Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: June 11, 2013
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 100 Issue 8

Published Online: 2013-06-11
Published in Print: 2009-08-01

© 2009, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Em. O. Univ.-Professor Dipl.-Ing. Dr. mont. Dr. h. c. Franz Jeglitsch zum 75. Geburtstag
  5. History
  6. Technology and mechanical properties of advanced γ-TiAl based alloys
  7. Basic
  8. Quantitative 3D characterisation of graphite morphology in cast iron – correlation between processing, microstructure and properties
  9. Characterization and properties of NiTi(W) and CuAlNi shape memory alloys
  10. On the role of eutectics during recrystallization in a single crystal nickel-base superalloy – CMSX-4
  11. Influence of deposition conditions on texture development and mechanical properties of TiN coatings
  12. Internal oxidation of metastable metallic materials
  13. Short-term creep behavior of a Cr Mo V hot-work tool steel
  14. Overview on established and novel FIB based miniaturized mechanical testing using in-situ SEM
  15. Applied
  16. Recrystallization and grain growth in the nickel-based superalloy allvac 718Plus
  17. Surface modifications and their effect on the nickel release rate in nickel–titanium shape memory alloys
  18. Thermal stability of high-speed steels as characterized by X-ray diffraction profile analysis
  19. Structure, stresses and stress relaxation of TiN/Cu multilayer and nanocomposite coatings
  20. Humidity influence on the adhesion of biomimetic fibrillar surfaces
  21. Design strategy for new biodegradable Mg–Y–Zn alloys for medical applications
  22. Influence of an apparent r-curve on strength and fracture statistics of ceramic laminates
  23. Avoiding grain defects in single crystal components by application of a heat conductor technique
  24. Notifications
  25. DGM News
https://doi.org/10.3139/146.090804

Articles in the same Issue

  1. Contents
  2. Contents
  3. Editorial
  4. Em. O. Univ.-Professor Dipl.-Ing. Dr. mont. Dr. h. c. Franz Jeglitsch zum 75. Geburtstag
  5. History
  6. Technology and mechanical properties of advanced γ-TiAl based alloys
  7. Basic
  8. Quantitative 3D characterisation of graphite morphology in cast iron – correlation between processing, microstructure and properties
  9. Characterization and properties of NiTi(W) and CuAlNi shape memory alloys
  10. On the role of eutectics during recrystallization in a single crystal nickel-base superalloy – CMSX-4
  11. Influence of deposition conditions on texture development and mechanical properties of TiN coatings
  12. Internal oxidation of metastable metallic materials
  13. Short-term creep behavior of a Cr Mo V hot-work tool steel
  14. Overview on established and novel FIB based miniaturized mechanical testing using in-situ SEM
  15. Applied
  16. Recrystallization and grain growth in the nickel-based superalloy allvac 718Plus
  17. Surface modifications and their effect on the nickel release rate in nickel–titanium shape memory alloys
  18. Thermal stability of high-speed steels as characterized by X-ray diffraction profile analysis
  19. Structure, stresses and stress relaxation of TiN/Cu multilayer and nanocomposite coatings
  20. Humidity influence on the adhesion of biomimetic fibrillar surfaces
  21. Design strategy for new biodegradable Mg–Y–Zn alloys for medical applications
  22. Influence of an apparent r-curve on strength and fracture statistics of ceramic laminates
  23. Avoiding grain defects in single crystal components by application of a heat conductor technique
  24. Notifications
  25. DGM News
Downloaded on 5.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.090804/html
Scroll to top button