Article
Licensed
Unlicensed
Requires Authentication
Triclinic liddicoatite and elbaite in growth sectors of tourmaline from Madagascar
-
Mizuhiko Akizuki
,
Toshiro Nagase
Published/Copyright:
March 26, 2015
Abstract
Crystals of liddicoatite-elbaite tourmaline from a pegmatite in Jochy, Madagascar are composed of o{021̄1}, r{101̄1}, c{0001}, a{112̄̄0}, and m{101̄0} sectors, which correspond to the prominent crystal faces, respectively. Therefore, the sectors were produced during growth, not by strain after growth. The o, m, and r sectors of one specimen are biaxial between crossed polars [2V(-) = 30°, 20°, and 15°, respectively] and triclinic, as indicated by X-ray diffraction. The a sector is optically biaxial and orthorhombic. The c sector is optically uniaxial and essentially trigonal as indicated by single-crystal X-ray diffraction. The o, r, and c sectors are of liddicoatite component, whereas the a sector of the one specimen corresponds to fluor-elbaite. Another crystal specimen comprises a and m sectors, which are polysynthetically twinned, resulting in striations parallel to the c axis on the prism faces, and of liddicoatite. All five sectors have vacancies in the X-site (Ca, Na, ⃞ ).
Received: 1999-11-18
Accepted: 2000-10-29
Published Online: 2015-3-26
Published in Print: 2001-2-1
© 2015 by Walter de Gruyter Berlin/Boston
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Partitioning of Sr between coexisting minerals of the hollandite- and piemontite-groups in a quartz-rich schist from the Sanbagawa metamorphic belt, Japan
- Crystallization processes in migmatites
- Amblygonite-montebrasite solid solutions as monitors of fluorine in evolved granitic and pegmatitic melts
- Reduction of water loss from gold-palladium capsules during piston-cylinder experiments by use of pyrophyllite powder
- Trace-element partitioning between immiscible lunar melts: An example from naturally occurring lunar melt inclusions
- Assemblages with titanite (CaTiOSiO4), Ca-Mg-Fe olivine and pyroxenes, Fe-Mg-Ti oxides, and quartz: Part I. Theory
- Assemblages with titanite (CaTiOSiO4), Ca-Mg-Fe olivine and pyroxenes, Fe-Mg-Ti oxides, and quartz: Part II. Application
- The stability of clinopyroxene in the system CaO-MgO-SiO2-TiO2 (CMST)
- Ordering kinetics of Mg-Fe2+ exchange in a Wo43En46Fs11 augite
- Al,Si order in the crystal structure of α-eucryptite (LiAlSiO4)
- TEM-EDX study of weathered layers on the surface of volcanic glass, bytownite, and hypersthene in volcanic ash from Sakurajima volcano, Japan
- Electron microscopic study of the dehydration of diaspore
- Crystal properties and energetics of synthetic kaolinite
- Structures and energies of AlOOH and FeOOH polymorphs from plane wave pseudopotential calculations
- XPS measurement of fivefold and sixfold coordinated sulfur in pyrrhotites and evidence for millerite and pyrrhotite surface species
- Structure of synthetic 6-line ferrihydrite by electron nanodiffraction
- Atomic structures of planar defects in oxybiotite
- Potassium hydrogen disilicate: A possible model compound for 17O NMR spectra of hydrous silicate glasses
- Strain analysis of phase transitions in (Ca,Sr)TiO3 perovskites
- Triclinic liddicoatite and elbaite in growth sectors of tourmaline from Madagascar
- Letter. A simple inorganic process for formation of carbonates, magnetite, and sulfides in martian meteorite ALH84001
Articles in the same Issue
- Partitioning of Sr between coexisting minerals of the hollandite- and piemontite-groups in a quartz-rich schist from the Sanbagawa metamorphic belt, Japan
- Crystallization processes in migmatites
- Amblygonite-montebrasite solid solutions as monitors of fluorine in evolved granitic and pegmatitic melts
- Reduction of water loss from gold-palladium capsules during piston-cylinder experiments by use of pyrophyllite powder
- Trace-element partitioning between immiscible lunar melts: An example from naturally occurring lunar melt inclusions
- Assemblages with titanite (CaTiOSiO4), Ca-Mg-Fe olivine and pyroxenes, Fe-Mg-Ti oxides, and quartz: Part I. Theory
- Assemblages with titanite (CaTiOSiO4), Ca-Mg-Fe olivine and pyroxenes, Fe-Mg-Ti oxides, and quartz: Part II. Application
- The stability of clinopyroxene in the system CaO-MgO-SiO2-TiO2 (CMST)
- Ordering kinetics of Mg-Fe2+ exchange in a Wo43En46Fs11 augite
- Al,Si order in the crystal structure of α-eucryptite (LiAlSiO4)
- TEM-EDX study of weathered layers on the surface of volcanic glass, bytownite, and hypersthene in volcanic ash from Sakurajima volcano, Japan
- Electron microscopic study of the dehydration of diaspore
- Crystal properties and energetics of synthetic kaolinite
- Structures and energies of AlOOH and FeOOH polymorphs from plane wave pseudopotential calculations
- XPS measurement of fivefold and sixfold coordinated sulfur in pyrrhotites and evidence for millerite and pyrrhotite surface species
- Structure of synthetic 6-line ferrihydrite by electron nanodiffraction
- Atomic structures of planar defects in oxybiotite
- Potassium hydrogen disilicate: A possible model compound for 17O NMR spectra of hydrous silicate glasses
- Strain analysis of phase transitions in (Ca,Sr)TiO3 perovskites
- Triclinic liddicoatite and elbaite in growth sectors of tourmaline from Madagascar
- Letter. A simple inorganic process for formation of carbonates, magnetite, and sulfides in martian meteorite ALH84001
