Alloy Systems for Heat Treated Sintered Steels∗
-
H. Danninger
Abstract
Sintered steel parts are increasingly used for applications subjected to high mechanical loads and therefore have to be heat treated frequently. For manufacturing, the close relationship between composition, esp. the alloy elements used, alloying variant, compactibility and sinterability as well as heat treating response is a characteristic feature. Compared to wrought steels, significantly more parameters have to be considered and defined. On the other hand, the powder metallurgy route offers more freedom regarding material design and property profile. Advanced alloy systems using Cr and/or Mn are demanding on sintering but offer economical and technical advantages, also for heat treatment.
Kurzfassung
Sinterstahl-Formteile werden heute immer mehr auch für hohe mechanische Belastungen eingesetzt und demzufolge zunehmend wärmebehandelt. Bei ihrer Herstellung ist die sehr enge Verflechtung zwischen Zusammensetzung, vor allem Wahl der Legierungselemente, Legierungsvariante, Press- und Sinterverhalten sowie Wärmebehandlungstechnik charakteristisch. Es müssen gegenüber schmelzmetallurgischen Stählen sehr viel mehr Parameter definiert und berücksichtigt werden; andererseits bietet die pulvermetallurgische Route viel Freiheit bei der Gestaltung des Materials und des Eigenschaftsprofils. Moderne Legierungssysteme mit Cr und/oder Mn stellen hohe Ansprüche insbesondere an den Sinterprozess, bieten aber andererseits sowohl ökonomische als auch technische Vorteile, vor allem auch bei der Wärmebehandlung.
References
1. Whittaker, D.: Innovation drives powder metallurgy structural components forward in the automotive industry. Powder Metallurgy Review4 (2015) 2, p. 35–53, open accessSearch in Google Scholar
2. Šalak, A.: Ferrous Powder Metallurgy. Cambridge Int. Sci. Publ., Cambridge, UK, 1995Search in Google Scholar
3. German, R. M.: Powder Metallurgy of Iron and Steel. MPIF, Princeton, NJ, USA, 199610.1007/978-1-4613-1215-4_15Search in Google Scholar
4. Schatt, W.; WietersK.-P.; Kieback, B.: Pulvermetallurgie. 2. ed., Springer, Berlin-Heidelberg-New York, 200710.1007/978-3-540-68112-0Search in Google Scholar
5. Albano-Müller, L.; Thümmler, F.; Zapf, G.: High strength sintered iron base alloys by using transition metal carbides. Powder Metall.16 (1973), p. 236–256, DOI: 10.1179/pom.1973.16.32.006Search in Google Scholar
6. Danninger, H.; Gierl, C.: New Alloying Systems for Ferrous Powder Metallurgy Precision Parts. Sci. Sintering40 (2008), p. 33–46, DOI: 10.2298/sos0801033dSearch in Google Scholar
7. Danninger, H.; Dlapka, M.: Wärmebehandlung von Sinterstahl – was ist anders? HTM J. Heat Treatm. Mat.73 (2018) 2, p. 117–130, DOI: 10.3139/105.110353Search in Google Scholar
8. LindskogP.: The history of Distaloy. Powder Metall.56 (2013) 5, p. 351–361, DOI: 10.1179/1743290113Y.0000000077Search in Google Scholar
9. De Oro Calderon, R.; Gierl-Mayer, C.; Danninger, H.: Die Masteralloy-Route für legierte Sinterstähle – neue Konzepte und Perspektiven. Proc. 36. Hagener Symposium Pulvermetallurgie: Pulvermetallurgie – Schlüssel zur Mobilität, 30.11–01.12.17, Hagen, Pulvermetallurgie in Wissenschaft und Praxis, Bd. 33, H.Kolaska, H.Danninger, B.Kieback (eds.), Fachverband Pulvermetallurgie, Hagen, 2017, on CDSearch in Google Scholar
