Effect of Phosphate and Silica on the Rate of Crystallization of Sucrose
-
Ms. Aamarpali Ratna Puri
and S. Kaur
Sucrose Crystallization is a mass transfer process. Sucrose molecule's migration from solution to crystal is driven by concentration difference between the mother liquor and the crystal surface; the coefficient of super saturation is the most important parameter for the process. Supersaturation of sugar solution depends on the purity and brix of the mother liquor. It has large influence on product's quantity and quality (crystal yield, crystal size and size distribution) and on the cost of production i.e output/hour and energy consumption. However there is still no generally applicable theory, which permits an accurate prediction of the effects of all the factors that govern the industrial processes of crystallization from solution. The crystal growth depends on the viscosity, which further depends on the nature and amount of impurities. If the local conditions are favourable, localized layers of molecules of impurity can statistically remain on the surface for a period of time. On the other hand, if the interaction between the impurity and the layer is weak, then there will be competition between impurity and sucrose molecules thus affecting the sucrose crystal growth rate. In the present study, the growth rate of sugar crystals was studied, using two-litre automatic laboratory vacuum pan, under controlled conditions in the presence of impurities. The effect of phosphate and silica (adding one at time) on the growth rate of sugar crystals was studied at two different temperatures 328 and 338K and with two different seed sizes of sucrose (850 and 600µm). The growth rate was studied at two degrees of supersaturation (1.10 and 1.15). The growth rate of sucrose crystals (with or without added impurities) showed significant increase with the 10°C rise in temperature. The growth rate of sucrose crystals increased with the increase in the level of phosphate but decreased with the increase in the level of silica in sugar solution.
©2011 Walter de Gruyter GmbH & Co. KG, Berlin/Boston
Articles in the same Issue
- Shorter Communication
- Effect of Process Conditions on Composition and Properties of Pectin and Apparent Viscosity of Sterilized and Concentrated Pulp of Tomatoes
- Effect of Phosphate and Silica on the Rate of Crystallization of Sucrose
- Desorption Isotherm of Mango Soy Fortified Yoghurt
- Article
- An Improved and Efficient Method for the Extraction of Phycocyanin from Spirulina sp
- Computer Simulation of On-Line Control of Thermal Sterilization of Canned Foods Subjected to Arbitrary Retort Temperature Deviations
- Parameters Affecting Milling Qualities of Undefatted Soybeans (Glycine max, L. Merill) (2): Selected Physical Properties
- Modeling of the Equilibrium Moisture Content (EMC) of Tarragon (Artemisia Dracunculus L.)
- Inactivation of Escherichia Coli 0157:H7 and Salmonella Enteritidis in Liquid Egg Using Continuous Pulsed Electric Field System
- Comparison of Technologies on Extracting and Concentrating Natural Vitamin E Using Supercritical CO2
Articles in the same Issue
- Shorter Communication
- Effect of Process Conditions on Composition and Properties of Pectin and Apparent Viscosity of Sterilized and Concentrated Pulp of Tomatoes
- Effect of Phosphate and Silica on the Rate of Crystallization of Sucrose
- Desorption Isotherm of Mango Soy Fortified Yoghurt
- Article
- An Improved and Efficient Method for the Extraction of Phycocyanin from Spirulina sp
- Computer Simulation of On-Line Control of Thermal Sterilization of Canned Foods Subjected to Arbitrary Retort Temperature Deviations
- Parameters Affecting Milling Qualities of Undefatted Soybeans (Glycine max, L. Merill) (2): Selected Physical Properties
- Modeling of the Equilibrium Moisture Content (EMC) of Tarragon (Artemisia Dracunculus L.)
- Inactivation of Escherichia Coli 0157:H7 and Salmonella Enteritidis in Liquid Egg Using Continuous Pulsed Electric Field System
- Comparison of Technologies on Extracting and Concentrating Natural Vitamin E Using Supercritical CO2