Skip to main content
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: May 23, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 98 Issue 2

Published Online: 2013-05-23
Published in Print: 2007-02-01

© 2007, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. A comparison of different distributions of azimuth angles in the sin2 ψ-method
  5. Experimental study and thermodynamic assessment of the ZrO2–DyO1.5 system
  6. Liquid–solid phase equilibria in metal-rich Hf–Ti–Si alloys
  7. Density and atomic volume in liquid Al–Fe and Al–Ni binary alloys
  8. Identification of liquid/solid transformations in eutectic Pb–Sn alloy
  9. Cyclic deformation behaviour and lifetime calculation of the magnesium die-cast alloys AZ91D, MRI 153M and MRI 230D
  10. Applied
  11. Superplastic deformation behavior of a spray-deposited eutectic NiAl/Cr(Mo) alloy doped with Dy
  12. Fracture behavior of overmatched ductile iron weldment
  13. Design of carbide-free low-temperature ultra high strength bainitic steels
  14. The influence of orientation and aluminium content on the deformation mechanisms of Hadfield steel single crystals
  15. Effect of tempering on the microstructure and hardness of ledeburitic chromium steel X155CrVMo12.1
  16. Notifications
  17. DGM News
https://doi.org/10.3139/146.070203

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. A comparison of different distributions of azimuth angles in the sin2 ψ-method
  5. Experimental study and thermodynamic assessment of the ZrO2–DyO1.5 system
  6. Liquid–solid phase equilibria in metal-rich Hf–Ti–Si alloys
  7. Density and atomic volume in liquid Al–Fe and Al–Ni binary alloys
  8. Identification of liquid/solid transformations in eutectic Pb–Sn alloy
  9. Cyclic deformation behaviour and lifetime calculation of the magnesium die-cast alloys AZ91D, MRI 153M and MRI 230D
  10. Applied
  11. Superplastic deformation behavior of a spray-deposited eutectic NiAl/Cr(Mo) alloy doped with Dy
  12. Fracture behavior of overmatched ductile iron weldment
  13. Design of carbide-free low-temperature ultra high strength bainitic steels
  14. The influence of orientation and aluminium content on the deformation mechanisms of Hadfield steel single crystals
  15. Effect of tempering on the microstructure and hardness of ledeburitic chromium steel X155CrVMo12.1
  16. Notifications
  17. DGM News
Downloaded on 27.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.070203/html?lang=en
Scroll to top button