Article Publicly Available

Frontmatter

Published/Copyright: December 1, 2017
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
Science and Engineering of Composite Materials
From the journal Science and Engineering of Composite Materials Volume 24 Issue 6

Published Online: 2017-12-1
Published in Print: 2017-11-27

©2017 Walter de Gruyter GmbH, Berlin/Boston

Articles in the same Issue

  1. Frontmatter
  2. Review
  3. Influences of egg white-egg yolk MnO2-NiO/γ-Al2O3 catalytic activity on the desulfurization performance
  4. Original Articles
  5. Effect of reinforcement content on the density, mechanical and tribological properties of Ti3SiC2/Al2O3 hybrid reinforced copper-matrix pantograph slide
  6. Effects of manufacturing environments on the residual stresses in a SiC/Ti metal-matrix composite
  7. Synthesis of poly(methylcarbazole) and its nanoclay and nanozinc composites and corrosion protection performances on stainless steel Type 304
  8. Numerical study of Ti/Al/Mg three-layer plates on the interface behavior in explosive welding
  9. Study of surface defects and crystallinity of MWCNTs growth in FCCVD
  10. Wear analysis of the composite coating in a long sliding time by dissipated energy approach
  11. The mechanical behaviour of adhesively bonded composite joints under repeated axial impacts at different temperatures
  12. Effect of nano-BaTiO3 on thermal, mechanical, and electrical properties of HDDA/TPA photopolymer prepared by a digital light processor RP machine
  13. Cell wall material strain hardening on dynamic responses of closed-cell foams
  14. Effect of crude oil and well stream chemical on glass fiber epoxy composite pipes
  15. Surface modification on dispersion and enhancement of PVA fibers in fiber-reinforced cementitious composites
  16. Bond performance of basalt fiber-reinforced polymer bars in conventional Portland cement concrete: a relative comparison with steel rebar using the hinged beam approach
  17. Fire protection design for composite lattice sandwich structure
  18. Research on trajectory planning of non-developable surface for automated tape placement processing of composite
  19. A 3D computational meshfree model for the mechanical and thermal buckling analysis of rectangular composite laminated plates with embedded delaminations
  20. Non-linear dynamic response and vibration of an imperfect three-phase laminated nanocomposite cylindrical panel resting on elastic foundations in thermal environments
https://doi.org/10.1515/secm-2017-frontmatter6

Articles in the same Issue

  1. Frontmatter
  2. Review
  3. Influences of egg white-egg yolk MnO2-NiO/γ-Al2O3 catalytic activity on the desulfurization performance
  4. Original Articles
  5. Effect of reinforcement content on the density, mechanical and tribological properties of Ti3SiC2/Al2O3 hybrid reinforced copper-matrix pantograph slide
  6. Effects of manufacturing environments on the residual stresses in a SiC/Ti metal-matrix composite
  7. Synthesis of poly(methylcarbazole) and its nanoclay and nanozinc composites and corrosion protection performances on stainless steel Type 304
  8. Numerical study of Ti/Al/Mg three-layer plates on the interface behavior in explosive welding
  9. Study of surface defects and crystallinity of MWCNTs growth in FCCVD
  10. Wear analysis of the composite coating in a long sliding time by dissipated energy approach
  11. The mechanical behaviour of adhesively bonded composite joints under repeated axial impacts at different temperatures
  12. Effect of nano-BaTiO3 on thermal, mechanical, and electrical properties of HDDA/TPA photopolymer prepared by a digital light processor RP machine
  13. Cell wall material strain hardening on dynamic responses of closed-cell foams
  14. Effect of crude oil and well stream chemical on glass fiber epoxy composite pipes
  15. Surface modification on dispersion and enhancement of PVA fibers in fiber-reinforced cementitious composites
  16. Bond performance of basalt fiber-reinforced polymer bars in conventional Portland cement concrete: a relative comparison with steel rebar using the hinged beam approach
  17. Fire protection design for composite lattice sandwich structure
  18. Research on trajectory planning of non-developable surface for automated tape placement processing of composite
  19. A 3D computational meshfree model for the mechanical and thermal buckling analysis of rectangular composite laminated plates with embedded delaminations
  20. Non-linear dynamic response and vibration of an imperfect three-phase laminated nanocomposite cylindrical panel resting on elastic foundations in thermal environments
Downloaded on 10.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/secm-2017-frontmatter6/html
Scroll to top button