Editorial January 2012

Articles in the same Issue

1. Contents
2. Contents
3. Editorial
4. Editorial January 2012
5. Original Contributions
6. High-strength aluminum-based light-weight materials for safety components – recent progress by microstructural refinement and particle reinforcement
7. Microstructure – deformation relationships in fine grained high manganese TWIP steel – the role of local texture
8. Microstructure of a eutectic NiAl—Mo alloy directionally solidified using an industrial scale and a laboratory scale Bridgman furnace
9. Effect of Si addition on the oxidation resistance of Co–Re–Cr-alloys: Recent attainments in the development of novel alloys
10. Corrosion behavior of silicon oxycarbide-based ceramic nanocomposites under hydrothermal conditions
11. Thermal cycling damage evolution of a thermal barrier coating and the influence of substrate creep, interface roughness and pre-oxidation
12. Influence of creep and cyclic oxidation in thermal barrier coatings
13. Residual stress states as a result of bending and straightening processes of steels in different heat treatment conditions
14. Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
15. Investigation of the surface residual stresses in spray cooled induction hardened gearwheels
16. Stress-gradient induced fatigue at ultra high frequencies in sub micron thin metal films
17. Influence of graphite spherical size on fatigue behaviour and fracture toughness of ductile cast iron EN-GJS-400-18LT
18. Failure behaviour of the superalloy MAR-M247 LC under LCF, HCF and combined LCF/HCF loading
19. Measuring techniques for the very high cycle fatigue behaviour of high strength steel at ultrasonic frequencies
20. Failure limits of continuous carbon fibre reinforced plastics loaded with fibre parallel compression
21. Development of an integrative simulation method to predict the microstructural influence on the mechanical behaviour of semi-crystalline thermoplastic parts
22. DGM News
23. DGM News