Moisture Sorption Behavior, and Effect of Moisture Content and Sorbitol on Thermo-Mechanical and Barrier Properties of Pectin Based Edible Films
-
Neda Maftoonazad
The moisture sorption behavior of pectin films formulated with different sorbitol content was evaluated and films with different equilibrium moisture contents were obtained. Different models were used to describe the moisture sorption isotherms (MSI) of pectin films, sorbitol and pectin powder. Based on changes observed in MSI, sorbitol was found to strongly interact with pectin polymers. Incorporation of sorbitol in pectin films resulted in lower equilibrium moisture contents at low to intermediate water activities (aw), but much higher moisture contents at aw > 0.53. Estimates of monolayer moisture values (1.53 3.81 g H2O kg-1 solids) were obtained by the application of Guggenheim-Anderson-DeBoer (GAB) model. A differential mechanical analyzer (DMA) was used for mechanical properties of formulated films while a differential scanning calorimeter (DSC) was used for thermal properties and glass transition temperature (Tg). With both DMA and DSC tests, the strong plasticizing action of water and sorbitol was evident. Tg vs. moisture content data were successfully fitted to the Fox empirical model. Multi-frequency DMA measurements provided estimates for the apparent activation energy (Ea) of the second glass transition in the range of 131-184 kJ/mol; the values for Ea decreased with increasing sorbitol concentration. Water vapor permeability (WVP) and mechanical properties of the films were also analyzed under varying sorbitol and moisture contents. Increasing moisture or addition of sorbitol to pectin films increased the elongation at break, but decreased the tensile strength, modulus of elasticity and Tg, and increased WVP of the films.
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
Artikel in diesem Heft
- Shorter Communication
- Measurements of the Crystallization Rates of Amorphous Sucrose and Lactose Powders from Spray Drying
- Fuzzy Identification and Modeling of a Gum-Protein Emulsifier in a Model Mayonnaise Color Development System
- Quality of Wastewater of the Sudanese Fermentation Industry
- Effect of Pretreatment of Milk Quality Characteristics of Jibna-Beida (White Cheese)
- Article
- Development of a Permeability Model for Palm Fruit Cake
- Modelling of the Internal Cooling of Fish during Ice Storage
- Assessment of Decimal Reduction of Pathogens in Frozen Chicken Products Using Surface Pasteurization
- Quality and Physiochemical Properties of Banana Paste under Vacuum Dehydration
- Microstructural Characteristics of Dried Carrot Pieces and Real Time Observations during Their Exposure to Moisture
- Simplified Kinetics and Colour Formation in Sucrose Solutions Based on A-Dicarbonyl Compounds
- Interactions of WPI and Xanthan in Microstructure and Rheological Properties of Gels and Emulsions
- Moisture Sorption Behavior, and Effect of Moisture Content and Sorbitol on Thermo-Mechanical and Barrier Properties of Pectin Based Edible Films
- Combined Effects of Heat and PEF on Microbial Inactivation and Quality of Liquid Egg Whites
- An Investigation of the Stability of Double Fortified Salt during Storage and Distribution in Nigeria
- Extraction and Purification of C-Phycocyanin from Spirulina Platensis Employing Aqueous Two Phase Systems
- Critical Review
- Improvement in Food Packaging Industry with Biobased Nanocomposites
Artikel in diesem Heft
- Shorter Communication
- Measurements of the Crystallization Rates of Amorphous Sucrose and Lactose Powders from Spray Drying
- Fuzzy Identification and Modeling of a Gum-Protein Emulsifier in a Model Mayonnaise Color Development System
- Quality of Wastewater of the Sudanese Fermentation Industry
- Effect of Pretreatment of Milk Quality Characteristics of Jibna-Beida (White Cheese)
- Article
- Development of a Permeability Model for Palm Fruit Cake
- Modelling of the Internal Cooling of Fish during Ice Storage
- Assessment of Decimal Reduction of Pathogens in Frozen Chicken Products Using Surface Pasteurization
- Quality and Physiochemical Properties of Banana Paste under Vacuum Dehydration
- Microstructural Characteristics of Dried Carrot Pieces and Real Time Observations during Their Exposure to Moisture
- Simplified Kinetics and Colour Formation in Sucrose Solutions Based on A-Dicarbonyl Compounds
- Interactions of WPI and Xanthan in Microstructure and Rheological Properties of Gels and Emulsions
- Moisture Sorption Behavior, and Effect of Moisture Content and Sorbitol on Thermo-Mechanical and Barrier Properties of Pectin Based Edible Films
- Combined Effects of Heat and PEF on Microbial Inactivation and Quality of Liquid Egg Whites
- An Investigation of the Stability of Double Fortified Salt during Storage and Distribution in Nigeria
- Extraction and Purification of C-Phycocyanin from Spirulina Platensis Employing Aqueous Two Phase Systems
- Critical Review
- Improvement in Food Packaging Industry with Biobased Nanocomposites