Home A New Mixing-Cell-in-Series Model to Predict Breakthrough Curve in Chemically Heterogeneous Media at Column Scale
Article
Licensed
Unlicensed Requires Authentication

A New Mixing-Cell-in-Series Model to Predict Breakthrough Curve in Chemically Heterogeneous Media at Column Scale

  • Safia Semra , Michel Sardin and Marie-Odile Simonnot
Published/Copyright: July 6, 2009
Become an author with De Gruyter Brill

The paper aims at modelling linearly adsorbed solute breakthrough curves into chemically heterogeneous media at column scale. The model was developed according to the mixing-cell-in-series approach and provided a general expression of the reduced variance for either water tracer or linearly adsorbed solute into either chemically homogeneous or heterogeneous medium. According to the experimental investigation of Semra et al. (2008), medium activity was assumed discrete with a known mean capacity. The chemical heterogeneity scale was assessed by the inverse of the ratio of active grains number to the total grains one. Discussion of the heterogeneous model results was accomplished considering breakthrough curve moments. Moment analysis showed that respective effects of interaction and transport are no longer independent from each other even when adsorption is linear. For a constant mean capacity and a constant hydrodynamic dispersion, the effective dispersion, accounted for by the temporal reduced variance, increases linearly with the chemical heterogeneity scale and the breakthrough spreading increase is favoured by high capacities. Moreover, mathematical form of the reduced variance predicts asymmetric breakthrough curves even in the case of equilibrium assumption. Considering kinetics, the model shows additive but independent effects of kinetics and hydrodynamics as in the case of chemically homogeneous media; it shows also independent kinetic effects from heterogeneity. Finally, modelling results were coherent with experimental observations made by Semra et al. (2008).

Published Online: 2009-7-6

©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston

Articles in the same Issue

  1. Article
  2. Statistical Approaches to Estimating the Relative Contribution of Intermolecular Interactions in Aliphatic Alcohols: Application to QSPR/QSAR Modeling of Their Boiling Points
  3. Alumina Sintering Kiln Flame Image Retrieval Based on ANN and Flame Shape Feature
  4. Study of Flow Field, Power and Mixing Time in a Two-Phase Stirred Vessel with Dual Rushton Impellers: Experimental Observation and CFD Simulation
  5. Hybrid Support Vector Regression and Genetic Algorithm Technique - A Novel Approach in Process Modeling
  6. Experimental Studies and CFD Modeling on the Effects of a Cut in the Baffle on Power Consumption
  7. Advanced Control for a Fire-Tube Shell Boiler System
  8. A Simplified Procedure for Quick Design of Dividing-Wall Columns for Industrial Applications
  9. Modeling and Energetic Analysis of Soybean Meal Drying in the Indirect Rotary Dryer
  10. Multivariable Fuzzy-Neural Model of Polymer Process
  11. Combined Experimental and Simulation (CFD) Analysis on Thermal Performance of Plate Heat Exchanger Using Kerosene as Working Fluid
  12. Modelling of Chromium Hexavalent Reduction by Ferrous Ion in a Batch Stirred Tank
  13. Process Simulation and Design of Reactive Distillation Column
  14. Modelling and Optimisation of an Industrial Ethylene Oxide Reactor
  15. Biofilter Response to Upsets in Process Conditions
  16. Optimization of Chemical Cleaning for Removal of Biofouling Layer
  17. Suspension Mixing Tank - Design Heuristic
  18. Pyrolysis Process Of Waste Polyethyleneterephtalate
  19. CFD Simulation of Solid Hold-Up in Gas-Solid Fluidized Bed at High Gas Velocities
  20. Non-Swirling Steady and Transient Flow Simulations in Short-Form Spray Dryers
  21. Development of a Hybrid Artificial Neural Network and Genetic Algorithm Model for Regime Identification of Slurry Transport in Pipelines
  22. Kinetics and Process Selectivity Studies for the Preparation of 3, 7-Dinitro-1, 3, 5, 7-Tetraazabicyclo [3, 3, 1] Nonane
  23. Flexibility Analysis in Flowsheet Simulation of Solids Processes
  24. New Methods for Adaptation to Degeneration in Process Models for Process Industries
  25. Hydro-Thermo-Mechanical Model for Highly Deformable Product during Convective Drying
  26. Modeling and Simulation studies for Aluminium - Fluoride Interactions in Nalgonda Defluoridation Process
  27. Modelling of Chlorine Contact Tank and the Combined Applications of Linear Model Predictive Control and Computational Fluid Dynamics
  28. Design of a PID Controller from a Predictive Control Algorithm
  29. A New Mixing-Cell-in-Series Model to Predict Breakthrough Curve in Chemically Heterogeneous Media at Column Scale
  30. Modeling of Adsorption of Chromium(VI) on Activated Carbons Derived from Corn (Zea mays) Cob
  31. A New Soft Sensor Based on Recursive Partial Least Squares for Online Melt Index Predictions in Grade-Changing HDPE Operations
  32. Effect of Operating Decisions on the Design and Energy Consumption of Inverted Batch Distillation Column
  33. CFD Modeling of Flow Pattern and Phase Holdup of Three Phase Fluidized Bed Contactor
  34. Chromium (VI) Adsorption on Activated Lignin
  35. Modeling of Phase and Chemical Equilibrium on the Quaternary System Acetic Acid, n-Butanol, Water and n-Butylacetate
  36. Hydrodynamics of a Bench-Scale Aerated Post Treatment Unit for Up-Flow Anaerobic Sludge Blanket Reactor
  37. Computational Models for the Determination of Antioxidant Capacity and Phenolics in Dietary Supplements Using Real-Time Proton Transfer Kinetics Data
  38. Potential Impact on Activated Sludge Treatment from the Implementation of Cellulosic Ethanol Production at a Pulp and Paper Mill
  39. Heat Transfer and Fluid Flow Analysis of Power Transformer's Cooling System Using CFD Approach
  40. Modeling Catalytic Combustion of Methane During the Warm-Up Period of the Converter
  41. Hybrid Modeling of Modified Mathematical Model for Gas Phase Olefine in Fluidized Bed Catalyst Reactors Using Artificial Neural Networks
  42. Effect of Intruded Exit on Riser Type Circulating Fluidized Beds
  43. Numerical Study on the Effect of Bend Angle on Turbulent Flow through Oscillating Bend
  44. Short Communication
  45. Methaemoglobin and Carboxyhaemoglobin Formation in Human Blood Due to NOx and CO Exposure: A Mathematical Model
  46. On the MPC of the Methanol Synthesis in a Simulated Moving Bed
  47. Review
  48. Modeling of Pyrolysis and Gasification of Biomass in Fluidized Beds: A Review
  49. Elevating Model Predictive Control Using Feedforward Artificial Neural Networks: A Review
  50. Letter to the Editor
  51. Comments on "Experimental Studies and CFD Modeling on the Effects of a Cut in the Baffle on Power Consumption"
  52. Comments on "Suspension Mixing Tank - Design Heuristic"
Downloaded on 16.9.2025 from https://www.degruyterbrill.com/document/doi/10.2202/1934-2659.1330/html
Scroll to top button