Home Technology Lamb wave based approach to the determination of elastic and viscoelastic material parameters
Article Publicly Available

Lamb wave based approach to the determination of elastic and viscoelastic material parameters

  • Sarah Johannesmann EMAIL logo , Leander Claes and Bernd Henning
Published/Copyright: August 24, 2021

Published Online: 2021-08-24
Published in Print: 2021-09-27

© 2021 Walter de Gruyter GmbH, Berlin/Boston

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. XXXV. Messtechnisches Symposium
  4. Beiträge
  5. Steifigkeitsmessungen von AFM-Cantilevern
  6. Nutzung eines kommerziellen EMK-Systems als Bestandteil einer Kibble-Waage
  7. Substitutionsmessung von Massenormalen unter Verwendung neuartiger Transferkörper
  8. Schätzung des Verschleißvolumens an Gleitlagern
  9. Direktes Laserschreiben auf Basis von Zwei-Photonen-Absorption mit metrologisch rückführbarer Positionierung
  10. Lamb wave based approach to the determination of elastic and viscoelastic material parameters
  11. Non-invasive aberration correction and adaptive ultrasound imaging with a time reversal virtual array
  12. Schätzung der Segmentspanbildungsfrequenz mithilfe von Körperschallsignalen
  13. Differentielle Laser-Doppler-Vibrometrie für luftgestützte Vibrationsmessungen mit Drohnen
  14. Sensitivity enhanced roll-angle sensor by means of a quarter-waveplate
  15. Optische Messung zahnindividueller Formparameter am Beispiel von Geradverzahnungen
  16. Analyse eines fehlerkompensierten Lasertriangulationssystems
  17. Investigation of measurement data of low-coherence interferometry at tilted surfaces in the 3D spatial frequency domain
  18. Low-cost electromyograph combined with markerless pose detection
  19. Wide Programmable Range Fourth-Order, Fully-Differential Sallen-Key MOSFET-C LPF for Impedance Spectroscopy Measurements and Self-X Sensory Electronics in Industry 4.0
  20. Gaussian Process Regression Based Robust Optimization with Observer Uncertainty for Reconfigurable Self-x Sensory Electronics for Industry 4.0
  21. Bewertung der Innenraumluftqualität über VOC-Messungen mit Halbleitergassensoren - Kalibrierung, Feldtest, Validierung
  22. Erfassung geometrischer Daten des Schmelzbades zur Regelung eines WAAM-Prozesses
  23. Comparison of Multiple Moisture-Measurement Techniques Applied on Biological Tissue
  24. Tuning capacitance wire-mesh sensor gains for measurement of conductive fluids
  25. Adaptive Spiking Sensor System Based on CMOS Memristors Emulating Long and Short-Term Plasticity of Biological Synapses for Industry 4.0 Applications
Downloaded on 8.3.2026 from https://www.degruyterbrill.com/document/doi/10.1515/teme-2021-0070/html
Scroll to top button