Home Density and atomic volume in liquid Al–Fe and Al–Ni binary alloys
Article
Licensed
Unlicensed Requires Authentication

Density and atomic volume in liquid Al–Fe and Al–Ni binary alloys

  • Yuriy Plevachuk , Ivan Egry , Jürgen Brillo , Dirk Holland-Moritz and Ivan Kaban
Published/Copyright: May 23, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 98 Issue 2

Abstract

The density of liquid Al – Fe and Al – Ni binary alloys have been determined over a wide temperature range by a non-contact technique combining electromagnetic levitation and optical dilatometry. The temperature and composition dependences of the density are analysed. A negative excess volume correlates with the negative enthalpy of mixing, compound forming ability and chemical short-range ordering in liquid Al – Fe and Al – Ni alloys.

Keywords: Electromagnetic levitation; Density; Atomic volume; Aluminium – iron; Aluminium – nickel
* Correspondence address, Dr. Yuriy Plevachuk, Ivan Franko National University, Department of Metal Physics, 79005 Lviv, Ukraine, Tel.: +38 032 296 4270, E-mail:

References

[1] S.C.Deevi, P.J.Maziasz, V.K.Sikka, R.W.Cahn (Eds.): Proceedings of the International Symposium on Nickel and Iron Aluminides: Processing, Properties, and Applications. ASM International, Metals Park, OH (1997).Search in Google Scholar

[2] S.C.Deevi, D.G.Morris, V.K.Sikka (Eds.): Iron Aluminides: Alloy Design, Processing, Properties and Applications, in Mater. Sci. Eng. A258 (Special Issue) 1998.Search in Google Scholar

[3] T.B.Massalski, J.L.Murray, K.H.Bennet, H.Baker: Binary Alloy Phase Diagrams, American Society for Metals, Metals Park, OH (1986).Search in Google Scholar

[4] A.Il9inskii, S.Slyusarenko, O.Slukhovskii, I.Kaban, W.Hoyer: Mater. Sci. Eng. A3251–2 (2002) 98.10.1016/S0921-5093(01)01403-4Search in Google Scholar

[5] T.Schenk, V.Simonet, D.Holland-Moritz, R.Bellisent, T.Hansen, P.Convert, D.Herlach: Europhys. Letters65 (2004) 34.10.1209/epl/i2003-10062-xSearch in Google Scholar

[6] S.Das, J.Horbach, M.Koza, S.Mavila Chatoh, A.Meyer: Appl. Phys. Letters86 (2005) 11918.10.1063/1.1845590Search in Google Scholar

[7] M.Maret, T.Pomme, A.Pasturel: Phys. Rev. B42 (1990) 1598.10.1103/PhysRevB.42.1598Search in Google Scholar

[8] J.Brillo, A.Bytchkov, I.Egry, L.Hennet, G.Mathiak, I.Pozdnyakova, D.L.Price, D.Thiaudiere, D.Zanghi: submitted to J. Non-Cryst. Sol.Search in Google Scholar

[9] D.M.Herlach, R.F.Cochrane, I.Egry, H.I.Fecht, A.L.Greer: Int. Mat. Rev.38 (1993) 273.10.1179/095066093790326267Search in Google Scholar

[10] J.Brillo, I.Egry: Int. J. Thermophys.24 (2003) 1155.10.1023/A:1025021521945Search in Google Scholar

[11] J.Brillo, I.Egry: Z. Metallkd.95 (95) (2004) 691.10.3139/146.018009Search in Google Scholar

[12] T.Iida, R.I.L.Guthrie: The Physical Properties of Liquid Metals, Clarendon Press, Oxford (1993) 71.Search in Google Scholar

[13] G.D.Ayushina, E.S.Levin, P.V.Geld: Russ. J. Phys. Chem.43 (1969) 2756.Search in Google Scholar

[14] K.Mukai, L.Fang, Z.Li, F.Xiao: Materials Transactions.45 (45) (2004) 1754.10.2320/matertrans.45.1754Search in Google Scholar

