Article
Publicly Available
Frontmatter
Published/Copyright:
March 1, 2014
Published Online: 2014-3-1
Published in Print: 2014-3-1
©2014 by Walter de Gruyter Berlin/Boston
Articles in the same Issue
- Frontmatter
- Investigation on the Influence of Various Mainstream Pressure Gradients on the Film Cooling Performances of Cylindrical Hole and Expansion Shaped Holes
- Experimental Investigation of an Active Elastic Support/Dry Friction Damper on Vibration Control of Rotor Systems
- Influencing Factors on the Performance of Pulse Detonation Engine at Test Bench
- Pipe Diffuser for Radial and Axial-centrifugal Compressor
- Noise Power Spectrum Research of the Turboprop Engine Test
- Large Eddy Simulation of a Low Speed Subsonic Jet: A Validation Study
- Studies on Downstream Stator with Rotor Re-Staggering and Forward Sweeping in a Subsonic Axial Compressor Stage
- Development of Practical Integral Condition Monitoring System for a Small Turbojet Engine Using MATLAB/SIMULINK and LabVIEW
- Influence of Rib Height on Heat Transfer Augmentation – Application to Aircraft Turbines
Articles in the same Issue
- Frontmatter
- Investigation on the Influence of Various Mainstream Pressure Gradients on the Film Cooling Performances of Cylindrical Hole and Expansion Shaped Holes
- Experimental Investigation of an Active Elastic Support/Dry Friction Damper on Vibration Control of Rotor Systems
- Influencing Factors on the Performance of Pulse Detonation Engine at Test Bench
- Pipe Diffuser for Radial and Axial-centrifugal Compressor
- Noise Power Spectrum Research of the Turboprop Engine Test
- Large Eddy Simulation of a Low Speed Subsonic Jet: A Validation Study
- Studies on Downstream Stator with Rotor Re-Staggering and Forward Sweeping in a Subsonic Axial Compressor Stage
- Development of Practical Integral Condition Monitoring System for a Small Turbojet Engine Using MATLAB/SIMULINK and LabVIEW
- Influence of Rib Height on Heat Transfer Augmentation – Application to Aircraft Turbines
