Article
Open Access
Experimental investigation of slag/matte/metal/ tridymite equilibria in the Cu–Fe–O–S–Si system at 1473 K (1200°C), 1523 K (1250°C) and 1573 K (1300°C)
-
, , , , and
Published/Copyright:
February 23, 2021
Published Online: 2021-02-23
Published in Print: 2020-05-01
© 2020 by Walter de Gruyter Berlin/Boston
Articles in the same Issue
- CONTENTS
- Original Contributions
- Experimental investigation of slag/matte/metal/ tridymite equilibria in the Cu–Fe–O–S–Si system at 1473 K (1200°C), 1523 K (1250°C) and 1573 K (1300°C)
- Phase relations of the Ce2Co17–Sm2Co17 pseudo-binary system
- Effect of the matrix structure on vermicular graphite cast iron properties
- Preparation of heavy-section ductile iron with improved mechanical properties through quenching and tempering
- Investigating the local deformation and transformation behavior of sintered X3CrMnNi16-7-6 TRIP steel using a calibrated crystal plasticity-based numerical simulation model
- Effect on corrosion resistance of microstructure of 316L austenitic stainless steel subjected to combined torsion–tension deformation
- Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites
- Effect of joining temperature on Al2024/Ag/Ti-6Al-4V joints during transient liquid phase bonding
- Effects of Gd on the microstructure and mechanical properties of Mg–Li dual-phase alloys
- Critical assessment of CuZn39Pb2 processing maps
- Notifications
- DGM
- CONFERENCES
- Imprint
Keywords for this article
Phase equilibria;
Matte;
Slag;
Non-ferrous metallurgy;
Cu-Fe-O-S-Si system
Creative Commons
BY 4.0
Articles in the same Issue
- CONTENTS
- Original Contributions
- Experimental investigation of slag/matte/metal/ tridymite equilibria in the Cu–Fe–O–S–Si system at 1473 K (1200°C), 1523 K (1250°C) and 1573 K (1300°C)
- Phase relations of the Ce2Co17–Sm2Co17 pseudo-binary system
- Effect of the matrix structure on vermicular graphite cast iron properties
- Preparation of heavy-section ductile iron with improved mechanical properties through quenching and tempering
- Investigating the local deformation and transformation behavior of sintered X3CrMnNi16-7-6 TRIP steel using a calibrated crystal plasticity-based numerical simulation model
- Effect on corrosion resistance of microstructure of 316L austenitic stainless steel subjected to combined torsion–tension deformation
- Effect of different reinforcement on the microstructure and mechanical properties of AA2024-based metal matrix nanocomposites
- Effect of joining temperature on Al2024/Ag/Ti-6Al-4V joints during transient liquid phase bonding
- Effects of Gd on the microstructure and mechanical properties of Mg–Li dual-phase alloys
- Critical assessment of CuZn39Pb2 processing maps
- Notifications
- DGM
- CONFERENCES
- Imprint