Frontmatter

Articles in the same Issue

1. Frontmatter
2. Simulation and analysis of the over-expanded flow field in asymmetric nozzles with lateral expansion
3. Design optimization of a fluidic thrust vectoring system based on coanda effect using meta-models
4. Research on vibration damping of integral squeeze film damper based on fan rotor tester of turbofan
5. Influence of conical shaft stiffness on the dynamic characteristics of flexible rotor
6. A novel design methodology for preventing dislocation in the Zig-zag shroud
7. Numerical study of effect of the casing slot on the tip leakage vortex and vortex cavitation of a fuel pump
8. Multi-parameter study on array-jets impingement with crossflow temperature effect
9. Exploration of shock-induced flow dynamics and turbulence-driven combustion optimization in advanced cavity configurations of hydrogen fueled scramjet combustors
10. A part-load performance analysis method for gas turbines based on the stage by stages model of the power turbine
11. Effect of lip-thickness on rectangular nozzle co-flowing subsonic jet
12. Numerical analysis of pollutant formation and exhaust emission in a short annular combustor under part load operation
13. Analysis of leakage characteristics and structural optimization of two-stage floating ring seal
14. Hypersonic boundary layer flow at an axisymmetric stagnation point on a blunt body
15. Numerical simulations of a turbulent lifted hydrogen flame in vitiated coflow with flamelet generated manifold approach
16. Optimization of labyrinth seal leakage with independently varied tooth parameters using efficient global optimization
17. Investigations of modified cooling hole injection angle configurations for improved trench film cooling performance
18. Influence of non-axisymmetric endwall profiling under incoming vortex on the corner separation of a diffusion cascade
19. Impact of annular ribs in sudden expansion flow conditions to control base pressure
20. Effect of preheated swirling multi-annular jets on mixing and flow characteristics in various expanded confinements