Skip to main content
Article
Licensed
Unlicensed Requires Authentication

DGM News

Published/Copyright: December 11, 2015
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 106 Issue 12

Published Online: 2015-12-11
Published in Print: 2015-12-08

© 2015, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Round robin for testing instrumented indenters with silicon reference springs
  5. Effect of heat treatment and deformation on the microstructure and mechanical properties of SP-700 titanium alloy
  6. Bulk processing of fine grained OFHC copper by cyclic channel die compression
  7. Microstructure of Al-5Ti-0.6C-1Ce master alloy and its grain-refining performance
  8. Rheological study of semi-solid TiAl3/ZL101 composites prepared by ultrasonic vibration
  9. Mathematical modeling of energy transfer to sheet surface layers and optimization of roll bonding strength
  10. The impact of consolidation and interparticle forces on cohesive cement powder
  11. Synthesis of nano-manganese ferrite by an oxalate method and characterization of its magnetic properties
  12. Effect of short milling time and microwave heating on phase evolution, microstructure and mechanical properties of alumina–mullite–zirconia composites
  13. Preparation and characterization of 2–2 piezoelectric composites for damping application
  14. Fluorine-substituted HA reinforced with zircon as a novel nano-biocomposite ceramic: Preparation and characterization
  15. Short Communications
  16. Synthesis of high-density aligned Fe2O3 nanowires via two-step thermal oxidation
  17. Thermochemical synthesis and sintering of silver-8 wt.% copper oxide nanocomposite powders
  18. Effect of hybrid reinforcement on the high temperature tensile behavior of magnesium nanocomposite
  19. DGM News
  20. DGM News
https://doi.org/10.3139/146.015124

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. Round robin for testing instrumented indenters with silicon reference springs
  5. Effect of heat treatment and deformation on the microstructure and mechanical properties of SP-700 titanium alloy
  6. Bulk processing of fine grained OFHC copper by cyclic channel die compression
  7. Microstructure of Al-5Ti-0.6C-1Ce master alloy and its grain-refining performance
  8. Rheological study of semi-solid TiAl3/ZL101 composites prepared by ultrasonic vibration
  9. Mathematical modeling of energy transfer to sheet surface layers and optimization of roll bonding strength
  10. The impact of consolidation and interparticle forces on cohesive cement powder
  11. Synthesis of nano-manganese ferrite by an oxalate method and characterization of its magnetic properties
  12. Effect of short milling time and microwave heating on phase evolution, microstructure and mechanical properties of alumina–mullite–zirconia composites
  13. Preparation and characterization of 2–2 piezoelectric composites for damping application
  14. Fluorine-substituted HA reinforced with zircon as a novel nano-biocomposite ceramic: Preparation and characterization
  15. Short Communications
  16. Synthesis of high-density aligned Fe2O3 nanowires via two-step thermal oxidation
  17. Thermochemical synthesis and sintering of silver-8 wt.% copper oxide nanocomposite powders
  18. Effect of hybrid reinforcement on the high temperature tensile behavior of magnesium nanocomposite
  19. DGM News
  20. DGM News
Downloaded on 21.4.2026 from https://www.degruyterbrill.com/document/doi/10.3139/146.015124/html
Scroll to top button