Article
Publicly Available
Frontmatter
Published/Copyright:
February 11, 2021
Published Online: 2021-02-11
Published in Print: 2021-03-23
© 2021 Walter de Gruyter GmbH, Berlin/Boston
Articles in the same Issue
- Frontmatter
- Investigation of a High Pressure Ratio Centrifugal Compressor with Wedge Diffuser and Pipe Diffuser
- Qualification of a Small Gas Turbine Engine as a Starter Unit
- Creep Life Prediction of Aircraft Turbine Disc Alloy Using Continuum Damage Mechanics
- Obtaining Dynamic Responses of Rotor from a Synchronizing Derived System Driven by Responses of Some Elastic Supports
- Effect of Swirling Secondary Flow on the Under-expanded Non-circular Supersonic Jets
- Life enhancement of Nozzle Guide Vane of an Aero Gas Turbine Engine through Pack Aluminization
- Investigation on the Aerodynamic Performance of the Compressor Cascade Using Blended Blade and End Wall
- Numerical Simulation of Terminal Shock Oscillation in Over/Under Turbine-Based Combined-Cycle Inlet
- Model Simulation and Design Optimization of a Can Combustor with Methane/Syngas Fuels for a Micro Gas Turbine
- Matching Performance Prediction Between Core Driven Fan Stage and High Pressure Compressor
- Effect of Variable Geometry Guide-Vane with Cylindrical Endwalls on Turbine Stage Performance
Articles in the same Issue
- Frontmatter
- Investigation of a High Pressure Ratio Centrifugal Compressor with Wedge Diffuser and Pipe Diffuser
- Qualification of a Small Gas Turbine Engine as a Starter Unit
- Creep Life Prediction of Aircraft Turbine Disc Alloy Using Continuum Damage Mechanics
- Obtaining Dynamic Responses of Rotor from a Synchronizing Derived System Driven by Responses of Some Elastic Supports
- Effect of Swirling Secondary Flow on the Under-expanded Non-circular Supersonic Jets
- Life enhancement of Nozzle Guide Vane of an Aero Gas Turbine Engine through Pack Aluminization
- Investigation on the Aerodynamic Performance of the Compressor Cascade Using Blended Blade and End Wall
- Numerical Simulation of Terminal Shock Oscillation in Over/Under Turbine-Based Combined-Cycle Inlet
- Model Simulation and Design Optimization of a Can Combustor with Methane/Syngas Fuels for a Micro Gas Turbine
- Matching Performance Prediction Between Core Driven Fan Stage and High Pressure Compressor
- Effect of Variable Geometry Guide-Vane with Cylindrical Endwalls on Turbine Stage Performance