 2020
  18. Keyword Index 2020
https://doi.org/10.3139/146.111977

Articles in the same Issue

  1. CONTENTS
  2. Original Contributions
  3. Hot forming behavior of a modified Ni–Cr superalloy
  4. Investigation on mechanical properties of solution strengthened and austempered ferritic ductile irons
  5. Effect of martensite volume fraction on abnormal work hardening behavior of a low carbon low alloy ferrite–martensite dual-phase steel
  6. Enhancing the hydrogen embrittlement resistance of 304 steel by grain boundary engineering
  7. An investigation of corrosion behavior of Al–B4C nanocomposites in various corrosive solutions
  8. Effect of Al–Si alloy coating on interfacial reactions and tensile strength in Ti/Al dissimilar brazing joints
  9. Experimental and theoretical investigation of thermal properties of natural soil based geopolymer composites
  10. Investigations on pressure dependent physical properties of cubic AMoO3 (A = Ca, Sr) perovskites: A DFT calculation
  11. Short Communications
  12. Synthesis of nanostructured zirconium monosilicide via a lithium thermal reduction route at low temperature
  13. Notifications
  14. DGM
  15. Conferences
  16. Imprint
  17. Author Index 2020
  18. Keyword Index 2020
Downloaded on 15.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.111977/html
Scroll to top button