Home Development and implementation of k0-INAA standardization at 10 MW Pakistan research reactor-1
Article
Licensed
Unlicensed Requires Authentication

Development and implementation of k0-INAA standardization at 10 MW Pakistan research reactor-1

  • Mohammad Wasim , Mohammad Arif , Jamshed Hussain Zaidi and Yasir Anwar
Published/Copyright: December 4, 2009

Abstract

The k0-method has been developed for 10 MW Pakistan Research Reactor (PARR-1). It involved the full energy peak efficiency calibration of HPGe detector for different counting geometries and characterization of neutron flux at three irradiation channels. Neutron flux was characterized for thermal to epithermal flux ratio, epithermal flux shape factor, modified spectral index, Westcott´s g-factor and fast flux. The method was validated by analyzing IAEA-SL1 (lake sediment) and NIST-SRM-1572 (citrus leaves). All calculations were performed in Excel. The results revealed most of the elements with good accuracy.


* Correspondence address: Chemistry Division, Pakistan Institute of Nuclear Science & Technology, P.O. Nilore, Islamabad, Pakistan,

Published Online: 2009-12-04
Published in Print: 2009-11

© by Oldenbourg Wissenschaftsverlag, München, Germany

Downloaded on 22.10.2025 from https://www.degruyterbrill.com/document/doi/10.1524/ract.2009.1657/html
Scroll to top button