Article Open Access

Large displacement static analysis of a cantilever Timoshenko beam composed of functionally graded material

  • EMAIL logo , and
Published/Copyright: June 10, 2011
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Science and Engineering of Composite Materials
From the journal Science and Engineering of Composite Materials Volume 18 Issue 1-2

Published Online: 2011-06-10
Published in Print: 2011-06-01

©2011 by Walter de Gruyter Berlin Boston

Articles in the same Issue

  1. Publisher's Note
  2. A new start for Science and Engineering of Composite Materials
  3. News
  4. Implementing a new manuscript submission system
  5. Original Articles
  6. An investigation into the wear behaviour of TiB2 particle reinforced aluminium composites produced by mechanical alloying
  7. Quantitative solution on dosage of repair agent for healing of cracks in materials: short capsule model vs. two-dimensional crack pattern
  8. Large displacement static analysis of a cantilever Timoshenko beam composed of functionally graded material
  9. Thermal stresses in rings of thermoplastic composites made by automated fiber placement process
  10. Electrical and dielectric sensitivities to thermal processes in carbon nanofiber/high-density polyethylene composites
  11. Effects of loading adjustment on the reliability degradation of composites
  12. Strengthening of reinforced concrete corbels with GFRP overlays
  13. Characterization of polypropylene composites reinforced with flax fibers treated by mechanical and alkali methods
  14. Effect of water environment on jute/polypropylene composites
  15. Increase of bending strength and maximum deflection of concrete reinforced with CFRP strips
  16. Towards a sustainable concrete: “sandless” concrete
  17. Application of fiber optic sensors for elevated temperature testing of polymer matrix composite materials
https://doi.org/10.1515/secm.2011.005
Keywords for this article
finite element analysis; functionally graded materials; non-linear static analysis; Timoshenko beam
Creative Commons
BY-NC-ND 3.0

Articles in the same Issue

  1. Publisher's Note
  2. A new start for Science and Engineering of Composite Materials
  3. News
  4. Implementing a new manuscript submission system
  5. Original Articles
  6. An investigation into the wear behaviour of TiB2 particle reinforced aluminium composites produced by mechanical alloying
  7. Quantitative solution on dosage of repair agent for healing of cracks in materials: short capsule model vs. two-dimensional crack pattern
  8. Large displacement static analysis of a cantilever Timoshenko beam composed of functionally graded material
  9. Thermal stresses in rings of thermoplastic composites made by automated fiber placement process
  10. Electrical and dielectric sensitivities to thermal processes in carbon nanofiber/high-density polyethylene composites
  11. Effects of loading adjustment on the reliability degradation of composites
  12. Strengthening of reinforced concrete corbels with GFRP overlays
  13. Characterization of polypropylene composites reinforced with flax fibers treated by mechanical and alkali methods
  14. Effect of water environment on jute/polypropylene composites
  15. Increase of bending strength and maximum deflection of concrete reinforced with CFRP strips
  16. Towards a sustainable concrete: “sandless” concrete
  17. Application of fiber optic sensors for elevated temperature testing of polymer matrix composite materials
Downloaded on 5.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/secm.2011.005/html
Scroll to top button