Dynamic recrystallisation and modelling of microstructural evolution of high-titanium-content 6061 aluminium alloy
-
Wei Chen
,
Yanfei Gu
Abstract
The dynamic recrystallisation behaviour of high-titaniumcontent 6061 aluminium alloy was investigated by hot compression tests within the temperature range of 623- 783 K and at strain rates of 0.01 -10 s-1. The characteristics of the true stress-strain curves acquired in the hot compression tests were investigated, and it was observed that the dynamic recrystallisation of high-titanium-content 6061 aluminium alloy occurs within the range of deformation temperatures of 623 -783 K, with strain rates of 0.001 - 0.1 s-1as evinced by a physically-based constitutive analysis. The kinetic model of dynamic recrystallisation was deduced to describe the dynamic recrystallisation behaviour of high-titanium-content 6061 aluminium alloy, and the dynamic recrystallisation grain size model was also constructed.
© 2020 by Walter de Gruyter Berlin/Boston
Artikel in diesem Heft
- CONTENTS
- Original Contributions
- Enthalpies of mixing in binary Cu–Eu and ternary Al–Cu–Eu liquid alloys
- The effect of Al2O3 on fayalite-based copper smelting slags in equilibrium with matte and tridymite at 1 2008C and P(SO2) = 0.25 atm
- Phase transformations during the oxidation of fayalite in iron-rich nickel slag
- Hot working of SP-700 titanium alloy with lamellar α + β starting structure using a processing map
- Phase transformations and microstructural evolution in nanocrystalline Fe71B23Nb6 alloy prepared by mechanical alloying
- Dynamic recrystallisation and modelling of microstructural evolution of high-titanium-content 6061 aluminium alloy
- High-strength wire + arc additive manufactured steel
- Effect of Al substitution for Ga on magnetostriction enhancement by annealing of as-cast Fe–Ga–Al alloys under low magnetic fields
- Investigation of time-dependent corrosion behavior of Sr-modified AlSi12 alloy
- Synthesis of LiCoO2 particles with tunable sizes by a urea-based-homogeneous-precipitation method
- Short Communications
- High temperature oxidation resistance of porous Ni–Cr–Fe materials
- Notifications
- DGM
- Conferences
- Imprint
Artikel in diesem Heft
- CONTENTS
- Original Contributions
- Enthalpies of mixing in binary Cu–Eu and ternary Al–Cu–Eu liquid alloys
- The effect of Al2O3 on fayalite-based copper smelting slags in equilibrium with matte and tridymite at 1 2008C and P(SO2) = 0.25 atm
- Phase transformations during the oxidation of fayalite in iron-rich nickel slag
- Hot working of SP-700 titanium alloy with lamellar α + β starting structure using a processing map
- Phase transformations and microstructural evolution in nanocrystalline Fe71B23Nb6 alloy prepared by mechanical alloying
- Dynamic recrystallisation and modelling of microstructural evolution of high-titanium-content 6061 aluminium alloy
- High-strength wire + arc additive manufactured steel
- Effect of Al substitution for Ga on magnetostriction enhancement by annealing of as-cast Fe–Ga–Al alloys under low magnetic fields
- Investigation of time-dependent corrosion behavior of Sr-modified AlSi12 alloy
- Synthesis of LiCoO2 particles with tunable sizes by a urea-based-homogeneous-precipitation method
- Short Communications
- High temperature oxidation resistance of porous Ni–Cr–Fe materials
- Notifications
- DGM
- Conferences
- Imprint
