Improved State-Variable Internal Model Based Digital Controller for Three-Phase PWM Inverters that Complies with the Standard Iec 62040-3

This paper proposes an improved state-variable internal model based digital voltage controller suitable for three-phase PWM inverters with output transformer for medium and high power uninterruptible power supplies (UPS). The proposed controller is derived from the internal model principle using a state-variable approach in stationary alfa-beta frame. For the controller design an improved discrete-time model that uses the average of two samples in a switching period is proposed. In addition, this model takes into account the digital implementation time delay. With the proposed controller it is possible to obtain a high performance in both steady-state and load transients. Also, with the selected internal model, dc components resulting from the circuit implementation non-idealities are not amplified, avoiding transformer saturation. To validate the proposed digital controller and to demonstrate the steady-state and transient performance, experimental results from a 10kVA space vector modulated three-phase inverter, fully controlled by a DSP TMS320F241, are presented. In steady-state the UPS output voltages have very low total harmonic distortion (THD) for both balanced and unbalanced non-linear loads. The output voltage dynamic performance complies with the international Standard IEC 62040-3 Classification 1, which is the most severe limit making the three-phase PWM inverter suitable for most types of critical loads.