10. Tengzelius, J.; Grek, S. E.; Blände, C. A.: Limitations and possibilities in the utilization of Cr and Mn as alloying elements in high strength sintered steels. Modern Dev. in Powder Metall.13 (1981), pp. 159–182Search in Google Scholar
11. Klein, A. N.; Oberacker, R.; Thümmler, F.: High-strength Si-Mn alloyed sintered steels – Microstructure and mechanical properties. Powder Metall. Int.17 (1985) 1, pp. 13–16Search in Google Scholar
12. Šalak, A.: High strength sintered manganese steels. Modern Dev. in Powder Metall.13 (1981), pp. 159–182Search in Google Scholar
13. Lindqvist, B.: Chromium alloyed PM steels – a new powder generation. Proc. EuroPM2001, 22.–24.10.01, Nice, France, EPMA, Vol. 1, Shrewsbury, UK, 2001, pp. 13–21Search in Google Scholar
14. Berg, S.; Maroli, B.: Properties obtained by chromium-containing material. Advances in powder metallurgy & particulate materials, Proc. PM2002, 16.-21.06.02, Orlando, FL, USA, Part 8, MPIF, Princeton, NJ, USA, 2002, p. 1–14, on CDSearch in Google Scholar
15. Dlapka, M.; Danninger, H.; Gierl, C.; Klammer, E.; Weiss, B.; Khatibi, G.; Betzwar-Kotas, A.: Fatigue behavior and wear resistance of sinter-hardening steels. Int. J. Powder Metallurgy48 (2012) 5, p. 49–60Search in Google Scholar
16. Danninger, H.; Sonntag, U.; Kuhnert, B.; Ratzi, R.: Automatic measurement of the effective load bearing cross section Ac in sintered steel. Pract. Metallography19 (2002) 8, p. 414–425Search in Google Scholar
17. Dlapka, M.; Danninger, H.; Gierl, C.; Lindqvist, B.: Defining the pores in PM components. Metal Powder Report65 (2010) 2, p. 30–33, DOI: 10.1016/s0026-0657(10)70093-xSearch in Google Scholar
18. Danninger, H.; Gierl, C.; Mühlbauer, G.; Silva Gonzalez, M.; Schmidt, J.; Specht, E.: Thermo-physical properties of sintered steels: Effect of porosity. Int. J. Powder Metall.47 (2011) 3, p. 31Search in Google Scholar
19. Dlapka, M.; Strobl, S.; Danninger, H.; Gierl, C.: Austenitkorngröße in sintergehärteten pulvermetallurgischen Stählen. Praktische Metallographie47 (2010) 12, p. 686–699, DOI: 10.3139/147.110099Search in Google Scholar
© 2019, Carl Hanser Verlag, München
Articles in the same Issue
- Praxis-Informationen/From and for Practice
- AWT Info
- HTM-Praxis
- Kurzfassungen/Abstracts
- Kurzfassungen
- Inhalt/Contents
- Inhalt
- Gratulation
- For the 80th birthday of Prof. habil. Dr.-Ing. Johann Grosch
- Scientific Contributions/Fachbeiträge
- Alloy Systems for Heat Treated Sintered Steels∗
- Early Stages of Precipitate Formation in a Dual Hardening Steel∗
- Fine Grain Resistance of Steel 20NiMoCr6-5+Nb (Material No. 1.6757) during Case Hardening depending on Cold Massive Forming∗
- Nitriding of Rolling Contact Races
- Comparative Studies on Electron Beam and Laser Beam Welding of QT-Steel and Structural Steel
Articles in the same Issue
- Praxis-Informationen/From and for Practice
- AWT Info
- HTM-Praxis
- Kurzfassungen/Abstracts
- Kurzfassungen
- Inhalt/Contents
- Inhalt
- Gratulation
- For the 80th birthday of Prof. habil. Dr.-Ing. Johann Grosch
- Scientific Contributions/Fachbeiträge
- Alloy Systems for Heat Treated Sintered Steels∗
- Early Stages of Precipitate Formation in a Dual Hardening Steel∗
- Fine Grain Resistance of Steel 20NiMoCr6-5+Nb (Material No. 1.6757) during Case Hardening depending on Cold Massive Forming∗
- Nitriding of Rolling Contact Races
- Comparative Studies on Electron Beam and Laser Beam Welding of QT-Steel and Structural Steel