[15] A.Il9inskii, I.Kaban, W.Hoyer, A.Shpak, L.Taranenko: J. Non-Cryst. Solids, 3471–3 (2004) 39; J. Non-Cryst. Solids, 352/5 (2006) 473.10.1016/j.jnoncrysol.2004.09.006Search in Google Scholar

[16] M.J.Assael, K.Kakosimos, R.M.Banish, J.Brillo, I.Egry, R.Brooks, P.N.Quested, K.C.Mills, A.Nagashima, Y.Sato, W.A.Wakeham: J. Phys. Chem. Ref. Data, 35/1 (2006) 285.10.1063/1.2149380Search in Google Scholar

[17] A.W.Porter: Trans. Faraday Soc.16 (1920) 1920.10.1039/tf9201600336Search in Google Scholar

[18] G.I.Batalin, E.A.Beloborodova, V.P.Kazimirov: Thermodynamics and Structure of Liquid Aluminium Alloys, Metallurgiya, Moscow (1983).Search in Google Scholar

[19] V.M.Sandakov, Y.O.Esin, P.V.Geld: Russ. J. Phys. Chem.45 (1971) 1798.Search in Google Scholar

[20] O.Akinlade, R.N.Singh, F.Sommer: J. Alloys Comp.299 (2000) 163.10.1016/S0925-8388(99)00682-9Search in Google Scholar

Received: 2006-7-21
Accepted: 2006-12-1
Published Online: 2013-05-23
Published in Print: 2007-02-01

© 2007, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. A comparison of different distributions of azimuth angles in the sin2 ψ-method
  5. Experimental study and thermodynamic assessment of the ZrO2–DyO1.5 system
  6. Liquid–solid phase equilibria in metal-rich Hf–Ti–Si alloys
  7. Density and atomic volume in liquid Al–Fe and Al–Ni binary alloys
  8. Identification of liquid/solid transformations in eutectic Pb–Sn alloy
  9. Cyclic deformation behaviour and lifetime calculation of the magnesium die-cast alloys AZ91D, MRI 153M and MRI 230D
  10. Applied
  11. Superplastic deformation behavior of a spray-deposited eutectic NiAl/Cr(Mo) alloy doped with Dy
  12. Fracture behavior of overmatched ductile iron weldment
  13. Design of carbide-free low-temperature ultra high strength bainitic steels
  14. The influence of orientation and aluminium content on the deformation mechanisms of Hadfield steel single crystals
  15. Effect of tempering on the microstructure and hardness of ledeburitic chromium steel X155CrVMo12.1
  16. Notifications
  17. DGM News
https://doi.org/10.3139/146.101447
Keywords for this article
Electromagnetic levitation; Density; Atomic volume; Aluminium – iron; Aluminium – nickel

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. A comparison of different distributions of azimuth angles in the sin2 ψ-method
  5. Experimental study and thermodynamic assessment of the ZrO2–DyO1.5 system
  6. Liquid–solid phase equilibria in metal-rich Hf–Ti–Si alloys
  7. Density and atomic volume in liquid Al–Fe and Al–Ni binary alloys
  8. Identification of liquid/solid transformations in eutectic Pb–Sn alloy
  9. Cyclic deformation behaviour and lifetime calculation of the magnesium die-cast alloys AZ91D, MRI 153M and MRI 230D
  10. Applied
  11. Superplastic deformation behavior of a spray-deposited eutectic NiAl/Cr(Mo) alloy doped with Dy
  12. Fracture behavior of overmatched ductile iron weldment
  13. Design of carbide-free low-temperature ultra high strength bainitic steels
  14. The influence of orientation and aluminium content on the deformation mechanisms of Hadfield steel single crystals
  15. Effect of tempering on the microstructure and hardness of ledeburitic chromium steel X155CrVMo12.1
  16. Notifications
  17. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 3.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.101447/html?srsltid=AfmBOoqi9a-wU6SA3dEJSgE6ZuGMczn6VzWVuE78wx0U8zNHUpthgngM
Scroll to top button