Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
-
C. J. Rüsing
Abstract
The local deformation behavior of fine grained high manganese steel featuring the twinning-induced plasticity (TWIP) effect was investigated at different temperatures. A thorough set of mechanical, optical and electron optical experiments was conducted employing a miniature in-situ load frame, confocal laser scanning microscopy, digital image correlation and electron backscatter diffraction. The combination of the techniques used allowed for establishing a solid relationship between local texture, deformation and surface evolution. The results obtained show that on the microscopic scale the deformation is inhomogeneous even in the fine grained TWIP steel featuring the highest strains and the most significant surface evolution observed in regions with a local {111}-texture. Since grain orientation has an effect on both slip and twinning, the degree of heterogeneity of deformation is very similar in the temperature range studied, irrespective of the rate of twin evolution.
References
[1] O.Grössel, L.Kröger, G.Frommeyer, L.W.Meyer: Int. J. P.16 (2000) 1391–1409. DOI:10.1016/S0749-6419(00)00015-210.1016/S0749-6419(00)00015-2Search in Google Scholar
[2] O.Grössel: Dissertation, Papierflieger, Clausthal-Zellerfeld (2000).Search in Google Scholar
[3] G.Frommeyer, U.Briix, P.Neumann: ISIJ International43 (2003) 438–446. DOI:10.2355/isijinternational.43.43810.2355/isijinternational.43.438Search in Google Scholar
[4] T.Niendorf, C.Lotze, D.Canadinc, A.Frehn, HJ.Maier: Mater. Sei. Eng. A499 (2009) 518–524. DOI:10.1016/j.msea.2008.09.03310.1016/j.msea.2008.09.033Search in Google Scholar
[5] T.Niendorf, C.Burs, D.Canadinc, HJ.Maier: Int. J. Mat. Res.100 (2009) 603–608. DOI:10.3139/146.11006410.3139/146.110064Search in Google Scholar
[6] J.Lackmann, T.Niendorf, M.Maxisch, G.Grundmeier, H.J.Maier: Mater. Charact. (2011) 298–303. DOI: 10.1016/j.matchar.2010.12.008.http://dx.doi.org/10.1016/j.matchar.2010.12.008Search in Google Scholar
[7] O.Bouaziz, S.Allain, Y.Estrin: Scripta Mater.62 (2010) 713–715. DOI:10.1016/j.scriptamat.2010.01.04010.1016/j.scriptamat.2010.01.040Search in Google Scholar
[8] S.Hoffmann, W.Bleck: Steel Research International82 (2011) 32–38. DOI:10.1002/srin.20100022010.1002/srin.201000220Search in Google Scholar
[9] T.R.Bieler, M.A.Crimp, Y.Yang, L.Wang, P.Eisenlohr, Mason, W.Liu, G.E.Ice: JOM61 (2009) 45–52. DOI:10.1007/sll837-009-0180-x D.E.Search in Google Scholar
[10] D.Raabe, M.Sachtleber, H.Weiland, G.Scheele, Z.Zhao: Mater.51 (2003) 1539–1560. DOI:10.1016/S1359-6454(02)00557-8 Acta10.1016/S1359-6454(02)00557-8Search in Google Scholar
[11] I.Gutierrez-Urrutia, S.Zaefferer, D.Raabe: Mater. Sei.A527 (2010) 3552–3560. DOI:10.1016/j.msea.2010.02.041 Eng.10.1016/j.msea.2010.02.041Search in Google Scholar
[12] S.Allain, J.P.Chateau, O.Bouaziz, S.Migot, N.Guelton: Mater. Sei. Eng. A387-389 (2004) 158–162. DOI:10.1016/j.msea.2004.01.05910.1016/j.msea.2004.01.059Search in Google Scholar
[13] A.Dumay, J.P.Chateau, S.Allain, S.Migot, O.Bouaziz: Mater. Sei. Eng.A483-484 (2008) 184–187. DOI:10.1016/j.msea.2006.12.17010.1016/j.msea.2006.12.170Search in Google Scholar
[14] A.Soulami, K.S.Choi, Y.F.Shen, W.N.Liu, X.Sun, M.A.leel: Mater. Sei. Eng. A528 (2011) 1402–1408. DOI: 10.1016/j.msea.2010.10.031 Kha-10.1016/j.msea.2010.10.031Search in Google Scholar
[15] T.Niendorf, H.J.Maier, A.Frehn: Proc. HMnS2011, Seoul, 2011.Search in Google Scholar
© 2012, Carl Hanser Verlag, München
Articles in the same Issue
- Contents
- Contents
- Editorial
- Editorial January 2012
- Original Contributions
- High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement
- Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
- Microstructure of a eutectic NiAl—Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace
- Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
- Corrosion behavior of silicon oxycarbide-based ceramic nanocomposites under hydrothermal conditions
- Thermal cycling damage evolution of a thermal barrier coating and the influence of substrate creep, interface roughness and pre-oxidation
- Influence of creep and cyclic oxidation in thermal barrier coatings
- Residual stress states as a result of bending and straightening processes of steels in different heat treatment conditions
- Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
- Investigation of the surface residual stresses in spray cooled induction hardened gearwheels
- Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films
- Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN-GJS-400-18LT
- Failure behaviour of the superalloy MAR-M247 LC under LCF, HCF and combined LCF/HCF loading
- Measuring techniques for the very high cycle fatigue behaviour of high strength steel at ultrasonic frequencies
- Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
- Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
- DGM News
- DGM News
Articles in the same Issue
- Contents
- Contents
- Editorial
- Editorial January 2012
- Original Contributions
- High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement
- Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
- Microstructure of a eutectic NiAl—Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace
- Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
- Corrosion behavior of silicon oxycarbide-based ceramic nanocomposites under hydrothermal conditions
- Thermal cycling damage evolution of a thermal barrier coating and the influence of substrate creep, interface roughness and pre-oxidation
- Influence of creep and cyclic oxidation in thermal barrier coatings
- Residual stress states as a result of bending and straightening processes of steels in different heat treatment conditions
- Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
- Investigation of the surface residual stresses in spray cooled induction hardened gearwheels
- Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films
- Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN-GJS-400-18LT
- Failure behaviour of the superalloy MAR-M247 LC under LCF, HCF and combined LCF/HCF loading
- Measuring techniques for the very high cycle fatigue behaviour of high strength steel at ultrasonic frequencies
- Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
- Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
- DGM News
- DGM News
